☆ 4.7 Article

Low-cost and low-temperature 3D printing for refractory composite inspired by fused deposition modeling and binder jetting

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

W-Cu composites with excellent comprehensive properties

Tielong Han et al.

Summary: This study achieved improved copper connectivity and uniformly dispersed ultrafine tungsten particles in ultrafine grained (UFG) W-Cu composites. The as-prepared UFG W-Cu composites showed enhanced combination of hardness, compressive strength and electrical conductivity compared with previous reports. The strengthening mechanisms of the presented W-Cu composites were quantitatively discussed.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Progress, challenges and potentials/trends of tungsten-copper (W-Cu) composites/pseudo-alloys: Fabrication, regulation and application

Yanlin Wang et al.

Summary: Tungsten-copper (W-Cu) composites/pseudo alloys are highly desired for various applications and recent studies have focused on their fabrication techniques, microstructure, and property regulation. The review covers traditional powder metallurgy, novel sintering/manufacturing techniques, chemical methods for nano-powder synthesis, and microstructure and property regulation by introducing pure metal elements and second phases. Future developments and potential research challenges for W-Cu alloys are also highlighted.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hydrogen embrittlement of bulk W-0.5 wt% ZrC alloy induced by annealing in hydrogen atmosphere

H. Wang et al.

Summary: Annealing of tungsten alloy containing zirconium carbide in a hydrogen atmosphere can induce hydrogen embrittlement, leading to degradation of mechanical properties. The importance of atmosphere choice for annealing tungsten materials to avoid hydrogen embrittlement and ensure good mechanical properties is emphasized.

JOURNAL OF NUCLEAR MATERIALS (2021)

添加到收藏夹

Article Engineering, Chemical

Fabrication and characterization of W -Ni nanocomposites via a facile chemical co-precipitation route

Qiuyu Chen et al.

Summary: A novel method combining chemical co-precipitation and hydrogen reduction was proposed to synthesize nanopowders of W-10wt.%Ni in this study. The average grain size of NiW nanopowders was found to be 18-40 nm, and the addition of Ni influenced the diffusion coefficient, leading to variations in the sintering structure. The form of NiW intermetallic compound inhibited the grain growth of nanopowder.

ADVANCED POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Composites

Chemical and mechanical reprocessed resins and bio-composites based on five epoxidized vegetable oils thermosets reinforced with flax fibers or PLA woven

Chiara Di Mauro et al.

Summary: Through modification of bio-epoxy resins with natural fiber reinforcements, the compatibility between matrix and reinforcement, as well as the thermal and mechanical properties of the resulting composites, were studied using various analytical methods.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

In situ synthesis of core-shell W-Cu nanopowders for fabricating full-densified and fine-grained alloys with dramatically improved performance

Xiaojing Li et al.

Summary: A new one-step thermal plasma synthesis route was developed to construct core-shell W-Cu nanoparticles with size about 30 nm, addressing the issues of homogeneous elemental distribution and short diffusion distance for Cu to form network around W grains. The synthesized nanocomposite powders facilitated fast densification with uniform microstructure and suppressed W grain growth, resulting in a compact with high relative density and hardness.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of Nano Copper on the Densification of Spark Plasma Sintered W-Cu Composites

Vadde Madhur et al.

Summary: In this study, W-Cu composites were fabricated by adding various amounts of nano-copper to tungsten, showing improvements in densification, strength, hardness, and electrical conductivity with increasing copper content. Fractography analysis of tensile tested samples revealed a mixed-mode of fracture, and an increase in nano-copper content resulted in higher electrical conductivity.

NANOMATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

In-situ synthesis of core-shell structure W(WC) composite grains in W-Cu composites fabricated by infiltration

Qiao Chen et al.

Summary: A new method was proposed to prepare WC strengthened W-Cu composites, which exhibited superior properties compared to traditional materials, such as higher relative density, hardness, and conductivity.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of structural materials

Guo Liu et al.

Summary: Over the past 30 years, 3D printing technology has seen rapid development and widespread adoption, with a trade-off between printing resolution and scalability/speed. Various materials have great potential for application in additive manufacturing, driving rapid and tremendous development of materials and methods.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)

添加到收藏夹

Review Multidisciplinary Sciences

Material-structure-performance integrated laser-metal additive manufacturing

Dongdong Gu et al.

Summary: The advancement of laser-metal additive manufacturing has enabled the printing of multimaterial/multifunctional designs to meet the increasing demand from industries such as aviation, aerospace, automobile manufacturing, and energy production. By integrating material-structure-performance, major improvements in performance and function can be achieved through the right materials printed in the right positions and unique structures printed for unique functions. This approach exemplifies the revolution of design and manufacturing strategies in additive manufacturing.

SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Densified W-Cu composite fabricated via laser additive manufacturing

Shuang Su et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

The influence of pre-sintering temperature on the microstructure and properties of infiltrated ultrafine-grained tungsten-copper composites

Yiheng Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

A critical review on the fused deposition modeling of thermoplastic polymer composites

Pavan Kumar Penumakala et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Achieving both high conductivity and reliable high strength for W-Cu composite alloys using spherical initial powders

Longchao Zhuo et al.

VACUUM (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Enhanced mechanical and arc erosion resistant properties by homogenously precipitated nanocrystalline fcc-Nb in the hierarchical W-Nb-Cu composite

Longchao Zhuo et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Synthesis and Characterization of Nanoscale Tungsten Particles with Hollow Superstructure Using Spray Drying Combined with Calcination Process

Panchao Zhao et al.

NANOSCALE RESEARCH LETTERS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Ice-Templated W-Cu Composites with High Anisotropy

Andre Rothlisberger et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and properties of ultrafine-grained W-Cu composites reinforced with tungsten fibers

Longchao Zhuo et al.

MATERIALS LETTERS (2019)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

A review on recent developments in binder jetting metal additive manufacturing: materials and process characteristics

Asier Lores et al.

POWDER METALLURGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and properties of ultrafine-grained W-25 wt.%Cu composites doped with CNTs

Qiao Zhang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Citric acid-assisted combustion-nitridation-denitridation synthesis of well-distributed W-Cu nanocomposite powders

Aimin Chu et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

A novel approach for fabrication of functionally graded W/Cu composites via microwave processing

Chengshang Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Ceramics

pH-induced phase evolution and enhanced physical properties of co-precipitated WO3-CuO powders and reduced bodies for microelectronics packaging

Fangzheng Zhen et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of fabrication method on initial powder characteristics and liquid phase sintering behaviour of tungsten

Mahmut Erol et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)

添加到收藏夹

Article Automation & Control Systems

Sintering densification behaviors and microstructural evolvement of W-Cu-Ni composite fabricated by selective laser sintering

Anru Yan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Processing and consolidation of copper/tungsten

Ching-Fong Chen et al.

JOURNAL OF MATERIALS SCIENCE (2017)

添加到收藏夹

Article Thermodynamics

Study on the co-pyrolysis of rice straw and high density polyethylene blends using TG-FTIR-MS

Xingping Kai et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Chemistry, Physical

Rapid consolidation of ultrafine grained W-30 wt.% Cu composites by field assisted sintering from the sol-gel prepared nanopowders

Yajie Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Chemistry, Physical

Fabrication and properties of the W-30wt%Cu gradient composite with W@WC core-shell structure

Qiao Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrafine-grained W-25 wt-%Cu composite with superior high-temperature characteristics

Qiao Zhang et al.

MATERIALS SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

3D printing of high-strength aluminium alloys

John H. Martin et al.

NATURE (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Effects of Debinding and Sintering Atmosphere on Properties and Corrosion Resistance of Powder Injection Molded 316 L - Stainless Steel

Muhammad Rafi Raza et al.

SAINS MALAYSIANA (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Synergistic enhancing effect for mechanical and electrical properties of tungsten copper composites using spark plasma infiltrating sintering of copper-coated graphene

Wenge Chen et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of submicron-sized initial tungsten powders on microstructure and properties of infiltrated W-25 wt.% Cu alloys

Qiao Zhang et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)

添加到收藏夹

Review Multidisciplinary Sciences

Multiprocess 3D printing for increasing component functionality

Eric MacDonald et al.

SCIENCE (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultra-rapid processing of high-hardness tungsten-copper nanocomposites

Walid M. Daoush et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Assessment of geometrically necessary dislocation levels derived by 3D EBSD

P. J. Konijnenberg et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Engineering, Mechanical

An exploration of binder jetting of copper

Yun Bai et al.

RAPID PROTOTYPING JOURNAL (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Mechanical and functional properties of Invar alloy for μ-MIM

J. Hidalgo et al.

POWDER METALLURGY (2014)

添加到收藏夹

Article Green & Sustainable Science & Technology

Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials

M. E. Sotomayor et al.

RENEWABLE ENERGY (2014)

添加到收藏夹

Article Materials Science, Composites

Fabrication of W-Cu functionally graded materials with high density by particle size adjustment and solid state hot press

Bin-Bin Liu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Article Materials Science, Composites

Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites

S Mohanty et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

添加到收藏夹

Article Polymer Science

Thermal and mechanical properties of cross-linked and uncross-linked linear low-density polyethylene-wax blends

SP Hlangothi et al.

POLYMER DEGRADATION AND STABILITY (2003)

添加到收藏夹

Article Polymer Science

Effect of hydroxides and hydroxycarbonate structure on fire retardant effectiveness and mechanical properties in ethylene-vinyl acetate copolymer

G Camino et al.

POLYMER DEGRADATION AND STABILITY (2001)

添加到收藏夹

Article Engineering, Chemical

A crystal-chemical approach to lubrication by solid oxides

A Erdemir

TRIBOLOGY LETTERS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.