4.7 Article

Lanthanum ion modification of aminated cyclomatrix polyphosphazene-coated porous carbon nanosheets for rapid, efficient and selective removal of phosphate

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Environmental Sciences

Three-dimensional graphene/La(OH)3-nanorod aerogel adsorbent by self-assembly process for enhanced removal and recovery of phosphate in wastewater

Pu Wang et al.

Summary: This study presents a novel three-dimensional graphene/La(OH)(3)-nanorod aerogel (GLA) prepared by a unique self-assembly process for the removal and recovery of phosphorus from low concentration P-containing wastewater. The GLA shows excellent adsorption performance and recyclability, making it a promising method for P removal and recovery.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Chemistry, Applied

Fast and highly efficient adsorption of cationic dyes by phytic acid crosslinked β-cyclodextrin

Yao Li et al.

Summary: In this study, a novel adsorbent PA-ll-CD was prepared by the poly-condensation reaction of phytic acid and ll-cyclodextrin. The adsorbent exhibited high adsorption capacities for cationic dyes and showed fast adsorption kinetics. It also demonstrated selective adsorption and good regeneration efficiency. The results suggest that PA-ll-CD has great potential in the treatment of dye wastewater.

CARBOHYDRATE POLYMERS (2022)

Article Chemistry, Physical

Investigation of the efficient adsorption performance and adsorption mechanism of 3D composite structure La nanosphere-coated Mn/Fe layered double hydrotalcite on phosphate

Xianyong Hong et al.

Summary: Severe water eutrophication caused by excessive phosphorus release has become a global environmental issue. In this study, quercetin modified MnFe layered double hydrotalcite three-dimensional composites encapsulated by lanthanum nanoparticles were prepared and showed outstanding phosphorus adsorption performance. The adsorbent maintained high adsorption capacity over a wide range of pH. Theoretical studies revealed the active sites of the reactions.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Environmental Sciences

Phosphate removal by a La(OH)3 loaded magnetic MAPTAC-based cationic hydrogel: Enhanced surface charge density and Donnan membrane effect

Yanqing Zhou et al.

Summary: A new type of La(OH)(3)@MMCH adsorbent with high adsorption capacity and excellent removal performance has been developed, which is a promising material for controlling eutrophication and phosphate recovery in the environment.

JOURNAL OF ENVIRONMENTAL SCIENCES (2022)

Article Engineering, Environmental

A high-capacity nanocellulose aerogel uniformly immobilized with a high loading of nano-La(OH)3 for phosphate removal

Zhanghui Wang et al.

Summary: This study developed a high-capacity aerogel (L-Q aerogel) as a novel adsorbent for scavenging phosphate from water bodies. The aerogel exhibited high adsorption capacity and rate, and the utilization efficiency of nano-La(OH)(3) was greatly enhanced. The hybrid aerogel also possessed pH-dependent adsorption and showed stable performance in phosphate solutions.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Using iron ion-loaded aminated polyacrylonitrile fiber to efficiently remove wastewater phosphate

Wusong Xu et al.

Summary: The study successfully synthesized a recyclable iron-loaded aminated polyacrylonitrile fiber (PAN(A)F-Fe) for phosphate removal from wastewater with good adaptability and rapid chemical adsorption efficiency. The adsorbent exhibited excellent reusability in various ion solutions and effectively removed phosphate pollution in continuous flow processes.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Efficient macroporous adsorbent for phosphate removal based on hydrate aluminum-functionalized melamine sponge

Ruiting Liu et al.

Summary: The newly developed MF-HA sponge showed excellent adsorption performance across a wide pH range, with high uptake capacity and endothermic adsorption process. Additionally, the sponge could be easily separated from the solution and demonstrated good recyclability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Environmental Sciences

A novel lanthanum-modified copper tailings adsorbent for phosphate removal from water

Haiyang Jin et al.

Summary: The study showed that La(OH)(3)-modified copper tailings have better phosphate removal capacity, and the adsorption process follows the pseudo-second-order kinetic model and Langmuir isotherm model.

CHEMOSPHERE (2021)

Review Electrochemistry

A Review on the Morphologically Controlled Synthesis of Polyphosphazenes for Electrochemical Applications

Zahid Ali et al.

Summary: Polyphosphazenes (PPNs) are organic-inorganic hybrid polymeric skeletal materials fabricated via precipitation or condensation polymerization and self-assembly approaches. Auto-doping feature of PPN materials allows for the formation of binary-, ternary-, and quaternary-doped carbon frameworks and graphitic carbon nitride (g-C3N4), providing a good range of surface areas and active sites for applications in solid-state batteries and supercapacitors. Structural irregularities and imperfections in PPN materials offer opportunities for water splitting reactions with lower half-wave potential compared to conventional electrocatalysts.

CHEMELECTROCHEM (2021)

Article Chemistry, Multidisciplinary

Strong Chemical Interaction between Lithium Polysulfides and Flame-Retardant Polyphosphazene for Lithium-Sulfur Batteries with Enhanced Safety and Electrochemical Performance

Peng Chen et al.

Summary: The study introduces a flame-retardant polyphosphazene-modified holey graphene/carbonized cellulose paper as a multifunctional interlayer in Li-S batteries, which effectively traps LiPS, increases the diffusion coefficient for lithium ions, inhibits shuttling effect of LiPS, reduces flammability of the sulfur cathode and electrolyte, and enhances safety of Li-S batteries.

ADVANCED MATERIALS (2021)

Article Engineering, Environmental

Fe(III) loaded chitosan-biochar composite fibers for the removal of phosphate from water

Kumuduni Niroshika Palansooriya et al.

Summary: This study fabricated Fe(III) loaded chitosan-biochar composite fibers for adsorptive removal of phosphate from water, demonstrating their high adsorption capacities. The adsorption process followed different kinetic models, indicating the superior adsorption efficiency of the composite fibers.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Adsorption of phosphate onto lanthanum-doped coal fly ash-Blast furnace cement composite

Satoshi Asaoka et al.

Summary: A high-performance adsorbent for phosphate removal, La-FACC, was developed by impregnating lanthanum on a composite material. The adsorption kinetics were well fit by the intra-particle diffusion model and pseudo second-order kinetic model, indicating chemisorption as the main mechanism. The Langmuir isotherm described the adsorption behavior well, showing high capacity and selectivity for phosphate removal under a wide pH range and high ion strength.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Environmental Sciences

Phosphate recovery from aqueous solution through adsorption by magnesium modified multi-walled carbon nanotubes

Shoupei Jiang et al.

Summary: In this study, magnesium-modified multi-walled carbon nanotubes were used as a novel adsorbent for phosphate recovery from wastewater, displaying high efficiency and capacity for phosphate adsorption, with minimal negative impact from some co-existing ions. These results suggest great potential for the application of Mg@CNT in phosphate recovery.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Environmental Sciences

Enhanced adsorption activity for phosphate removal by functional lignin-derived carbon-based adsorbent: Optimization, performance and evaluation

Gao-Jie Jiao et al.

Summary: This study reports a MgO-functionalized lignin-based bio-charcoal as an efficient adsorbent for phosphate removal, showing excellent adsorption activity and regeneration ability. The MFLC exhibits extremely high adsorption activity and removal efficiency at low phosphate concentrations, and the loading content of MgO and particle size effectively enhance its phosphate adsorption activity.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Chemistry, Physical

Investigation of phosphate removal mechanisms by a lanthanum hydroxide adsorbent using p-XRD, FTIR and XPS

Lin Zhang et al.

Summary: Macroscopic batch experiments and microscopic spectroscopic characterization were employed to study the phosphate adsorption process onto lanthanum hydroxide adsorbent. The results showed that the relatively low La release after phosphate adsorption suggested the formation of surface co-precipitation of lanthanum phosphate. The maximum adsorption capacities and surface configurations of lanthanum hydroxide varied at different pH values during the adsorption of phosphate.

APPLIED SURFACE SCIENCE (2021)

Article Engineering, Environmental

Insight into simultaneous selective removal of nitrogen and phosphorus species by lanthanum-modified porous polymer: Performance, mechanism and application

Biming Liu et al.

Summary: The study successfully prepared HLO-modified resin (LMR) for simultaneous removal of nitrogen and phosphorus from eutrophic water. LMR demonstrated effective adsorption of N and P multicomponent pollutants and maintained good separation and removal performance within a wide pH range.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Applied

Construction of a novel lanthanum carbonate-grafted ZSM-5 zeolite for effective highly selective phosphate removal from wastewater

Yi Yang et al.

Summary: The novel LC-ZSM-5 adsorbent has high adsorption capacity and rate, effectively removing phosphate from wastewater with stability. The adsorption process is influenced by both phosphate concentration and interaction between adsorbent and adsorbate.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Article Chemistry, Multidisciplinary

On the Universality of Capillary Condensation and Adsorption Hysteresis Phenomena in Ordered and Crystalline Mesoporous Materials

Katie Cychosz Struckhoff et al.

ADVANCED MATERIALS INTERFACES (2020)

Article Chemistry, Physical

CO2 Hydrogenation to Formate Catalyzed by Ru Coordinated with a N,P-Containing Polymer

Bingfeng Chen et al.

ACS CATALYSIS (2020)

Article Engineering, Environmental

Biochar-loaded Ce3+-enriched ultra-fine ceria nanoparticles for phosphate adsorption

Yi Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Chemistry, Physical

Adsorption of nitrate and phosphate from aqueous solution using amine cross-linked tea wastes

Huanhuan Qiao et al.

APPLIED SURFACE SCIENCE (2019)

Article Engineering, Environmental

Effective and selective adsorption of phosphate from aqueous solution via trivalent-metals-based amino-MIL-101 MOFs

Ruiting Liu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Chemical

Electrocoagulation as a green technology for phosphate removal from river water

Khalid S. Hashim et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Article Green & Sustainable Science & Technology

Entropy generation analysis of sequential Anaerobic Digester Ion-Exchange technology for Phosphorus extraction from waste

Venkata Sai Gargeya Vunnava et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Review Engineering, Environmental

Adsorption as a technology to achieve ultra-low concentrations of phosphate: Research gaps and economic analysis

Prashanth Suresh Kumar et al.

WATER RESEARCH X (2019)

Article Engineering, Environmental

Selective removal of Hg(II) from aqueous solution by functionalized magnetic-macromolecular hybrid material

Khalid Z. Elwakeel et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Engineering, Environmental

Enhanced adsorption of phosphate from aqueous solution by nanostructured iron(III)-copper(II) binary oxides

Guoliang Li et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Article Chemistry, Multidisciplinary

Hyperbranched Cyclotriphosphazene Polymer-grafted Graphene with Amphipathicity

Chao Liu et al.

CHEMISTRY LETTERS (2014)

Article Chemistry, Physical

Adsorption of Cationic Dye (Methylene Blue) from Water Using Polyaniline Nanotubes Base

Mohamad M. Ayad et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)