4.6 Article

Passiflora edulia Sims leaves Extract as renewable and degradable inhibitor for copper in sulfuric acid solution

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Novel gossypol-indole modification as a green corrosion inhibitor for low-carbon steel in aggressive alkaline-saline solution

Elyor Berdimurodov et al.

Summary: This study introduces a novel green corrosion inhibitor for protecting low-carbon steel in aggressive alkaline-saline environments. The inhibitor exhibits excellent inhibition performance, follows Langmuir adsorption isotherm, and demonstrates stable inhibition behavior and high adsorption efficiency.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Chemistry, Physical

Laminarin and sodium molybdate as efficient sustainable inhibitor for Q235 steel in sodium chloride solution

Weiwei Zhang et al.

Summary: Developing high-efficiency and sustainable inhibitors for Q235 steel under neutral saline conditions is of great importance. In this study, laminarin and sodium molybdate were found to have the highest inhibition efficiency as a complex inhibitor in 3.5 wt% NaCl solution, with a good synergistic effect. SEM and SECM analysis revealed that the composite inhibitor could form a multilayer surface protective film, enhancing the corrosion inhibition.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Chemistry, Physical

Exploration of neonicotinoids as novel corrosion inhibitors for copper in a NaCl solution: Experimental and theoretical studies

Jianjia Shen et al.

Summary: Two neonicotinoid derivatives, IMT and IMP, have been developed as copper corrosion inhibitors in a NaCl solution, with inhibition efficiencies greater than 97% at 298 K. These compounds can form a protective film on the copper substrate and create a more hydrophobic surface to shield corrosive ions, making them potential alternatives for corrosion inhibitors in harsh industrial seawater systems.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Chemistry, Physical

Insight into the anti-corrosion performance of two food flavors as eco-friendly and ultra-high performance inhibitors for copper in sulfuric acid medium

Bochuan Tan et al.

Summary: Two food flavors, 2,5-dihydroxy-1,4-dithiane (DDD) and 2,5-dimethy- [1.4] dithiane-2,5-diol (DTDD), were studied as environmentally-friendly inhibitors for copper corrosion in 0.5 mol/L H2SO4 media. Experimental results showed high anti-corrosion efficiency of both DDD and DTDD, with DDD exhibiting superior performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Physical

Development of a nanostructured film based on samarium (III)/polydopamine on the steel surface with superior anti-corrosion and water-repellency properties

Farshad Bahremand et al.

Summary: The latest research focuses on the application of various hydrophobic/superhydrophobic coatings on the surface of metals. Experimental results showed that applying a nanostructured Sm-based film can make the metal surface nearly superhydrophobic, and post-treatment with polydopamine significantly enhances corrosion inhibition performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Hyperbranched molecules having multiple functional groups as effective corrosion inhibitors for Al alloys in aqueous NaCl

Xiaolei Ren et al.

Summary: Hyperbranched molecules GON and GOH are used as inhibitors for Al alloys in NaCl solution. Their inhibition performances are closely related to concentrations and functional groups, with GON showing better performance at low concentrations and GOH being more effective at higher concentrations.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Insight into anti-corrosion mechanism of tetrazole derivatives for X80 steel in 0.5 M H2SO4 medium: Combined experimental and theoretical researches

Bochuan Tan et al.

Summary: Three corrosion inhibitors, MML, DET, and HHT, were studied for their effectiveness on X80 steel in acidic medium using electrochemical methods, surface morphology analysis, and theoretical calculations. The inhibitors showed high corrosion inhibition efficiency, with adsorption on the steel surface consistent with Langmuir single-layer isotherm adsorption. Experimental results and theoretical calculations were in good agreement, demonstrating the potential of these inhibitors for corrosion protection.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Physical

Qualitative and quantitative detection of corrosion inhibitors using surface-enhanced Raman scattering coupled with multivariate analysis

Yajie Wang et al.

Summary: This study proposed a novel strategy for on-site detection and quantitation of corrosion inhibitors using SERS detection and PLSR algorithm. SERS intensities were linearly correlated with inhibitor concentrations, showing good predictive ability and quantification performance.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Anticorrosive properties of a green and sustainable inhibitor from leaves extract of Cannabis sativa plant: Experimental and theoretical approach

R. Haldhar et al.

Summary: The study demonstrates that the leaf extract of Cannabis sativa plant can improve the corrosion resistance of low carbon steel in acidic medium. The experimental results show high inhibition efficiency and the formation of an effective protective layer, which are confirmed by various analytical techniques.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

Improved corrosion resistant performance of mild steel under acid environment by novel carbon dots as green corrosion inhibitor

Vandana Saraswat et al.

Summary: A novel eco-friendly, water-soluble and effective corrosion inhibitor N, S-CDs was synthesized and characterized using various techniques. The inhibitor exhibited significant inhibition efficiency on mild steel corrosion in 15% HCl solution and followed Langmuir adsorption isotherm on MS surface.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

Experimental and theoretical studies of chitosan derivatives as green corrosion inhibitor for oil and gas well acid acidizing

Dingli Wang et al.

Summary: Chitosan derivatives are effective green corrosion inhibitors, with a negative correlation between inhibitor concentration and inhibition efficiency. The erosion effect of the fluid on the corrosion inhibitor layer is proportional to the inlet velocity of the fluid.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

Papaya leaves extract as a novel eco-friendly corrosion inhibitor for Cu in H2SO4 medium

Bochuan Tan et al.

Summary: The papaya leaves extract exhibited excellent anti-corrosion nature as an eco-friendly inhibitor for copper in sulfuric acid medium. An adsorption film on the copper surface formed by Cu-S bond and Cu-N bond was found to resist corrosion.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Combining electrochemical, surface topography analysis, and theoretical calculation methods to insight into the anti-corrosion property of Syzygium samarangense leaf extract

Yang Zhou et al.

Summary: Syzygium samarangense leaf extract (SSLE) was found to have good anti-corrosion ability on steel, with up to 90% inhibition effect at a certain concentration. It can effectively restrict the corrosion reactions, resulting in smooth and bright surface morphology of the steel.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Insight into the corrosion inhibition property of Artocarpus heterophyllus Lam leaves extract

Jiahong He et al.

Summary: In this study, Artocarpus heterophyllus Lam leaves extract (AHLLE) was successfully obtained using the water extraction method. The AHLLE was found to contain compounds with excellent corrosion inhibitor potential, which significantly improves the anti-corrosion efficiency of copper surfaces.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Chemistry, Physical

Investigation on the interfacial behavior of polyorganic inhibitors on a metal surface by DFT study and MD simulation

Anmin Liu et al.

Summary: This study investigated (poly)ethylene glycol and (poly)acrylamide as polyorganic inhibitors through density functional theory and molecular dynamic simulation, analyzing the impact of polymerization degree (DP) on the adsorption behavior on metal surfaces, and determining the optimal DPs. The research provides a theoretical basis and guidance for further studies on corrosion inhibitors.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Stevioside-Zn2+ system as an eco-friendly corrosion inhibitor for C1020 carbon steel in hydrochloric acid solution

Weiwei Zhang et al.

Summary: An effective and biodegradable Stevioside from Stevia leaf was evaluated as a potential pickling inhibitor in combination with Zn2+ cation for carbon steel corrosion. The incorporation of Zn2+ component into the Stevioside layer significantly improved the anti-corrosion properties. The optimal molar ratio of Stevioside/Zn2+ was found to be 1:2, resulting in a high inhibition efficiency of 95.68%.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

S-Thiazine as effective inhibitor of mild steel corrosion in HCl solution: Synthesis, experimental, theoretical and surface assessment

M. Galai et al.

Summary: This study investigates a new organic molecule as a corrosion inhibitor for mild steel in HCl solution, confirming its effectiveness through electrochemical techniques and surface analysis.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Physical

Insight into anti-corrosion nature of Betel leaves water extracts as the novel and eco-friendly inhibitors

Bochuan Tan et al.

Summary: This study utilized a simple and low-cost water extraction method to obtain Betel leaves extracts (BLE), which were investigated as an environmentally-friendly inhibitor. Experimental results showed that BLE exhibited good anti-corrosion properties for Q235 steel and high efficiency under certain conditions. Morphological analysis through SEM and AFM supported the data from electrochemical experiments.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Combining experimental and theoretical researches to insight into the anti-corrosion property of Morinda citrifolia Linn leaves extracts

Jiahong He et al.

Summary: In this study, Morinda citrifolia Linn leaves extracts (MCLLE) were utilized as an eco-friendly corrosion inhibitor on copper materials, showing excellent anti-corrosion properties. Quantum chemistry calculations and molecular dynamics simulations demonstrate that compounds in MCLLE effectively prevent corrosion on copper surfaces, with experimental results confirming that 800 ppm of MCLLE can achieve over 95% corrosion inhibition for copper in sulfuric acid environment.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Multidisciplinary

Proline nitrate ionic liquid as high temperature acid corrosion inhibitor for mild steel: Experimental and molecular-level insights

Ruby Aslam et al.

Summary: The novel [Pro][NO3] IL was synthesized and its corrosion inhibition properties were evaluated, showing significant effectiveness as a high-temperature acid inhibitor with water-repelling and protecting capabilities on mild steel surfaces.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Chemistry, Physical

Novel Schiff base-based cationic Gemini surfactants as corrosion inhibitors for Q235 carbon steel and printed circuit boards

Yongle Zhang et al.

Summary: The synthesized novel Gemini surfactants exhibit excellent anti-corrosion effects with high inhibition efficiency for metal corrosion, showing limitations in their corrosion inhibition for certain metals. Experimental results demonstrate that these surfactants are effective inhibitors for metal corrosion.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Multidisciplinary

The study of m-pentadecylphenol on the inhibition of mild steel corrosion in 1 M HCl solution

Emanuel X. Ricky et al.

Summary: The study introduced m-pentadecylphenol as an eco-friendly corrosion inhibitor derived from cashew nut shell liquid, showing an inhibition efficiency of at least 95% in 1 M HCl solution.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Akebia trifoliate koiaz peels extract as environmentally benign corrosion inhibitor for mild steel in HCl solutions: Integrated experimental and theoretical investigations

Mengqin Zhang et al.

Summary: In this study, pectin components were extracted from akebia trifoliate koiaz peels and investigated for their corrosion inhibition performance on mild steel in HCl medium. The results show that ATKPE exhibits excellent corrosion inhibition characteristics and can form a barrier film firmly attached to the metal surface. The study also involved quantum chemical calculations and molecular dynamics simulations to reveal the inhibition mechanism at the molecular/atomic level.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Chemistry, Physical

Theoretical and surface/electrochemical investigations of walnut fruit green husk extract as effective inhibitor for mild-steel corrosion in 1M HCl electrolyte

A. R. Shahmoradi et al.

Summary: The study investigated the corrosion inhibition property of Juglone extracted from walnut green husk on mild steel samples exposed to an acid electrolyte. The results showed that the efficiency of the inhibitor increased with higher concentration and reached 95% with 800 ppm of green corrosion inhibitor after 8 hours of immersion. Additionally, the extracted GCI functioned as a mixed-type corrosion inhibitor, as revealed by Tafel extrapolated polarization results.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Physical

Insight into the anti-corrosion mechanism Veratrum root extract as a green corrosion inhibitor

Yangyang Feng et al.

Summary: The study found that Veratrum root extract (VRE) has a good anticorrosive effect as an inhibitor for copper corrosion in H2SO4 solution, with an efficiency of up to 97%, and belongs to mixed corrosion inhibitors.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Physical

Probing molecular adsorption/interactions and anti-corrosion performance of poppy extract in acidic environments

Mehdi Tabatabaei Majd et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Chemistry, Physical

Corrosion control of copper wiring by barrier CMP slurry containing azole inhibitor: Combination of simulation and experiment

Tengda Ma et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Article Chemistry, Physical

Investigations on eco-friendly corrosion inhibitors for mild steel in acid environment: Electrochemical, DFT and Monte Carlo Simulation approach

Vandana Saraswat et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Article Materials Science, Multidisciplinary

Green Corrosion Inhibition of Mild Steel by Hydrazone Derivatives in 1.0 M HCl

Abdelkarim Chaouiki et al.

COATINGS (2020)

Article Chemistry, Physical

Bolaamphiphile-class surfactants as corrosion inhibitor model compounds against acid corrosion of mild steel

Maryam Chafiq et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Chemistry, Physical

Anticorrosion effect of a green sustainable inhibitor on mild steel in hydrochloric acid

A. Berrissoul et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Multidisciplinary

Eucalyptus leaf extract as a eco-friendly corrosion inhibitor for mild steel in sulfuric and phosphoric acid solutions

A. M. Abdel-Gaber et al.

INTERNATIONAL JOURNAL OF INDUSTRIAL CHEMISTRY (2020)

Article Chemistry, Physical

Synergistic effect and mechanism of copper corrosion inhibition using cinnamaldehyde and vanillin in HCl solution: An experimental and theoretical approach

Zhen Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Article Chemistry, Physical

Effect of 1-(3-phenoxypropyl) pyridazin-1-ium bromide on steel corrosion inhibition in acidic medium

F. El-Hajjaji et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Chemistry, Multidisciplinary

Adsorption mechanism and synergistic corrosion-inhibiting effect between the green Nettle leaves extract and Zn2+ cations on carbon steel

Mohammad Ramezanzadeh et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Article Biochemistry & Molecular Biology

Evaluation of Ficus tikoua leaves extract as an eco-friendly corrosion inhibitor for carbon steel in HCl media

Qihui Wang et al.

BIOELECTROCHEMISTRY (2019)

Article Chemistry, Physical

Myristic acid based imidazoline derivative as effective corrosion inhibitor for steel in 15% HCl medium

Moses M. Solomon et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Chemistry, Physical

Anti-corrosion of amphoteric metal enhanced by MAO/corrosion inhibitor composite in acid, alkaline and salt solutions

Weixiang Sun et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Chemistry, Applied

C-dideoxyhexosyl flavones from the stems and leaves of Passiflora edulis Sims

Fengqing Xu et al.

FOOD CHEMISTRY (2013)