4.7 Article

Fibers of thermoplastic polymer blends activate multiple interlayer toughening mechanisms

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Self-Assembled NBR/Nomex Nanofibers as Lightweight Rubbery Nonwovens for Hindering Delamination in Epoxy CFRPs

Emanuele Maccaferri et al.

Summary: In this study, concerns about the impact of nanomodification on the thermomechanical properties of composite laminates were addressed by using rubbery nitrile butadiene rubber (NBR)/Nomex mixed nanofibers. Stable noncrosslinked nanofibers were produced via single-needle electrospinning, leading to significant improvement in the interlaminar fracture toughness of CFRPs with rubbery nanofiber modifications. The different nanofibrous morphologies demonstrated varying effects on delamination resistance, with quasi-core-shell nanofibers providing the best reinforcing action.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Polymer Science

Strengthening, toughening, and self-healing for carbon fiber/epoxy composites based onPPESKelectrospun coaxial nanofibers

Shilun Ruan et al.

Summary: The carbon fiber/epoxy composite modified by electrospun coaxial DCPD/PPESK nanofibers showed remarkable self-healing ability and improved mechanical properties. The embedded nanofibers significantly enhanced the toughness of the composite, maintaining good mechanical properties even at low resin content. The flexural strength of the composite recovered close to 90% 2 hours after bending failure, showcasing its self-healing capabilities.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Engineering, Manufacturing

Interleaving light veils to minimise the trade-off between mode-I interlaminar fracture toughness and in-plane properties

S. M. Garcia-Rodriguez et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Materials Science, Multidisciplinary

Nanofibre toughening of dissimilar interfaces in composites

Timo Meireman et al.

MATERIALS & DESIGN (2020)

Article Materials Science, Multidisciplinary

Rubbery nanofibrous interleaves enhance fracture toughness and damping of CFRP laminates

Emanuele Maccaferri et al.

MATERIALS & DESIGN (2020)

Article Engineering, Multidisciplinary

Improvement of the mode I interlaminar fracture toughness of carbon fiber; composite reinforced with electrospun nylon nanofiber

Mohannad T. Aljarrah et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Engineering, Mechanical

Interfacial toughening of carbon/epoxy composite by incorporating styrene acrylonitrile nanofibers

Rasoul Esmaeely Neisiany et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)

Article Engineering, Multidisciplinary

Mixed Mode delamination in carbon nanotube/nanofiber interlayered composites

Ozge Kaynan et al.

COMPOSITES PART B-ENGINEERING (2018)

Article Polymer Science

Self-healing and interfacially toughened carbon fibre-epoxy composites based on electrospun core-shell nanofibres

Rasoul Esmaeely Neisiany et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Article Mechanics

High strain rate response of nanofiber interlayered structural composites

Elif Ozden-Yenigun et al.

COMPOSITE STRUCTURES (2017)

Article Engineering, Manufacturing

Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method

Lode Daelemans et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Article Nanoscience & Nanotechnology

Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms

Lode Daelemans et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Polymer Science

Enhancement of Interlaminar Fracture Toughness of Carbon Fiber/Epoxy Composites Using Silk Fibroin Electrospun Nanofibers

Cuong Vu Manh et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2016)

Article Engineering, Biomedical

DiameterJ: A validated open source nanofiber diameter measurement tool

Nathan A. Hotaling et al.

BIOMATERIALS (2015)

Article Engineering, Manufacturing

Mode I and Mode II interlaminar fracture toughness of composite laminates interleaved with electrospun nanofibre veils

Gareth W. Beckermann et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Pharmacology & Pharmacy

Electrospun polycaprolactone nanofibers as a potential oromucosal delivery system for poorly water-soluble drugs

Tanja Potrc et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)

Article Materials Science, Composites

Design and fabrication of multi-walled hollow nanofibers by triaxial electrospinning as reinforcing agents in nanocomposites

Jamal Seyyed Monfared Zanjani et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)

Article Engineering, Manufacturing

Global and local nanofibrous interlayer toughened composites for higher in-plane strength

K. Bilge et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Article Materials Science, Composites

Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres

Sam van der Heijden et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Article Polymer Science

Rheological, Thermal, and Mechanical Properties of P (3HB-co-4HB) and P (3HB-co-4HB)/EVA Blends

Jing Guo et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

Article Chemistry, Multidisciplinary

Shear Adhesion Strength of Aligned Electrospun Nanofibers

Johnny F. Najem et al.

LANGMUIR (2014)

Proceedings Paper Engineering, Mechanical

On consideration the mode I fracture response of CFRP composite interleaved by composite nanofibers

F. Bovicelli et al.

20TH EUROPEAN CONFERENCE ON FRACTURE (2014)

Article Materials Science, Characterization & Testing

Effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy composite

Bert De Schoenmaker et al.

POLYMER TESTING (2013)

Article Materials Science, Composites

Phase morphology of nanofibre interlayers: Critical factor for toughening carbon/epoxy composites

Jin Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

Article Materials Science, Composites

Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers

K. Bilge et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

Article Polymer Science

Production and characterization of polycaprolactone nanofibers via forcespinning™ technology

Zachary McEachin et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Article Materials Science, Composites

Mode I Interlaminar Fracture Toughness of Nylon 66 Nanofibrilmat Interleaved Carbon/Epoxy Laminates

Shay Hamer et al.

POLYMER COMPOSITES (2011)

Article Materials Science, Multidisciplinary

Novel carbon fiber/epoxy composite toughened by electrospun polysulfone nanofibers

Gang Li et al.

MATERIALS LETTERS (2008)

Editorial Material Multidisciplinary Sciences

Materials science - Structural nanocomposites

Yuris Dzenis

SCIENCE (2008)

Article Nanoscience & Nanotechnology

Effect of supramolecular structure on polymer nanofibre elasticity

Arkadii Arinstein et al.

NATURE NANOTECHNOLOGY (2007)

Article Nanoscience & Nanotechnology

Mechanical performance of laminated composites incorporated with nanofibrous membranes

L. Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Review Polymer Science

Hydrogen bonding, mobility, and structural transitions in aliphatic polyamides

N. Sanjeeva Murthy

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2006)