☆ 4.7 Article

Ceramic precursor-phthalonitrile hybrid with improved high heat resistance through constructing binary continuous phases

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Synthesis and properties of a novel autocatalytic phthalonitrile monomer and its copolymerization with multi-functional fluorene-based benzoxazine monomers

Ting Wang et al.

Summary: A novel autocatalytic monomer, OPD, was obtained through nucleophilic substitution, which has good processability and high glass-transition temperature. By modifying OPD monomer with multi-functional fluorene-based benzoxazine monomers (MFFB), the properties of the polymer were further improved.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Janus (BNNS/ANF)-(AgNWs/ANF) thermal conductivity composite films with superior electromagnetic interference shielding and Joule heating performances

Yixin Han et al.

Summary: In this study, Janus (BNNS/ANF)-(AgNWs/ANF) composite films were successfully prepared, which exhibited one side insulating, one side conducting performance. The composite films showed high thermal conductivity, superior electromagnetic interference shielding effectiveness, good mechanical properties, stable temperature-voltage response characteristics, and reliable electrical stability.

NANO RESEARCH (2022)

添加到收藏夹

Article Polymer Science

Ordered Alignment of Liquid Crystalline Graphene Fluoride for Significantly Enhancing Thermal Conductivities of Liquid Crystalline Polyimide Composite Films

Kunpeng Ruan et al.

Summary: In this study, liquid crystalline modification was performed on graphene fluoride (LC-GeF) to achieve ordered alignment, and a thermally conductive liquid crystalline polyimide (LC-PI) matrix was utilized to fabricate thermally conductive LC-GeF/LC-PI composite films. These films exhibited significantly improved thermal conductivity, insulation, mechanical, and thermal properties compared to normal PI films and LC-PI films.

MACROMOLECULES (2022)

添加到收藏夹

Article Polymer Science

Preparation and characterization of a high heat resistant phthalonitrile resin modified by polyborosilazane ceramic precursor

Zi-long Wang et al.

Summary: Phthalonitrile resins with good processability and high heat-resistance were synthesized by modification methods, and organic-inorganic hybrid composites were successfully prepared.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

添加到收藏夹

Review Nanoscience & Nanotechnology

Efficient Preconstruction of Three-Dimensional Graphene Networks for Thermally Conductive Polymer Composites

Hao-Yu Zhao et al.

Summary: Electronic devices generate heat during operation and efficient thermal management is necessary to prevent performance degradation. Graphene, known for its exceptional thermal conductivity, is an ideal filler for fabricating thermally conductive polymer composites. This review article summarizes the factors affecting the thermal conductivity of graphene composites, strategies for fabricating highly thermally conductive graphene/polymer composites, as well as the potential applications and existing challenges in developing preconstructed porous architectures of graphene for thermally conductive composites.

NANO-MICRO LETTERS (2022)

添加到收藏夹

Article Polymer Science

Polyarylene Ether Nitrile and Titanium Dioxide Hybrids as Thermal Resistant Dielectrics

Ren-Bo Wei et al.

Summary: This study introduces a hybrid of polyarylene ether nitrile and titanium dioxide as a thermal resistant dielectric material for capacitors. The self-crosslinked TiO2-PEN hybrids demonstrate improved dielectric constants stable over a wide temperature range, showing potential for applications in harsh environments.

CHINESE JOURNAL OF POLYMER SCIENCE (2021)

添加到收藏夹

Article Materials Science, Composites

Thermally conductive and electrically insulating alumina-coated graphite/phthalonitrile composites with thermal stabilities

Xianyuan Liu et al.

Summary: The study successfully synthesized Al2O3@graphite core-shell particles with excellent thermal conductivity and electrical insulation properties, and fabricated thermally stable phthalonitrile composites, which could potentially be used for high-temperature thermal management applications.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Polymer Science

Synthesis and characterization of bisphthalonitrile-terminated polyimide precursors with unique advantages in processing and adhesive properties

Caizhao Liu et al.

Summary: The synthesized polyimide precursors demonstrated lower melt temperature and good solubility, while the cured resins based on curing accelerator achieved high glass transition temperature and char yields. The para-linked prepolymers derived from 4-amino-3,5-xylenol showed the highest lap shear strength at 300 degrees C, indicating potential application as high temperature structural adhesives.

POLYMER (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Engineering toughening mechanisms in architectured ceramic-based bioinspired materials

A. Rahimizadeh et al.

Summary: This study investigates the preparation of bioinspired multilayered architectured ceramics and evaluates their toughening and deformation mechanisms under low-velocity impact load regimes, using a combination of advanced computational models and 3D digital image correlation (DIC). The results reveal that the primary source of toughening in the architectured ceramic systems is extrinsic, resulting from extensive crack deflection and delamination, resulting in a significant increase in toughness compared to plain ceramics.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Thermodynamics

Curing behavior studies of phenol-containing phthalonitrile monomer for advanced composite materials

Hanqi Zhang et al.

Summary: The study investigated the curing behavior of phenol-containing phthalonitrile monomer and found that it has a strong reactivity with significantly lower activation energy compared to phenol-catalyzed reactions. By verifying the accuracy of the curing kinetic equation and predicting the curing time, it provided important insights for the application of phenol-containing phthalonitrile polymer.

THERMOCHIMICA ACTA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Designing phthalonitrile/hydroxyl compound systems for high performance CFRP composites

Xulin Yang et al.

Summary: High mechanical residues at elevated temperatures are essential for the engineering applications of PNP/hydroxyl compounds/CF composites in special fields like aerospace. The study assessed the high temperature mechanical performances of these composites, showing retention rates of mechanical properties over 90% after aging at 300 degrees C and 350 degrees C for 50 hours. This indicates that PNP/hydroxyl compounds/CF composites can be utilized as high performance engineering materials with excellent comprehensive mechanical properties.

MATERIALS RESEARCH EXPRESS (2021)

添加到收藏夹

Article Chemistry, Physical

Covalently bonded silica interfacial layer for simultaneously improving thermal and dielectric performance of copper/epoxy composite

Kun Zheng et al.

Summary: The study proposes a new strategy to improve the performance of Cu/epoxy composite by preparing a dense silica interfacial layer containing specific reactive groups, enhancing thermal conductivity and dielectric performance.

SURFACES AND INTERFACES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lightweight, Flexible Cellulose-Derived Carbon Aerogel@Reduced Graphene Oxide/PDMS Composites with Outstanding EMI Shielding Performances and Excellent Thermal Conductivities

Ping Song et al.

Summary: By dissolving cotton in a NaOH/urea solution, cellulose aerogels were obtained and further processed to prepare cellulose carbon aerogels@reduced graphene oxide aerogels. The resulting composites showed excellent EMI shielding effectiveness, thermal stability, and thermal conductivity, making them promising for lightweight and flexible EMI shielding applications.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Article Materials Science, Composites

Improved toughness of phthalonitrile composites through synergistic toughening methods

Jinsong Sun et al.

Summary: This study successfully improved the impact resistance and heat resistance of phthalonitrile polymers by synergistically toughening with specific composite materials, providing a new approach to addressing the brittleness issue in polymers.

COMPOSITES COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Junjie Qian et al.

Summary: 3D-carbon fiber felts reinforced ceramic-based composites have excellent high-temperature mechanical performance, low density, and low thermal conductivity. By in-situ growing SiC nanowires on the surface of carbon fiber, the compressive strength of the composite was significantly enhanced by the brittle fracture of SiC nanowires and carbon fibers, as well as crack deflection.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

Synchronously improved electromagnetic interference shielding and thermal conductivity for epoxy nanocomposites by constructing 3D copper nanowires/thermally annealed graphene aerogel framework

Xutong Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Polymer Science

Kinetic study of the multistep thermo-oxidative degradation of thermosetting siloxane-containing polyimide and unmodified polyimide

Yi Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Thermal and water absorption properties of cyanate ester resins modified by fluoride-containing and silicone-containing components

Shixin Pei et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2020)

添加到收藏夹

Article Polymer Science

In situ preparation and properties of phthalonitrile resin/hexagonal boron nitride composites

Xinggang Chen et al.

HIGH PERFORMANCE POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Long-term Thermo-oxidative Degradation Modeling of a Carbon Fiber Reinforced Polyimide Composite: Multistep Degradation Behaviors and Kinetics

Yi Liu et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and properties of a thioether bonded phthalonitrile resin

Shengnan Bai et al.

MATERIALS TODAY COMMUNICATIONS (2020)

添加到收藏夹

Article Polymer Science

SiBCN ceramic precursor modified phthalonitrile resin with high thermal resistance

Zi-long Wang et al.

HIGH PERFORMANCE POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Chemical structure and curing dynamics of bisphenol S, PEEKTM-like, and resveratrol phthalonitrile thermoset resins

Boris Dyatkin et al.

JOURNAL OF POLYMER SCIENCE (2020)

添加到收藏夹

Article Thermodynamics

Curing kinetics and thermal properties of imide containing phthalonitrile resin using aromatic amines

Devendra Kumar et al.

THERMOCHIMICA ACTA (2020)

添加到收藏夹

Article Polymer Science

High temperature phthalonitrile nanocomposites with silicon based nanoparticles of different nature and surface modification: Structure, dynamics, properties

Vladimir Bershtein et al.

POLYMER (2019)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis and pyrolysis mechanism of a novel polymeric precursor for SiBN ternary ceramic fibers

Yong Liu et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Chemistry, Physical

Universal Kinetic Description for Thermal Decomposition of Copper(II) Hydroxide over Different Water Vapor Pressures

Masahiro Fukuda et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Coal Waste as a Promising Raw Material for the Production of Heat-Resistant Refractory β-Sialon Ceramics

L. A. Kost et al.

SOLID FUEL CHEMISTRY (2019)

添加到收藏夹

Article Polymer Science

High-temperature hybrid phthalonitrile/amino-MMT nanocomposites: Synthesis, structure, properties

V. A. Bershtein et al.

EXPRESS POLYMER LETTERS (2019)

添加到收藏夹

Article Materials Science, Composites

On the preparation and properties investigations of highly performant MXene (Ti3C2(OH)2) nanosheets-reinforced phthalonitrile nanocomposites

Mehdi Derradji et al.

ADVANCED COMPOSITES LETTERS (2019)

添加到收藏夹

Article Polymer Science

High-performance polymeric nanocomposites from phthalonitrile resin and silane surface-modified Ti3AlC2 MAX phase

Abdelkhalek Henniche et al.

HIGH PERFORMANCE POLYMERS (2018)

添加到收藏夹

Article Materials Science, Composites

High performance nanocomposites from Ti3SiC2 MAX phase and phthalonitrile resin

Mehdi Derradji et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Oligosilylarylnitrile: The Thermoresistant Thermosetting Resin with High Comprehensive Properties

Mingcun Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Polymer Derived Si-B-C-N Ceramics: 30 Years of Research

Antoine Viard et al.

ADVANCED ENGINEERING MATERIALS (2018)

添加到收藏夹

Article Polymer Science

Reduced curing kinetic energy and enhanced thermal resistance of phthalonitrile resins modified with inorganic particles

Yuanyuan Song et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2018)

添加到收藏夹

Article Chemistry, Applied

Copolymerization of mono and difunctional benzoxazine monomers with bio-based phthalonitrile monomer: Curing behaviour, thermal, and mechanical properties

Abdul Qadeer Dayo et al.

REACTIVE & FUNCTIONAL POLYMERS (2018)

添加到收藏夹

Article Polymer Science

The effect of nitrile-functionalized nano-aluminum oxide on the thermomechanical properties and toughness of phthalonitrile resin

Shuyan Shan et al.

HIGH PERFORMANCE POLYMERS (2017)

添加到收藏夹

Article Chemistry, Physical

Significant Enhancement of Thermal Conductivity in Bioinspired Freestanding Boron Nitride Papers Filled with Graphene Oxide

Yimin Yao et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Article Materials Science, Ceramics

Pyrolysis of polyborosilazane and its conversion into SiBN ceramic

K. K. Ge et al.

ADVANCES IN APPLIED CERAMICS (2014)

添加到收藏夹

Article Polymer Science

Preparation and properties of novel hybrid resins based on acetylene-functional benzoxazine and polyvinylsilazane

Guangzhu Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Review Materials Science, Ceramics

Progress of a novel non-oxide Si-B-C-N ceramic and its matrix composites

Pengfei Zhang et al.

JOURNAL OF ADVANCED CERAMICS (2012)

添加到收藏夹

Article Polymer Science

Polyarylacetylene blends with improved processability and high thermal stability

Ming-Cun Wang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.