4.7 Review

Effective separation and recovery of valuable metals from waste Ni-based batteries: A comprehensive review

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Microstructure evolution and growth mechanism of Si-MoSi2 composite coatings on TZM (Mo-0.5Ti-0.1Zr-0.02 C) alloy

Yingyi Zhang et al.

Summary: Si-MoSi2 composite coatings with high silicon concentration were prepared on TZM alloy through a hot dip siliconizing method. The coatings have dense and uniform microstructure with submicron roughness. Different stages of growth process of silicide ceramic coating were observed.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Materials Science, Coatings & Films

Microstructure and oxidation resistance of Si-MoSi2 ceramic coating on TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy at 1500°C

Yingyi Zhang et al.

Summary: Si-MoSi2 ceramic coatings with excellent oxidation resistance were prepared using a hot dip silicon-plating process. The coatings exhibited a dense surface morphology with low roughness and a layered structure consisting of silicon-rich MoSi2 layer, pure MoSi2 layer, and a diffusion layer between MoSi2 layer and TZM substrate.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Effect of the Al, Cr and B elements on the mechanical properties and oxidation resistance of Nb-Si based alloys: a review

Fuqiang Shen et al.

Summary: This study summarizes the effects of Al, Cr, B elements addition on the mechanical properties and oxidation resistance of niobium-silicon ternary alloys, analyzes and compares the microstructure, oxidation behavior and mechanical properties of various alloys, and summarizes the fracture and oxidation failure mechanisms of the alloys. Additionally, it provides a prospect for the future development trend of ternary Nb-Si based oxidation-resistant alloys.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)

Review Chemistry, Physical

A review on progress of lithium-rich manganese-based cathodes for lithium ion batteries

Xueqian Ji et al.

Summary: This review systematically summarizes the lithium storage mechanism of layered lithium-rich manganese-based materials, addressing the challenges of voltage and capacity decay. Various modifications in recent years, including component improvement, coating, doping, and surface treatment, are also discussed. Future research directions and challenges for the development of high performance Li-rich Mn-based materials are presented.

JOURNAL OF POWER SOURCES (2021)

Article Materials Science, Multidisciplinary

Effects of Cr2O3 Content on Microstructure and Mechanical Properties of Al2O3 Matrix Composites

Kunkun Cui et al.

Summary: Al2O3-Cr2O3 refractories are solid solutions that can resist slag erosion effectively. The introduction of Cr2O3 in the composite material leads to decreased compactness and mechanical properties, as well as reduced thermal shock resistance. A Cr2O3 content of 20-30% in the composite refractory can meet the requirements for smelting reduction iron making kiln lining.

COATINGS (2021)

Review Green & Sustainable Science & Technology

Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust - A review

Jie Wang et al.

Summary: Electric arc furnace dust (EAFD) is a kind of metallurgical solid waste with huge production, and how to efficiently recover valuable metals from it has become the aim of various treatment processes. This paper discusses the physical and chemical properties of EAFD, as well as various treatment processes and the properties of the metals obtained from them. It provides theoretical guidance and practical reference for the treatment and utilization of EAFD.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Geochemistry & Geophysics

Quantitative mineralogical evaluation of Ni-Co laterite ores through XRPD-QPA- and automated SEM-based approaches: The Wingellina (Western Australia) case study

L. Santoro et al.

Summary: This study evaluated the mineral and chemical composition of oxide- and clay-dominated mineralized facies in the Wingellina deposit using XRPD-QPA and automated SEM, revealing that automated SEM provided the benefit of directly detecting and identifying Ni-Co-bearing Mn-oxy-hydroxides and Ni-bearing clays, which were difficult to distinguish using XRPD-QPA due to their poorly-crystalline structure. Additionally, automated SEM analysis of Mn-oxy-hydroxide-dominated samples enabled determination of Co deportment, crucial for predicting optimum metals recoveries, with a limitation being the fine-grained nature of the ore samples leading to the detection of mixed mineral classes not corresponding to mineral phases.

JOURNAL OF GEOCHEMICAL EXPLORATION (2021)

Review Chemistry, Physical

On the sustainability of lithium ion battery industry-A review and perspective

Yue Yang et al.

Summary: This paper examines technologies and research efforts in battery recycling from the perspective of economic viability and life cycle inventory. It highlights the challenges facing battery recycling and the role of battery design and circular economy in the sustainable development of battery industry.

ENERGY STORAGE MATERIALS (2021)

Article Engineering, Environmental

Dual cationic modified high Ni-low co layered oxide cathode with a heteroepitaxial interface for high energy-density lithium-ion batteries

Sidra Jamil et al.

Summary: The study demonstrates that dual cation doping with Zirconium and Gallium significantly enhances the electrochemical performance of high Ni-low Co cathodes, leading to better cyclability and capacity retention for NCMZG compared to traditional NCM.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Green & Sustainable Science & Technology

Influence of different processing methods on the recycling potential of agro-waste ashes for sustainable cement production: A review

R. Rithuparna et al.

Summary: The review focuses on the impact of different processing methods on the pozzolanic performance of agro-waste ashes. Grinding can increase the pozzolanic activity index to above 75% and lead to a 10-50% enhancement in compressive strength. Thermal processing improves pozzolanic performance by reducing loss on ignition, with the optimum burning temperature ranging from 500 to 700 degrees C. Chemical treatment increases specific surface area and decreases loss on ignition, enhancing the strength and durability of blended cementitious systems. Synergistic use of processing methods is more efficient than individual methods, and optimal conditions for processing vary among different agro-wastes.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Selective recovery of rare earth elements (REEs) from spent NiMH batteries by two-stage acid leaching

Jenni Lie et al.

Summary: The study investigated selective recovery of rare earth elements (REEs) from spent nickel metal hydride (NiMH) batteries using a two-stage acid leaching process followed by precipitation at acidic pH. The process involved conventional leaching followed by subcritical water extraction (SWE) using sulfuric acid, achieving 100% leaching efficiency of REEs, Ni, Co, and Mn. Selective precipitation of REEs was then achieved at low pH, resulting in successful recovery of La, Ce, and Nd. This study provides an alternative method for selectively recovering REEs from e-waste.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Chemical

Separation of valuable elements from NiMH battery leach liquor via antisolvent precipitation

Kivanc Korkmaz et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Article Chemistry, Analytical

Effects of dissolved gases on partial anodic passivation phenomena at copper microelectrodes immersed in aqueous NaCl

Amelia R. Langley et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Article Chemistry, Physical

Reverse flotation process for the recovery of pyrolytic LiFePO4

Chunxiao Zhao et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Article Materials Science, Multidisciplinary

Diatom-frustule catalyst supported multiwalled carbon nanotubes: Scalable and cost-effective synthesis and stable anode for lithium-ion battery

Meenakshi Seshadhri Garapati et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Article Engineering, Environmental

Crushing of large Li-ion battery cells

Lutz Wuschke et al.

WASTE MANAGEMENT (2019)

Article Engineering, Environmental

Pyrolysis and physical separation for the recovery of spent LiFePO4 batteries

Xuehu Zhong et al.

WASTE MANAGEMENT (2019)

Review Multidisciplinary Sciences

Recycling lithium-ion batteries from electric vehicles

Gavin Harper et al.

NATURE (2019)

Article Green & Sustainable Science & Technology

Selective recovery of valuable metals from spent lithium-ion batteries - Process development and kinetics evaluation

Wenfang Gao et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Green & Sustainable Science & Technology

Recycling of Zn-C and Ni-Cd spent batteries using Cyphos IL 104 via hydrometallurgical route

Harshit Mahandra et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Engineering, Environmental

Lanthanide-alkali double sulfate precipitation from strong sulfuric acid NiMH battery waste leachate

Antti Porvali et al.

WASTE MANAGEMENT (2018)

Article Engineering, Environmental

Hydrometallurgical recovery of metals: Ce, La, Co, Fe, Mn, Ni and Zn from the stream of used Ni-MH cells

Agnieszka Sobianowska-Turek

WASTE MANAGEMENT (2018)

Article Chemistry, Multidisciplinary

Biological Leaching and Chemical Precipitation Methods for Recovery of Co and Li from Spent Lithium-Ion Batteries

Basanta Kumar Biswal et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Engineering, Environmental

Recycling of Ni-Cd batteries by selective isolation and hydrothermal synthesis of porous NiO nanocuboid

Mohammad Assefi et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

Article Materials Science, Multidisciplinary

Isothermal reduction kinetics of Panzhihua ilmenite concentrate under 30vol% CO-70vol% N2 atmosphere

Ying-yi Zhang et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2017)

Article Green & Sustainable Science & Technology

Two stage leaching process for selective metal extraction from spent nickel metal hydride batteries

Pratima Meshram et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Chemistry, Multidisciplinary

Sustainable Recovery of Cathode Materials from Spent Lithium-Ion Batteries Using Lactic Acid Leaching System

Li Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Article Environmental Sciences

Maleic acid assisted improvement of metal chelation and antioxidant metabolism confers chromium tolerance in Brassica juncea L.

Jubayer Al Mahmud et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2017)

Article Metallurgy & Metallurgical Engineering

Leaching kinetics of spent nickel-cadmium battery in sulphuric acid

Navneet Singh Randhawa et al.

HYDROMETALLURGY (2016)

Review Metallurgy & Metallurgical Engineering

Metallurgical processes for the recovery and recycling of lanthanum from various resources-A review

Shivendra Sinha et al.

HYDROMETALLURGY (2016)

Article Metallurgy & Metallurgical Engineering

Synthesis and performance of spherical LiNixCoyMn1-x-yO2 regenerated from nickel and cobalt scraps

Yue Yang et al.

HYDROMETALLURGY (2016)

Article Materials Science, Multidisciplinary

Recovery of iron and calcium aluminate slag from high-ferrous bauxite by high-temperature reduction and smelting process

Ying-yi Zhang et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2016)

Article Green & Sustainable Science & Technology

Bioleaching of valuable metals Li, Co, Ni and Mn from spent electric vehicle Li-ion batteries for the purpose of recovery

Yayun Xin et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Environmental Sciences

Recovery of metals from a mixture of various spent batteries by a hydrometallurgical process

Kulchaya Tanong et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2016)

Article Engineering, Environmental

Recycling supercapacitors based on shredding and mild thermal treatment

Guozhan Jiang et al.

WASTE MANAGEMENT (2016)

Article Metallurgy & Metallurgical Engineering

Hydrometallurgical process for rare earth elements recovery from spent Ni-HM batteries

A. R. Alonso et al.

CANADIAN METALLURGICAL QUARTERLY (2015)

Article Metallurgy & Metallurgical Engineering

Leaching of base metals from spent Ni-metal hydride batteries with emphasis on kinetics and characterization

Pratima Meshram et al.

HYDROMETALLURGY (2015)

Article Engineering, Chemical

Extracting Copper by Lactic Acid from Copper Oxide Ore and Dissolution Kinetics

Jiushuai Deng et al.

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2015)

Article Engineering, Environmental

Novel approach to recover cobalt and lithium from spent lithium-ion battery using oxalic acid

Xianlai Zeng et al.

JOURNAL OF HAZARDOUS MATERIALS (2015)

Article Materials Science, Multidisciplinary

Pyrometallurgical Extraction of Valuable Elements in Ni-Metal Hydride Battery Electrode Materials

Yin-Ju Jiang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)

Article Engineering, Environmental

Recovery of cathode materials and Al from spent lithium-ion batteries by cleaning

Li-Po He et al.

WASTE MANAGEMENT (2015)

Review Green & Sustainable Science & Technology

Current Developments and Challenges in the Recycling of Key Components of (Hybrid) Electric Vehicles

Tobias Elwert et al.

RECYCLING (2015)

Review Environmental Sciences

Recycling of Spent Lithium-Ion Battery: A Critical Review

Xianlai Zeng et al.

CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2014)

Article Chemistry, Multidisciplinary

Selective extraction of metals using ionic liquids for nickel metal hydride battery recycling

Kristian Larsson et al.

GREEN CHEMISTRY (2014)

Article Engineering, Environmental

Rare earth element recycling from waste nickel-metal hydride batteries

Xiuli Yang et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

Article Electrochemistry

Recovery of Lithium Cobalt Oxide Material from the Cathode of Spent Lithium-Ion Batteries

Zheming Zhang et al.

ECS ELECTROCHEMISTRY LETTERS (2014)

Article Engineering, Chemical

Separation and recovery of rare earth elements from spent nickel-metal-hydride batteries using synthetic adsorbent

M. S. Gasser et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2013)

Review Environmental Sciences

An overview on the processes and technologies for recycling cathodic active materials from spent lithium-ion batteries

Xihua Zhang et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2013)

Article Engineering, Environmental

Dissolution and characterization of HEV NiMH batteries

Kristian Larsson et al.

WASTE MANAGEMENT (2013)

Article Engineering, Chemical

Recovery of Nickel and Cobalt from Spent NiMH Batteries by Electrowinning

Daniel A. Bertuol et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2012)

Article Engineering, Environmental

A copper-catalyzed bioleaching process for enhancement of cobalt dissolution from spent lithium-ion batteries

Guisheng Zeng et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Review Chemistry, Physical

Thermal runaway caused fire and explosion of lithium ion battery

Qingsong Wang et al.

JOURNAL OF POWER SOURCES (2012)

Article Chemistry, Multidisciplinary

Oxygen Evolution in Overcharged LixNi1/3Co1/3Mn1/3O2 Electrode and Its Thermal Analysis Kinetics

Wang Haiyan et al.

CHINESE JOURNAL OF CHEMISTRY (2011)

Article Engineering, Environmental

A review of hazards associated with primary lithium and lithium-ion batteries

Diego Lisbona et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2011)

Article Engineering, Chemical

SEPARATION OF CADMIUM(II) FROM SPENT NICKEL/CADMIUM BATTERY BY EMULSION LIQUID MEMBRANE

Zhang Yanlin et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2010)

Article Engineering, Environmental

A Novel Process for Recovering Valuable Metals from Waste Nickel-Cadmium Batteries

Kui Huang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2009)

Article Metallurgy & Metallurgical Engineering

Recovery of Ni, Co and rare earths from spent Ni-metal hydride batteries and preparation of spherical Ni(OH)2

Linyan Li et al.

HYDROMETALLURGY (2009)

Article Chemistry, Physical

Spent NiMH batteries-The role of selective precipitation in the recovery of valuable metals

Daniel Assumpcao Bertuol et al.

JOURNAL OF POWER SOURCES (2009)

Article Metallurgy & Metallurgical Engineering

Recovery of valuable metals from anode material of hydrogen-nickel battery

Wu Fang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)

Article Engineering, Environmental

Waste battery treatment options: Comparing their environmental performance

K. Briffaerts et al.

WASTE MANAGEMENT (2009)

Review Chemistry, Physical

A review of processes and technologies for the recycling of lithium-ion secondary batteries

Jinqiu Xu et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Physical

Progress in high-power nickel-metal hydride batteries

Peter Baeuerlein et al.

JOURNAL OF POWER SOURCES (2008)

Article Engineering, Environmental

Bioleaching of metals from spent lithium ion secondary batteries using Acidithiobacillus ferrooxidans

Debaraj Mishra et al.

WASTE MANAGEMENT (2008)

Article Engineering, Environmental

Recovery of nickel, cobalt and some salts from spent Ni-MH batteries

M. A. Rabah et al.

WASTE MANAGEMENT (2008)

Article Engineering, Environmental

Chemical and physical characterization of electrode materials of spent sealed Ni-Cd batteries

C. A. Nogueira et al.

WASTE MANAGEMENT (2007)

Article Chemistry, Physical

Spent NiMH batteries:: Characterization and metal recovery through mechanical processing

Daniel Assumpcao Bertuol et al.

JOURNAL OF POWER SOURCES (2006)

Article Chemistry, Physical

Development of a recycling process for nickel-metal hydride batteries

Tobias Mueller et al.

JOURNAL OF POWER SOURCES (2006)

Article Materials Science, Multidisciplinary

Synthesis by citric acid sol-gel method and electrochemical properties of Li4Ti5O12 anode material for lithium-ion battery

YJ Hao et al.

MATERIALS CHEMISTRY AND PHYSICS (2005)

Article Chemistry, Physical

An overview on the current processes for the recycling of batteries

DCR Espinosa et al.

JOURNAL OF POWER SOURCES (2004)

Article Biotechnology & Applied Microbiology

Recycling of nickel-metal hydride batteries. I: Dissolution and solvent extraction of metals

N Tzanetakis et al.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2004)

Article Metallurgy & Metallurgical Engineering

Rare earths recovery from NiMH spent batteries

L Pietrelli et al.

HYDROMETALLURGY (2002)

Article Metallurgy & Metallurgical Engineering

Equilibrium analysis of the reactive liquid-liquid test system ZnSO4/D2EHPA/n-heptane

MB Mansur et al.

HYDROMETALLURGY (2002)

Article Engineering, Environmental

Ni-MH spent batteries: a raw material to produce Ni-Co alloys

C Lupi et al.

WASTE MANAGEMENT (2002)

Review Engineering, Environmental

Innovations in separations technology for the recycling and re-use of liquid waste streams

SE Kentish et al.

CHEMICAL ENGINEERING JOURNAL (2001)