相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Synergistic optimization in solidification microstructure and mechanical performance of novel (TiCxNy- TiB2)p/Al nanocomposites: Design, tuning and mechanism
Bai-Xin Dong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)
Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding
Hongmei Zhu et al.
CERAMICS INTERNATIONAL (2021)
Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al-Cu nanocomposites
Yu-Yang Gao et al.
CERAMICS INTERNATIONAL (2021)
Unprecedented enhancement in strength-plasticity synergy of (TiC+Al6MoTi+Mo)/Al cermet by multiple length-scale microstructure stimulated synergistic deformation
Hong-Yu Yang et al.
COMPOSITES PART B-ENGINEERING (2021)
Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties
Hong-Yu Yang et al.
COMPOSITES PART B-ENGINEERING (2021)
Insight into solidification microstructure control by trace TiCN-TiB2 particles for yielding fine-tuned nanoprecipitates in a hypoeutectic Al-Si-Mg alloy
Qiang Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Role of laser scan strategies in defect control, microstructural evolution and mechanical properties of steel matrix composites prepared by laser additive manufacturing
Hong-yu Chen et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)
Interface characteristics between TiN and matrix and their effect on solidification structure
Tian-peng Qu et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021)
Effect of Ti/V ratio on thermodynamics and kinetics of MC in γ/α matrices of Ti-V microalloyed steels
Ke Zhang et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021)
Hardening of Ti(CN)?Fe composites by microstructural refinement and solid solution strengthening of metallic phase
Hanjung Kwon et al.
CERAMICS INTERNATIONAL (2021)
Sliding wear behaviour of Fe/316L/430-Ti(C,N) composites prepared via spark plasma sintering and subsequent heat treatment
Dao-ying Chen et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)
Mechanism for suspension magnetization roasting of iron ore using straw-type biomass reductant
Yue Cao et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)
Enhanced visible-light-assisted peroxymonosulfate activation over MnFe2O4 modified g-C3N4/diatomite composite for bisphenol A degradation
Xiangwei Zhang et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)
Grinding performance oriented experimental evaluation on TiC-Steel cermet with vitrified bond cBN wheel
Xin Chen et al.
CERAMICS INTERNATIONAL (2021)
Thermal shock behavior of co-continuous TiCx-Cu cermets in air and anaerobic environment
Cong Lei et al.
CERAMICS INTERNATIONAL (2021)
Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution
Bai-Xin Dong et al.
COMPOSITES PART B-ENGINEERING (2021)
Competitive precipitation behavior of hybrid reinforcements in copper matrix composites fabricated by powder metallurgy
Tao Lan et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)
Effect of vanadium content on microstructure and properties of in situ TiC reinforced VxFeCoNiCu multi-principal-element alloy matrix composites
Chun-lei Tu et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021)
Modification of eutectic structure and halo by addition of immiscible element in Fe-based dendrite-reinforced eutectic composites
Dae Hyun Cho et al.
MATERIALS LETTERS (2021)
Precipitation strengthening of nano-scale TiC in a duplex low-density steel under near-rapid solidification
Jian-lei Zhang et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021)
Experimental investigation on the mechanical, structural and thermal properties of Cu-ZrO2 nanocomposites hybridized by graphene nanoplatelets
M. S. Abd-Elwahed et al.
CERAMICS INTERNATIONAL (2020)
Preparation of V8C7-Fe/iron dual-scale composite via two-step in situ reaction
Haiqiang Bai et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Strengthening mechanism of TiC/Al composites using Al-Ti-C/CNTs with doping alloying elements (Mg, Zn and Cu)
Hongyu Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Prospects of utilization of waste dumped low-grade limestone for iron making: A case study
Shobhana Dey et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)
Towards a sustainable technology for production of extra-pure Ti metal: Electrolysis of sulfurized Ti(C,N) in molten CaCl2
Eltefat Ahmadi et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)
Crystallography of the Heterogeneous Nucleation of -Ferrite on Ce2O2S Particles During Solidification of an Fe-4Si Alloy
Y. P. Ji et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
In-situ Mo nanoparticles strengthened CoCrNi medium entropy alloy
Jianying Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of B4C nanoparticles on mechanical behaviour of Silicon brass nanocomposite through mechanical alloying and hot pressing
R. Clinktan et al.
CERAMICS INTERNATIONAL (2019)
The Synthesis, Structure, Morphology Characterizations and Evolution Mechanisms of Nanosized Titanium Carbides and Their Further Applications
Bai-Xin Dong et al.
NANOMATERIALS (2019)
Effects of TiC on the microstructure and formation of acicular ferrite in ferritic stainless steel
Yang Li et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)
Design of TiCx nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: Experiment and first-principle calculation
Bai-Xin Dong et al.
MATERIALS & DESIGN (2019)
Surface strengthening aluminum alloy by in-situ TiC-TiB2 composite coating
Fang Yang et al.
CERAMICS INTERNATIONAL (2019)
Effect of TiN addition on the microstructure and mechanical properties of TiB2-FeNi based cermets
Ning Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Mechanical properties and abrasive wear behaviors of in situ nano-TiCx/Al-Zn-Mg-Cu composites fabricated by combustion synthesis and hot press consolidation
Yu-Yang Gao et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
Al-Ti-C master alloy with nano-sized TiC particles dispersed in the matrix prepared by using carbon nanotubes as C source
Hongxiang Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Refinement effect of TiC on ferrite by molecular statics/dynamics simulations and first-principles calculations
Sha Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites
Yingbin Hu et al.
CERAMICS INTERNATIONAL (2018)
Synthesis and mechanical properties of TiC-Fe interpenetrating phase composites fabricated by infiltration process
Yong Zheng et al.
CERAMICS INTERNATIONAL (2018)
Improving the mechanical properties of tantalum carbide particle-reinforced iron-based composite by varying the TaC contents
Jianhong Peng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Interface optimization of CNT/Cu composite by forming TiC nanoprecipitation and low interface energy structure via spark plasma sintering
Bowen Cheng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Additive manufacturing of complex-shaped graded TiC/steel composites
Asaf Levy et al.
MATERIALS & DESIGN (2017)
The nano-sized TiC particle reinforced Al-Cu matrix composite with superior tensile ductility
Dongshuai Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Preparation of titanium carbide nanowires for application in electromagnetic wave absorption
Xiaoyan Yuan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Crystallographic study of Al3Zr and Al3Nb as grain refiners for Al alloys
Feng Wang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Effect of Cr Content on the Compression Properties and Abrasive Wear Behavior of the High-Volume Fraction (TiC-TiB2)/Cu Composites
Feng Qiu et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2014)
Influence of carbon source on the microstructure of Al-Ti-C master alloy and its grain refining efficiency
Tao Wang et al.
MATERIALS CHARACTERIZATION (2013)
Reaction mechanisms of the TiC/Fe composite fabricated by exothermic dispersion from Fe-Ti-C element system
Heguo Zhu et al.
POWDER TECHNOLOGY (2013)
Compressive and wear resistance of nanometric alumina reinforced copper matrix composites
A. Fathy et al.
MATERIALS & DESIGN (2012)
Mechanochemical synthesis of nano TiC powder by mechanical milling of titanium and graphite powders
Mohammad Bagher Rahaei et al.
POWDER TECHNOLOGY (2012)
Self-propagating high-temperature synthesis of nano-TiCx particles with different shapes by using carbon nano-tube as C source
Shenbao Jin et al.
NANOSCALE RESEARCH LETTERS (2011)
A new approach to designing a grain refiner for Mg casting alloys and its use in Mg-Y-based alloys
D. Qiu et al.
ACTA MATERIALIA (2009)
Lattice Parameter and Stoichiometry of TiCx Produced in Alloyed Ti-C Systems by Self-Propagating High-Temperature Synthesis
Ya-Feng Yang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Thermodynamic and lattice parameter calculation of TiCx produced from Al-Ti-C powders by laser igniting self-propagating high-temperature synthesis
Y. X. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Phonon related properties of transition metals, their carbides, and nitrides: A first-principles study
E. I. Isaev et al.
JOURNAL OF APPLIED PHYSICS (2007)
Fabrication, microstructure and properties of Fe-TiC ceramic-metal composites
IWM Brown et al.
CURRENT APPLIED PHYSICS (2004)
Preparation of Al-TiC composites by self-propagating high-temperature synthesis
PJ Li et al.
SCRIPTA MATERIALIA (2003)
Effect of matrix composition on the microstructure of in situ synthesized TiC particulate reinforced iron-based composites
Z Mei et al.
MATERIALS LETTERS (2003)
First-principles calculations of vacancy effects on structural and electronic properties of TiCx and TiNx
Z Dridi et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2002)
Self-propagating high-temperature synthesis and liquid-phase sintering of TiC/Fe composites
P Persson et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Wetting of TiC by non-reactive liquid metals
N Frage et al.
ACTA MATERIALIA (2002)
Reaction tn Al-Ti-C powders and its relation to the formation and stability of TiC in Al at high temperatures
AR Kennedy et al.
SCRIPTA MATERIALIA (2000)