☆ 4.7 Article

Microstructure and mechanical properties of α/β-Si3N4 composite ceramics with novel ternary additives prepared via spark plasma sintering

CERAMICS INTERNATIONAL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Fabrication and properties of pressure-sintered reaction-bonded Si3N4 ceramics with addition of Eu2O3-MgO-Y2O3

Li-Xiang Wu et al.

Summary: PSRBSN ceramics were successfully prepared using a hot-press sintering method, with added Eu2O3-MgO-Y2O3 promoting full nitridation of Si powder, resulting in improved ceramic properties. The addition of 5 wt% Eu2O3 led to higher relative density, hardness, strength, and thermal conductivity compared to non-doped samples.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Improved thermal conductivity of β-Si3N4 ceramics through the modification of the liquid phase by using GdH2 as a sintering additive

Weide Wang et al.

Summary: The addition of GdH2 increases the N/O ratio in the liquid phase, enhancing thermal conductivity while reducing flexural strength at high temperatures. This is mainly due to the exaggerated bimodal microstructure resulting from the substitution of Gd2O3 by GdH2.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Self-reinforced and high-thermal conductivity silicon nitride by tailoring ?-? phase ratio with pressureless multi-step sintering

Jung Hoon Kong et al.

Summary: A self-reinforced Si3N4 ceramic with high thermal conductivity was prepared through multi-step pressureless sintering with Y2O3 and MgO additives, achieving improved flexural strength and thermal conductivity by utilizing a partial α-β phase transformation to establish a bimodal microstructure. The rate constant and activation energy of the sintering process were calculated to assess the potential of obtaining the proper quantity of α-Si3N4 seeds through the phase transformation.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Thermal conductivity and mechanical properties of Si3N4 ceramics with binary fluoride sintering additives

Shengjun Liao et al.

Summary: In this study, silicon nitride ceramics were fabricated using different sintering additives, with samples doped with binary fluorides showing superior thermal conductivity and mechanical properties. The addition of YF3 reduced the grain growth exponent and activation energy, leading to improved properties in the Si3N4 ceramics.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Improved toughness of spark-plasma-sintered Si3N4 ceramics by adding HfB2

Si-Chun Luo et al.

Summary: In this study, high toughness and high hardness Si3N4 ceramics with fine and bimodal microstructure were successfully prepared by adding HfB2 and using spark plasma sintering (SPS). The introduction of HfB2 promoted phase transformation, significantly improving the toughness while slightly decreasing the hardness of Si3N4 ceramics.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of spark plasma sintered TiC-Si3N4 ceramics

Yaghoub Pazhouhanfar et al.

Summary: This research compared the sintering behavior and physical-mechanical characteristics of TiC and TiC-Si3N4 ceramics, revealing the deposition of carbon in monolithic TiC and the in-situ formation of SiC and N-2 phases when Si3N4 was incorporated. Despite the thermodynamic assessment suggesting the in-situ synthesis of TiN, no evidence of it was found in the experiment. The TiC-Si3N4 ceramic showed thermal conductivity of 10.1 W/mK, Vickers hardness of 2966 HV0.1kg, and flexural strength of 219 MPa.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effect of composite sintering additives containing non-oxide on mechanical, thermal and dielectric properties of silicon nitride ceramics substrate

Feng Hu et al.

Summary: Silicon nitride ceramics were prepared by gas-pressure sintering with magnesium silicon nitride and Y2O3 as sintering additives. The study found that the amount and proportion of MgSiN2 and Y2O3 significantly influenced the properties and microstructure of Si3N4 ceramics, impacting thermal conductivity, mechanical, and dielectric properties. This demonstrated the importance of composite sintering additives containing non-oxides on the combination properties of Si3N4 ceramic substrates.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Structure and Properties of ZrON Coatings Synthesized by Cathodic Arc Evaporation

Alexander S. Kuprin et al.

Summary: The research investigated the influence of oxygen concentration on the adhesion, color, structure, and mechanical properties of transition metal oxynitride ZrON coatings. The results revealed changes in color, crystallite size, and hardness with increasing oxygen concentration, while adhesion showed a strong dependence on the oxygen concentration.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Elimination of grain boundaries and its effect on the properties of silicon nitride ceramics

Feng Hu et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical properties and thermal conductivity of dense β-SiAlON ceramics fabricated by two-stage spark plasma sintering with Al2O3-AlN-Y2O3 additives

Y. L. Lan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effects of Ti(C, N) addition on the microstructure and mechanical properties of spark plasma sintered Si3N4/Ti(C, N) ceramic tool material

Ning Sun et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of high thermal conductivity silicon nitride ceramics by pressureless sintering with MgO and Y2O3 as sintering additives

Tao Lu et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Performance improvement of Si3N4 ceramic cutting tools by tailoring of phase composition and microstructure

Da-Wang Tan et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effect of the binary nonoxide additives on the densification behavior and thermal conductivity of Si3N4ceramics

Weide Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effect of in-situ formed Y2O3 by metal hydride reduction reaction on thermal conductivity of β-Si3N4 ceramics

Weide Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

High thermal conductivity silicon nitride ceramics prepared by pressureless sintering with ternary sintering additives

Yusen Duan et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of nano-sized sintering additives on microstructure and mechanical properties of Si3N4 ceramics

Anil Kumar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Ceramics

Phase stability, hardness and oxidation behaviour of spark plasma sintered ZrB2-SiC-Si3N4 composites

Sravan Kumar Thimmappa et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Continuous and symmetric graded Si3N4 ceramics designed by spark plasma sintering at 15 MPa

Jun-Jie Yu et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase evolution during spark plasma sintering of novel Si3N4-doped TiB2-SiC composite

Mohammad Dashti Germi et al.

MATERIALS CHARACTERIZATION (2018)

添加到收藏夹

Article Materials Science, Ceramics

High-temperature phase relations of ZrN-ZrO2-Y2O3 ternary system

Youjun Lu et al.

JOURNAL OF ADVANCED CERAMICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sintering and kinetic mechanism of Si3N4-SiC micro-nano composite by spark plasma sintering

Mohammad Khajelakzay et al.

FUNCTIONAL MATERIALS LETTERS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Si3N4-ZrB2 ceramics prepared at low temperature with improved mechanical properties

Li-Xiang Wu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of sintering additive composition on microstructure and mechanical properties of silicon nitride

Wenbo Han et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Ceramics

Effects of microstructure and intergranular glassy phases on thermal conductivity of silicon nitride

Jin-Myung Kim et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Materials Science, Ceramics

Effect of the Y2O3 additive concentration on the properties of a silicon nitride ceramic substrate

Wei Liu et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Ceramics

Mechanical properties and thermal conductivity of Si3N4 ceramics with YF3 and MgO as sintering additives

Hanqin Liang et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Ceramics

Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si3N4 ceramics

Hyun Min Lee et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Cu particles on phase transformation of spark plasma sintered silicon nitride

Yongxia Li et al.

MATERIALS LETTERS (2016)

添加到收藏夹

Article Materials Science, Ceramics

Polymorphism of M3AlX Phases (M=Ti, Zr, Hf; X=C, N) and Thermomechanical Properties of Ti3AlN Polymorphs

Yanhui Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Physics, Condensed Matter

Crystal structure, electronic and elastic properties for novel Hf3AlN and Zr3AlN ceramics explored by first principles studies

Wenxia Feng et al.

PHYSICA B-CONDENSED MATTER (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Spark plasma sintered high hardness α/β Si3N4 composites with MgSiN2 as additives

Peng Gui-hua et al.

SCRIPTA MATERIALIA (2009)

添加到收藏夹

Proceedings Paper Materials Science, Ceramics

Spark Plasma Sintering of Silicon Nitride-Boron Carbide Composites

E. Ayas et al.

SIAIONS AND NON-OXIDES (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Densification, microstructure, and fracture behavior of TiC/Si3N4 composites by spark plasma sintering

Bai Ling et al.

RARE METALS (2008)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of hard and strong α/β-Si3N4 composites with MgSiN2 as addivitives

Gui-hua Peng et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.