相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Reduced-Order Model of the Environmental Variation Error of a Precision Five-Axis Machine Tool
Pablo Hernandez-Becerro et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)
Model order reduction of thermo-mechanical models with parametric convective boundary conditions: focus on machine tools
Pablo Hernandez-Becerro et al.
COMPUTATIONAL MECHANICS (2021)
PREDICTION OF THERMAL GROWTH IN A HIGH-SPEED SPINDLE BY CONSIDERING THERMO-MECHANICAL BEHAVIOR
E. Yuksel et al.
MM Science Journal (2021)
A review of the design and optimization of large-scale hydrostatic bearing systems
Michal Michalec et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2021)
Influence of bearing ball recirculation on error motions of linear axes
Gregory W. Vogl et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)
Vibration analysis and cutting simulation of structural nonlinearity for machine tool
Naruhiro Irino et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)
Thermal characteristic analysis of ball screw feed drive system based on finite difference method considering the moving heat source
Yang Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Adjustment of uncertain model parameters to improve the prediction of the thermal behavior of machine tools
Steffen Ihlenfeldt et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
A Hybrid Contact Implementation Framework for Finite Element Analysis and Topology Optimization of Machine Tools
Esra Yuksel et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
Vibration-based health monitoring of ball screw in changing operational conditions
Kai Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effect of joint interfacial contact stiffness on structural dynamics of ultra-precision machine tool
Yu Chang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)
A study on accuracy of porous journal air bearing
Penghai Zhang
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
Contact stiffness of spindle-tool holder based on fractal theory and multi-scale contact mechanics model
Jialan Liu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Substructure Coupling of a Machine Tool in Arbitrary Axis Positions Considering Local Linear Damping Models
Thomas Semm et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
A robust level error estimation method for machine tool installation
Kotaro Mori et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)
Multi-point coupling for tool point receptance prediction
Tony Schmitz et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Study of ball screw system preload monitoring during operation based on the motor current and screw-nut vibration
Tung Lam Nguyen et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Condition monitoring of the feed drive system of a machine tool based on long-term operational modal analysis
Pingjia Jia et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Construction and validation of a theoretical model of the stiffness matrix of a linear ball guide with consideration of carriage flexibility
Van-Canh Tong et al.
MECHANISM AND MACHINE THEORY (2019)
Decoupling and effects of the mechanical vibration on the dynamic precision for the direct-driven machine tool
Xiaojun Yang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Prediction of Comprehensive Thermal Error of a Preloaded Ball Screw on a Gantry Milling Machine
Kuo Liu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
A Dynamic Modeling Approach for Spindle Bearing System Supported by Both Angular Contact Ball Bearing and Floating Displacement Bearing
Songtao Xi et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Low Order Static Load Distribution Model for Ball Screw Mechanisms Including Effects of Lateral Deformation and Geometric Errors
Bo Lin et al.
JOURNAL OF MECHANICAL DESIGN (2018)
Measurement and analysis of friction fluctuations in linear guideways
Tetsuya Miura et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Thermo-mechanical modelling of ball screw preload force variation in different working conditions
A. Oyanguren et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Effects of geometrical errors of guideways on the repeatability of positioning of linear axes of machine tools
Guangming Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Identification of workpiece location on rotary tables to minimize tracking errors in five-axis machining
Jixiang Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
High speed tooltip FRF predictions of arbitrary tool-holder combinations based on operational spindle identification
M. Postel et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Determination of Optimum Preload Considering the Skidding and Thermal Characteristic of High-Speed Angular Contact Ball Bearing
Bin Fang et al.
JOURNAL OF MECHANICAL DESIGN (2018)
A novel nonlinear contact stiffness model of concrete-steel joint based on the fractal contact theory
Yongsheng Zhao et al.
NONLINEAR DYNAMICS (2018)
Continuous measurements with single setup for position-dependent geometric errors of rotary axes on five-axis machine tools by a laser displacement sensor
Yixuan Guo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Research on the axial stiffness softening and hardening characteristics of machine tool spindle system
Jiandong Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Analytical Model of a Multi-Step Straightening Process for Linear Guideways Considering Neutral Axis Deviation
Yongquan Zhang et al.
SYMMETRY-BASEL (2018)
On Hirth Ring Couplings: Design Principles Including the Effect of Friction
Dario Croccolo et al.
ACTUATORS (2018)
Model-Based Installation of Viscoelastic Damper Support for Reduction of Residual Vibration
Kotaro Mori et al.
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY (2018)
Investigations on mother wavelet selection for health assessment of lathe bearings
P. G. Kulkarni et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Investigation of Turbocharger Dynamics Using a Combined Explicit Finite and Discrete Element Method Rotor-Cartridge Model
Matthew D. Brouwer et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2017)
Nonlinear dynamics of the milling head drive mechanism in five-axis CNC machine tools
Pengbing Zhao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Analysis of the machine tool dynamic characteristics in manufacturing space based on the generalized dynamic response model
Congying Deng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Hierarchical error model to estimate motion error of linear motion bearing table
Gaiyun He et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
A systematic approach on analyzing the relationship between straightness & angular errors and guideway surface in precise linear stage
Hao Tang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Effect of frictional heat generation on the temperature distribution in roller linear motion rail surface
De-Jun Cheng et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Thermal performances on angular contact ball bearing of high-speed spindle considering structural constraints under oil-air lubrication
Dexing Zheng et al.
TRIBOLOGY INTERNATIONAL (2017)
Radial magnetic bearings: An overview
Weiyu Zhang et al.
RESULTS IN PHYSICS (2017)
A review of hydrostatic bearing system: Researches and applications
Zhifeng Liu et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
A top-down equivalent stiffness approach for prediction of deviation sources in machine tool joints
Andreas Archenti et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
The Effect of Linear Guide Representation for Topology Optimization of a Five-axis Milling Machine
Esra Yuksel et al.
16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) (2017)
Experimental study on large size bearing ring raceways' precision polishing with abrasive flowing machine (AFM) method
M. Y. Wu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Multipoint Constraints for Modeling of Machine Tool Dynamics
Christian Brecher et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Sliding bearing with adjustable friction properties
T. Engel et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Stiffness modeling of machine tools based on machining space analysis
Xianming Gao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
An improved thermo-mechanical model for vertical machining center
Bing Fang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Research on the dynamics of ball screw feed system with high acceleration
Jun Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
A ballbar test for measurement and identification the comprehensive error of tilt table
Jian-xiong Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
A New Dynamic Model of Ball-Bearing Rotor Systems Based on Rigid Body Element
Hongrui Cao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
The effect of angular misalignment on the running torques of tapered roller bearings
Van-Canh Tong et al.
TRIBOLOGY INTERNATIONAL (2016)
An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations
Linkai Niu et al.
TRIBOLOGY INTERNATIONAL (2016)
Receptance coupling based algorithm for the identification of contact parameters at holder-tool interface
W. Matthias et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2016)
Automatic assembling of bearings including clearance measurement
Nicolas Meier et al.
RESEARCH AND INNOVATION IN MANUFACTURING: KEY ENABLING TECHNOLOGIES FOR THE FACTORIES OF THE FUTURE - PROCEEDINGS OF THE 48TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS (2016)
Design and Optimisation of an Electromagnetic Linear Guide for Ultra-Precision High Performance Cutting
B. Denkena et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Microfluidic balancing concepts for ultraprecision high speed applications
Timo Doergeloh et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Uncertainties in Heat Loss Models of Rolling Bearings of Machine Tools
Bernd Kauschinger et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
A defect-driven diagnostic method for machine tool spindles
Gregory W. Vogl et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
A virtual material-based static modeling and parameter identification method for a BT40 spindle-holder taper joint
Hao Guo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Thermal characteristics analysis and experimental study on the high-speed spindle system
Chi Ma et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Optimal tolerance allocation for precision machine tools in consideration of measurement and adjustment processes in assembly
Junkang Guo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Friction compensation controller for load varying machine tool feed drive
Wonkyun Lee et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
In-process tool point FRF identification under operational conditions using inverse stability solution
O. Ozsahin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Determination of time-dependent thermal contact conductance through IR-thermography
E. M. Burghold et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
Identification of bearing dynamics under operational conditions for chatter stability prediction in high speed machining operations
O. Ozsahin et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Interrupted Measurement Repositioning Using Elastic Averaging
Kyle G. Rowe et al.
TRIBOLOGY LETTERS (2015)
Mathematical modeling and experimental testing of high-speed spindle behavior
Aleksandar Zivkovic et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Condition diagnosis of multiple bearings using adaptive operator probabilities in genetic algorithms and back propagation neural networks
Lili A. Wulandhari et al.
NEURAL COMPUTING & APPLICATIONS (2015)
Electromagnetic Levitation Guide for Use in Ultra-Precision Milling Centres
B. Denkena et al.
CIRPE 2015 - UNDERSTANDING THE LIFE CYCLE IMPLICATIONS OF MANUFACTURING (2015)
Monitoring of distributed defects on HSM spindle bearings
C. de Castelbajac et al.
APPLIED ACOUSTICS (2014)
Analytical modeling of asymmetric multi-segment rotor - bearing systems with Timoshenko beam model including gyroscopic moments
O. Ozsahin et al.
COMPUTERS & STRUCTURES (2014)
Using a double ball bar to identify position-independent geometric errors on the rotary axes of five-axis machine tools
Sitong Xiang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Finite element fractal method for thermal comprehensive analysis of machine tools
Hao Su et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Characteristics of stiffness and contact stress distribution of a spindle-holder taper joint under clamping and centrifugal forces
Chao Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Dynamic Modeling and Vibration Response Simulation for High Speed Rolling Ball Bearings With Localized Surface Defects in Raceways
Linkai Niu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Analyses of contact forces and vibration response for a defective rolling element bearing using an explicit dynamics finite element model
Sarabjeet Singh et al.
JOURNAL OF SOUND AND VIBRATION (2014)
Development of a machine for automatically measuring static/dynamic running parallelism in linear guideways
Tung-Hsien Hsieh et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2014)
Cage Friction in High-Speed Spindle Bearings
Christian Brecher et al.
TRIBOLOGY TRANSACTIONS (2014)
Accuracy analysis of machine tools using Elastically Linked Systems
Andreas Archenti et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Geometric error modeling and compensation for large-scale grinding machine tools with multi-axes
G. S. Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Non-contact measurement of spindle stiffness by using magnetic loading device
Atsushi Matsubara et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Rapid evaluation and optimization of machine tools with position-dependent stability
Mohit Law et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
A new receptance coupling substructure analysis methodology to improve chatter free cutting conditions prediction
P. Albertelli et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Position-Dependent Multibody Dynamic Modeling of Machine Tools Based on Improved Reduced Order Models
Mohit Law et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
FRF based joint dynamics modeling and identification
Majid Mehrpouya et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)
An adjustable kinematic coupling for use in machine tools with a tight structural loop
Gerald Rothenhoefer et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)
Integrated autonomous monitoring of ball screw drives
Hans-Christian Moehring et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Thermal issues in machine tools
Josef Mayr et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Dynamics of the guideway system founded on casting compound
Bartosz Powalka et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
An identification method for spindle rotation error of a diamond turning machine based on the wavelet transform
Dongju Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Investigation of ball screw preload variation based on dynamic modeling of a preload adjustable feed-drive system and spectrum analysis of ball-nuts sensed vibration signals
Guo-Hua Feng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
A New Approach for Including Cage Flexibility in Dynamic Bearing Models by Using Combined Explicit Finite and Discrete Element Methods
Ankur Ashtekar et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2012)
Defect detection in deep groove ball bearing in presence of external vibration using envelope analysis and Duffing oscillator
V. N. Patel et al.
MEASUREMENT (2012)
Shannon wavelet spectrum analysis on truncated vibration signals for machine incipient fault detection
Jie Liu
MEASUREMENT SCIENCE AND TECHNOLOGY (2012)
Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools
Pawel Majda
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2012)
Prediction of machining accuracy degradation of machine tools
Kuang-Chao Fan et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2012)
Method for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect
Hongrui Cao et al.
SENSORS (2012)
Heat generation modeling of ball bearing based on internal load distribution
Chao Jin et al.
TRIBOLOGY INTERNATIONAL (2012)
Holistic Precision Error Model for 5 Axis HSC Machining Centre with Rotating Rolling Units In Direct Drives
J. Jedrzejewski et al.
3RD CIRP CONFERENCE ON PROCESS MACHINE INTERACTIONS (2012)
Thermal modelling of an HSC machining centre to predict thermal error of the feed system
Eckart Uhlmann et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2012)
Modeling linear guide systems with CoFEM: equivalent models for rolling contact
A. Dadalau et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2012)
Simulation of dynamic properties of a spindle and tool system coupled with a machine tool frame
Petr Kolar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
A comparative study on the dynamics of high speed spindles with respect to different preload mechanisms
Hongrui Cao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Thermal error forecast and performance evaluation for an air-cooling ball screw system
Z. Z. Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
An automatic measuring method and system using a light curtain for the thread profile of a ballscrew
Hu-Tian Feng et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2011)
Rolling element bearing diagnostics-A tutorial
Robert B. Randall et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)
Wavelet domain principal feature analysis for spindle health diagnosis
Ruqiang Yan et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2011)
Extending the inverse receptance coupling method for prediction of tool-holder joint dynamics in milling
Mohammad Mahdi Rezaei et al.
Journal of Manufacturing Processes (2011)
Correlation between feed velocity and preloading in ball screw drives
A. Verl et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Modelling of angular contact ball bearings and axial displacements for high-speed spindles
J. Jedrzejewski et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Machine tool spindle units
E. Abele et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Thermo-mechanical model of spindles
T. Holkup et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Precision machine tool X-Y stage utilizing a planar air bearing arrangement
K. Erkorkmaz et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Investigation of variable optimum preload for a machine tool spindle
Shuyun Jiang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
A holistic integrated dynamic design and modelling approach applied to the development of ultraprecision micro-milling machines
Dehong Huo et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Tool point dynamics prediction by a three-component model utilizing distributed joint interfaces
Hamid Ahmadian et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Effect of preload of linear guides on dynamic characteristics of a vertical column-spindle system
Ching Yuan Lin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Kinematic couplings: A review of design principles and applications
Alexander Slocum
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
A modeling approach for analysis and improvement of spindle-drawbar-bearing assembly dynamics
Shuyun Jiang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Synthesized Synchronous Sampling Technique for Differential Bearing Damage Detection
Huageng Luo et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2010)
Dynamic Design of a High-Speed Motorized Spindle-Bearing System
Shuyun Jiang et al.
JOURNAL OF MECHANICAL DESIGN (2010)
A Contact Stiffness Model of Machined Plane Joint Based on Fractal Theory
Shuyun Jiang et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2010)
A miniature milling spindle with Active Magnetic Bearings
M. H. Kimman et al.
MECHATRONICS (2010)
Development of a novel laser-based measuring system for the thread profile of ballscrew
Hsueh-Liang Huang et al.
OPTICS AND LASERS IN ENGINEERING (2010)
An analytical model of thermal contact resistance based on the Weierstrass-Mandelbrot fractal function
S. Jiang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2010)
An extended procedure for convective boundary conditions on transient thermal simulations of machine tools
Reimund Neugebauer et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2010)
Sensorless automated condition monitoring for the control of the predictive maintenance of machine tools
A. Verl et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Investigation of accuracy of aerostatic guideways
T. Onat Ekinci et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
A closed-form approach for identification of dynamical contact parameters in spindle-holder-tool assemblies
O. Ozsahin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Stiffness Computation and Identification of Parallel Kinematic Machine Tools
Thomas Bonnemains et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Hybrid Modeling of Ball Screw Drives With Coupled Axial, Torsional, and Lateral Dynamics
Chinedum E. Okwudire et al.
JOURNAL OF MECHANICAL DESIGN (2009)
A Review of Rolling Contact Fatigue
Farshid Sadeghi et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2009)
Study of frequency-shifted and re-scaling stochastic resonance and its application to fault diagnosis
Jiyong Tan et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2009)
Geometric error measurement and compensation of machines-An update
H. Schwenke et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
A self-sensing technology of active magnetic bearings using a phase modulation algorithm based on a high frequency voltage injection method
Young Ho Park et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2008)
The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres
A. Lamikiz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Joint identification of modular tools using a novel receptance coupling method
S. S. Park et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Modelling machine tool dynamics using a distributed parameter tool-holder joint interface
Kelvan Ahmadi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Shrink fit tool holder connection stiffness/damping modeling for frequency response prediction in milling
Tony L. Schmitz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Modeling and identification of tool holder-spindle interface dynamics
Mehdi Namazi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Selection of design and operational parameters in spindle-holder-tool assemblies for maximum chatter stability by using a new analytical model
A. Erturk et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Modeling and performance evaluation of machining spindle with active magnetic bearings
Jerzy T. Sawicki et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2007)
A three-probe system for measuring the parallelism and straightness of a pair of rails for ultra-precision guideways
Jooho Hwang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Tribological, thermal and mechanical coupling aspects of the dry sliding contact
D. Majcherczak et al.
TRIBOLOGY INTERNATIONAL (2007)
A new method for simulation of machining performance by integrating finite element and multi-body simulation for machine tools
M. Zaeh et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
An improved thermal model for machine tool bearings
Min Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF
A. Erturk et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Centrifugal force induced dynamics of a motorized high-speed spindle
Jenq-Shyong Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Dynamic model of ball bearings with internal clearance and waviness
Bai Changqing et al.
JOURNAL OF SOUND AND VIBRATION (2006)
Analysis and compensation of positional and deformation errors using integrated fixturing analysis in flexible machining parts
H. T. Sanchez et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Condition monitoring studies on spindle bearing of a lathe
S Saravanan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Prediction of spindle dynamics in milling by sub-structure coupling
MR Movahhedy et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
A new proposal for explicit angle calculation in angular contact ball bearing
JF Antoine et al.
JOURNAL OF MECHANICAL DESIGN (2006)
Damage monitoring of ball bearing
T. Hoshi
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
A modeling approach for analysis and improvement of spindle-holder-tool assembly dynamics
E. Budak et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Prediction of workpiece deformation in a fixture system using the finite element method
SP Siebenaler et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Three-component receptance coupling substructure analysis for tool point dynamics prediction
TL Schmitz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2005)
The mechanism of rolling contact fatigue: an update
AV Olver
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2005)
Bearing load analysis and control of a motorized high speed spindle
JS Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Four decades of research on thermal contact, gap, and joint resistance in microelectronics
MM Yovanovich
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2005)
Improving waviness in ultra precision turning by optimizing the dynamic behavior of a spindle with magnetic bearings
H Khanfir et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Improvement of machining accuracy of 5-axis control ultraprecision machining by means of laminarization and mirror surface finishing
T Kawai et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2005)
Study on the compensation of error by stick-slip for high-precision table
XS Mei et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Analysis of bearing configuration effects on high speed spindles using an integrated dynamic thermo-mechanical spindle model
HQ Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Integrated dynamic thermo-mechanical modeling of high speed spindles, part 1: Model development
HQ Li et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2004)
Structural modeling of end mills for form error and stability analysis
EB Kivanc et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Design of quasi-kinematic couplings
ML Culpepper
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2004)
A general method for the modeling of spindle-bearing systems
YZ Cao et al.
JOURNAL OF MECHANICAL DESIGN (2004)
Finite element modelling of ball screw feed drive systems
MF Zaeh et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Finite element modelling of ball screw feed drive systems
MF Zaeh et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Effect of thermal deformation on machine tool slide guide motion
SK Lee et al.
TRIBOLOGY INTERNATIONAL (2003)
Modeling the HSK toolholder-spindle interface
IM Hanna et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)
Measurement of the ballscrew contact angle by using the photoelastic effect and image processing
TY Chen et al.
OPTICS AND LASERS IN ENGINEERING (2002)
Influence of recess shape on the performance of a capillary compensated circular thrust pad hydrostatic bearing
SC Sharma et al.
TRIBOLOGY INTERNATIONAL (2002)
Dynamic analysis of geared rotor-bearing systems by the transfer matrix method
ST Choi et al.
JOURNAL OF MECHANICAL DESIGN (2001)
Tool point frequency response prediction for high-speed machining by RCSA
TL Schmitz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2001)
A power flow model for high speed motorized spindles - Heat generation characterization
B Bossmanns et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2001)
A new method for the analysis of deformation and load in a ball bearing with variable contact angle
NT Liao et al.
JOURNAL OF MECHANICAL DESIGN (2001)
Prediction of thermo-elastic behavior in a spindle-bearing system considering bearing surroundings
SM Kim et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Optimal design techniques for kinematic couplings
LC Hale et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2001)
Performances of HSK tool interfaces under high rotational speed
T Aoyama et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
Attenuation of vibrations due to unbalance of an active magnetic bearings milling electro-spindle
V Tamisier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
Improving high-speed machining material removal rates by rapid dynamic analysis
TL Schmitz et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
Analysis and improvement of motion accuracy of hydrostatic feed table
E Shamoto et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
Bearing induced vibration in precision high speed routing spindles
N Lynagh et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)
Calculation of the stiffness matrix of angular contact ball bearings by using the analytical approach
X Hernot et al.
JOURNAL OF MECHANICAL DESIGN (2000)
ARX modelling and compensation of roundness errors in taper turning
EHK Fung et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2000)
分享论文
