☆ 4.7 Article

Indentation and puncture response characteristics of flax fibre-reinforced polymer pipes

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Dynamic behaviour of flax fibre-reinforced polymer pipes subjected to harmonic excitation

Saeed Eyvazinejad Firouzsalari et al.

Summary: The study investigates the substitution of flax fibres for synthetic fibres in fibre-reinforced polymer composites for more sustainable industrial practices, including the manufacturing and testing of three flax FRP pipes with different wall thicknesses under various conditions. Experimental and finite element modelling results show different strain distributions in the pipes under different conditions.

JOURNAL OF COMPOSITE MATERIALS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Bending behaviour of flax fabric-reinforced epoxy pipes

Saeed Eyvazinejad Firouzsalari et al.

Summary: The experimental results showed that increasing the diameter and number of fabric layers of FFRE pipes can enhance their bending stiffness and maximum bending moment, giving them greater deformation capabilities compared to pipes made from synthetic fiber composites while maintaining comparable maximum bending moments. The FFRE pipes also demonstrated no water seepage beyond pipe failure, indicating their significant potential as a viable alternative to conventional materials.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Marine

Indentation response of pressurized sandwich pipes filled with cement composite under lateral loading

Feng Wan et al.

Summary: The study investigates the denting behavior of sandwich pipes in deepwater environment through numerical simulations and parametric studies, revealing the influence of factors such as internal and external pressure, tip radius, width and orientation of the denting tool on the pipe's denting response.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Experimental study of flax fabric-reinforced epoxy pipes subjected to internal pressure

Saeed Eyvazinejad Firouzsalari et al.

Summary: The substitution of flax fibre for synthetic fibres in fibre-reinforced polymers in the construction industry is effective for achieving sustainability. Internal pressure testing on FFRE pipes showed that the diameter and number of flax fabric layers have a significant impact on pipe strains related to leakage and bursting.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Environmentally friendly recycling system for epoxy resin with dynamic covalent bonding

Hsing-Ying Tsai et al.

Summary: This study introduces an environmentally friendly recycling system for epoxy resin using glutathione, which enables the regeneration of new epoxy materials with approximately 90% of initial mechanical strength. It provides a new perspective on the decomposition and recycling of thermosetting networks under more environmentally friendly conditions.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2021)

添加到收藏夹

Article Mechanics

Flax fabric-reinforced epoxy pipes subjected to lateral compression

Saeed Eyvazinejad Firouzsalari et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Construction & Building Technology

Free-spanning and base-supported tubes subjected to combined axial compression and indentation loads

Saeed Eyvazinejad Firouzsalari et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Sustainable composite panels from non-metallic waste printed circuit boards and automotive plastics

Raghu Raman Rajagopal et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Seismic retrofitting of RC walls externally strengthened by flax-FRP strips

G. Di Luccio et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Review Engineering, Manufacturing

A review of recent developments in natural fibre composites and their mechanical performance

K. L. Pickering et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Reinforced concrete beams strengthened with externally bonded natural flax FRP plates

Liang Huang et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Textiles for Protection Against Microorganism

O. Sauperl

PROCEEDINGS OF THE 5TH INTERNATIONAL CONGRESS IN ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS & EXHIBITION (APMAS '15) (2016)

添加到收藏夹

Article Mechanics

Experimental investigation of the scaling laws in laterally indented filament wound tubes supported with V shaped cradles

F. Hafeez et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Review Engineering, Multidisciplinary

Flax fibre and its composites - A review

Libo Yan et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Construction & Building Technology

Experimental study of flax FRP tube encased coir fibre reinforced concrete composite column

Libo Yan et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Thorough investigation of continuously supported pipelines under combined pre-compression and denting loads

S. Eyvazinejad Firouzsalari et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2013)

添加到收藏夹

Article Materials Science, Composites

Behavior and analytical modeling of natural flax fibre-reinforced polymer tube confined plain concrete and coir fibre-reinforced concrete

Libo Yan et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Construction & Building Technology

Investigation of free-spanned pipeline behavior due to axial forces and local loads

Saeed Eyvazinejad Firouzsalari et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)

添加到收藏夹

Article Engineering, Marine

Behavior of pre-compressed tubes subjected to local loads

S. Eyvazinejad Firouzsalari et al.

OCEAN ENGINEERING (2013)

添加到收藏夹

Review Engineering, Manufacturing

Critical review of recent publications on use of natural composites in infrastructure

David B. Dittenber et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of water ageing on mechanical properties and damage events of two reinforced composite materials: Flax-fibres and glass-fibres

M. Assarar et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Procedures for the strain based assessment of pipeline dents

Dauro Braga Noronha et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2010)

添加到收藏夹

Article Engineering, Mechanical

Assessing mechanical damage in offshore pipelines - Two case studies

K. A. Macdonald et al.

ENGINEERING FAILURE ANALYSIS (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance of hybrid filament wound composite tubes subjected to quasi static indentation

A. Zuraida et al.

MATERIALS & DESIGN (2007)

添加到收藏夹

Article Engineering, Mechanical

Denting of internally pressurized tubes under lateral loads

Spyros A. Karamanos et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2006)

添加到收藏夹

Article Engineering, Mechanical

Modelling transverse cracking damage in thin, filament-wound tubes subjected to lateral indentation followed by internal

S Li et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2005)

添加到收藏夹

Article Engineering, Multidisciplinary

The effect of dents in pipelines - guidance in the pipeline defect assessment manual

A Cosham et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2004)

添加到收藏夹

Article Engineering, Mechanical

Denting of pressurised pipelines under localised radial loading

DC Brooker

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical modelling of pipeline puncture under excavator loading. Part II: parametric study

DC Brooker

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2003)

添加到收藏夹

Article Engineering, Multidisciplinary

Damage, deformation and residual burst strength of filament-wound composite tubes subjected to impact or quasi-static indentation

J Curtis et al.

COMPOSITES PART B-ENGINEERING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.