相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Representative volume elements for matrix-inclusion composites- a computational study on the effects of an improper treatment of particles intersecting the boundary and the benefits of periodizing the ensemble
Matti Schneider et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2022)
Identifying material parameters in crystal plasticity by Bayesian optimization
Jannick Kuhn et al.
OPTIMIZATION AND ENGINEERING (2022)
An FE-DMN method for the multiscale analysis of short fiber reinforced plastic components
Sebastian Gajek et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)
Fatigue lifetime prediction with a validated micromechanical short crack model for the ferritic steel EN 1.4003
Erik Natkowski et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
A review of nonlinear FFT-based computational homogenization methods
Matti Schneider
ACTA MECHANICA (2021)
On Sampling Discrete Orientations from XRD for Texture Representation in Aggregates with Varying Grain Size
Aditya Vuppala et al.
CRYSTALS (2021)
A full-field crystal-plasticity analysis of bimodal polycrystals
B. Flipon et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Assessing the reliability of fast Fourier transform-based crystal plasticity simulations of a polycrystalline material near a crack tip
Andrea Rovinelli et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Crystal plasticity modeling of the cyclic behavior of polycrystalline aggregates under non-symmetric uniaxial loading: Global and local analyses
Harris Farooq et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
A strategy for synthetic microstructure generation and crystal plasticity parameter calibration of fine-grain-structured dual-phase steel
Wenqi Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
An efficient solution scheme for small-strain crystal-elasto-viscoplasticity in a dual framework
Daniel Wicht et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
On Quasi-Newton methods in fast Fourier transform-based micromechanics
Daniel Wicht et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2020)
Optimized reconstruction of the crystallographic orientation density function based on a reduced set of orientations
Abhishek Biswas et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2020)
A micro-mechanically motivated phenomenological yield function for cubic crystal aggregates
Alexander Dyck et al.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2020)
A Novel Approach to Discrete Representative Volume Element Automation and Generation-DRAGen
Manuel Henrich et al.
MATERIALS (2020)
Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy
Qingge Xie et al.
ACTA MATERIALIA (2020)
Fast methods for computing centroidal Laguerre tessellations for prescribed volume fractions with applications to microstructure generation of polycrystalline materials
Jannick Kuhn et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Laguerre tessellations and polycrystalline microstructures: a fast algorithm for generating grains of given volumes
D. P. Bourne et al.
PHILOSOPHICAL MAGAZINE (2020)
Micromechanical modeling of fatigue crack initiation in hydrogen atmosphere
Nikolai Arnaudov et al.
MECHANICS OF MATERIALS (2020)
A numerical study of the influence of crystal plasticity modeling parameters on the plastic anisotropy of rolled aluminum sheet
M. Kasemer et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2020)
Generating Input Data for Microstructure Modelling: A Deep Learning Approach Using Generative Adversarial Networks
Felix Puetz et al.
MATERIALS (2020)
Representation of Hashin-Shtrikman Bounds in Terms of Texture Coefficients for Arbitrarily Anisotropic Polycrystalline Materials
Mauricio Lobos Fernandez et al.
JOURNAL OF ELASTICITY (2019)
Representative volume element size determination for viscoplastic properties in polycrystalline materials
S. Yang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
DAMASK - The Dusseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
F. Roters et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Micromechanical Modelling of the Cyclic Deformation Behavior of Martensitic SAE 4150-A Comparison of Different Kinematic Hardening Models
Benjamin J. Schaefer et al.
METALS (2019)
Uncertainty Quantification in the Mechanical Response of Crystal Plasticity Simulations
Ritwik Bandyopadhyay et al.
JOM (2019)
Micromechanical Modeling of Fatigue Crack Nucleation around Non-Metallic Inclusions in Martensitic High-Strength Steels
Benjamin Josef Schaefer et al.
METALS (2019)
Microstructure and property based statistically equivalent RVEs for polycrystalline-polyphase aluminum alloys
Xiaohui Tu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Numerical study of inclusion parameters and their influence on fatigue lifetime
Karl Gillner et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Generation of 3D representative volume elements for heterogeneous materials: A review
Swantje Bargmann et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Nearly uniform sampling of crystal orientations
Romain Quey et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2018)
The sequential addition and migration method to generate representative volume elements for the homogenization of short fiber reinforced plastics
Matti Schneider
COMPUTATIONAL MECHANICS (2017)
Numerically predicted high cycle fatigue properties through representative volume elements of the microstructure
Karl Gillner et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Prediction of plasticity and damage initiation behaviour of C45E+N steel by micromechanical modelling
B. Wu et al.
MATERIALS & DESIGN (2017)
Orientations - perfectly colored
G. Nolze et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2016)
Materials design for the anisotropic linear elastic properties of textured cubic crystal aggregates using zeroth-, first- and second-order bounds
Mauricio Lobos et al.
INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2015)
Representation of Hashin-Shtrikman bounds of cubic crystal aggregates in terms of texture coefficients with application in materials design
Thomas Boehlke et al.
ACTA MATERIALIA (2014)
Efficient fixed point and Newton-Krylov solvers for FFT-based homogenization of elasticity at large deformations
Matthias Kabel et al.
COMPUTATIONAL MECHANICS (2014)
Parametric Representation of 3D Grain Ensembles in Polycrystalline Microstructures
Aaron Spettl et al.
JOURNAL OF STATISTICAL PHYSICS (2014)
DREAM. 3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Michael A. Groeber et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2014)
Non-linear extension of FFT-based methods accelerated by conjugate gradients to evaluate the mechanical behavior of composite materials
Lionel Gelebart et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
ON THE SOLVABILITY OF MAXIMUM ENTROPY MOMENT PROBLEMS IN TEXTURE ANALYSIS
Michael Junk et al.
MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES (2012)
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
R. Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
F. Roters et al.
ACTA MATERIALIA (2010)
FFT-based methods for the mechanics of composites: A general variational framework
S. Brisard et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
Microstructure-sensitive computational modeling of fatigue crack formation
D. L. McDowell et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Accelerating a FFT-based solver for numerical homogenization of periodic media by conjugate gradients
Jan Zeman et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2010)
Elastic properties of polycrystalline microcomponents
T. Boehlke et al.
MECHANICS OF MATERIALS (2010)
Microstructure sensitive design for performance optimization
David T. Fullwood et al.
PROGRESS IN MATERIALS SCIENCE (2010)
Selecting a set of discrete orientations for accurate texture reconstruction
Philip Eisenlohr et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
Rotation manifold SO(3) and its tangential vectors
Jari Makinen
COMPUTATIONAL MECHANICS (2008)
A novel pole figure inversion method: specification of the MTEX algorithm
R. Hielscher et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2008)
A texture discretization technique adapted to polycrystalline aggregates with non-uniform grain size
Maxime A. Melchior et al.
COMPUTATIONAL MATERIALS SCIENCE (2006)
Texture simulation based on tensorial Fourier coefficients
Thomas Boehlke
COMPUTERS & STRUCTURES (2006)
Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242
Dhyanjyoti Deka et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Crystallographic texture approximation by quadratic programming
T Böhlke et al.
ACTA MATERIALIA (2006)
Application of the maximum entropy method in texture analysis
T Böhlke
COMPUTATIONAL MATERIALS SCIENCE (2005)
Focused ion-beam tomography
AJ Kubis et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Collecting and analyzing microstructures in three dimensions: A fully automated approach
JE Spowart et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)
Determination of the size of the representative volume element for random composites: statistical and numerical approach
T Kanit et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Crystallographic texture induced anisotropy in copper:: An approach based on a tensorial Fourier expansion of the CODF
T Böhlke et al.
JOURNAL DE PHYSIQUE IV (2003)
Isotropic orientation distributions of cubic crystals
T Böhlke et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Orientation distribution functions for microstructures of heterogeneous materials (I) - Directional distribution functions and irreducible tensors
QS Zheng et al.
APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2001)
Orientation distribution functions for microstructures of heterogeneous materials (II) - Crystal distribution functions and irreducible tensors restricted by various material symmetries
QS Zheng et al.
APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2001)
FEM-simulation of the hardening behavior of FCC single crystals
J Harder
ACTA MECHANICA (2001)
分享论文
