☆ 4.7 Article

Para-halogenated triphenyltriazine induced surface passivation toward efficient and stable perovskite solar cells

APPLIED SURFACE SCIENCE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Multifunctional passivation agents for improving efficiency and stability of perovskite solar cells: Synergy of methyl and carbonyl groups

Se-Phin Cho et al.

Summary: This study explores the use of bi-functional and multi-functional passivation agents to enhance the performance of perovskite solar cells, showing that these compounds can improve the crystallinity and charge collection capabilities of perovskite films. By introducing different functional groups, such as COCH3 groups comprising piperidine rings, CH3, and C = O, the defect passivation effect is further enhanced, resulting in an increased power conversion efficiency (PCE) of 19.67%. Additionally, the Voc and long-term stability of COCH3-based PesC are substantially improved.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Review Optics

Detecting ionizing radiation using halide perovskite semiconductors processed through solution and alternative methods

Yihui He et al.

Summary: The emergence of metal halide perovskites provides new hope for detecting high-energy radiation with semiconductors. These materials combine exceptional optoelectronic properties, versatile chemistry, and simple synthesis methods, challenging traditional approaches in semiconductor development.

NATURE PHOTONICS (2022)

添加到收藏夹

Article Chemistry, Physical

Engineering the Hole Extraction Interface Enables Single-Crystal MAPbI3 Perovskite Solar Cells with Efficiency Exceeding 22% and Superior Indoor Response

Ning Li et al.

Summary: In this study, hydrophobic P3HT molecules were successfully incorporated into the hole transport layer of perovskite single crystals, resulting in reduced interface and bulk defect density, suppressed nonradiative recombination, accelerated charge transport, and extraction. This led to a significantly enhanced open-circuit voltage and efficiency, making it the highest values achieved for MAPbI(3) single-crystal solar cells. Additionally, the incorporation of P3HT resulted in superior weak light response and an indoor photovoltaic efficiency of 39.2% at 1000 lux irradiation.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sodium fluoride sacrificing layer concept enables high-efficiency and stable methylammonium lead iodide perovskite solar cells

Huimin Xiang et al.

Summary: This study demonstrates a simple and effective approach to enhance the power conversion efficiency (PCE) and stability of MAPbI(3)-based organic-inorganic halide perovskite solar cells (PSCs) by introducing a sodium fluoride (NaF) sacrificing layer and passivating the mesoporous TiO2 electron-transporting layer (ETL). The optimized PSC achieves a high PCE of 20.9% and remarkable stability under moisture, thermal, and sunlight conditions.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Applied

Improved crystallinity and self-healing effects in perovskite solar cells via functional incorporation of polyvinylpyrrolidone

Yunjuan Niu et al.

Summary: By introducing PVP modification, the growth and grain boundary structure of MAPbI(3) perovskite films can be controlled, resulting in devices with good moisture stability and self-healing ability.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

PTB7 as additive in Anti-solvent to enhance perovskite film surface crystallinity for solar cells with efficiency over 21%

Zhen Wang et al.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

Work function engineering to enhance open-circuit voltage in planar perovskite solar cells by g-C3N4 nanosheets

Jian Yang et al.

Summary: This study utilized two-dimensional g-C3N4 nanosheets to modify the TiO2 layers in planar PSCs, effectively improving the efficiency of the solar cells by enhancing Voc and reducing hysteresis phenomenon.

NANO RESEARCH (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Benefitting from Synergistic Effect of Anion and Cation in Antimony Acetate for Stable CH3NH3PbI3-Based Perovskite Solar Cell with Efficiency Beyond 21%

Pengyun Liu et al.

Summary: The use of antimony acetate as an additive in the engineering strategy can enhance the photovoltaic performance of methylammonium lead iodide-based perovskite solar cells, with a power conversion efficiency of above 21% achieved. Antimony acetate plays a role in improving film morphology and optimizing the electronic structure of perovskites, leading to improved stability of the solar cells.

SMALL (2021)

添加到收藏夹

Article Chemistry, Applied

A bilateral cyano molecule serving as an effective additive enables high-efficiency and stable perovskite solar cells

Pengyun Liu et al.

Summary: The introduction of a bilateral cyano molecule as an additive successfully reduced defects and improved the efficiency and long-term stability of hybrid perovskite films in perovskite solar cells.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Physics, Applied

First investigation of additive engineering for highly efficient Cs2AgBiBr6-based lead-free inorganic perovskite solar cells

Xiaoqing Yang et al.

Summary: This study investigates additive engineering in Cs2AgBiBr6-based PSCs, where the introduction of guanidinium thiocyanate (GuaSCN) additive effectively improves perovskite film quality, enhances efficiency, and strengthens stability.

APPLIED PHYSICS REVIEWS (2021)

添加到收藏夹

Article Chemistry, Physical

Interfacial Passivation Engineering of Perovskite Solar Cells with Fill Factor over 82% and Outstanding Operational Stability on n-i-p Architecture

Bowen Yang et al.

Summary: The use of cyclohexylethylammonium iodide (CEAI) as an interface material successfully improved the fill factor and power conversion efficiency of perovskite solar cells. This was achieved through the formation of a 2D perovskite interlayer, which reduced trap-assisted recombination and enhanced surface hydrophobicity for outstanding stability.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

MAAc Ionic Liquid-Assisted Defect Passivation for Efficient and Stable CsPbIBr2 Perovskite Solar Cells

Linxing Shi et al.

Summary: Precoating a methylammonium acetate (MAAc) ionic liquid onto a TiO2 layer before depositing CsPbIBr2 film improves the crystal quality and interface contact, reduces defects, suppresses nonradiative recombination, and enhances the photovoltaic conversion efficiency.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Antisolvent- and Annealing-Free Deposition for Highly Stable Efficient Perovskite Solar Cells via Modified ZnO

Ziyu Wang et al.

Summary: A complexed ZnO material (E-ZnO) was developed as an improved electron selective layer in perovskite solar cells, showing higher electron mobility and better energy level matching compared to traditional ZnO. By utilizing E-ZnO and a new perovskite film fabrication process without annealing or antisolvent, the highest efficiency of 20.39% was achieved for PSCs. Additionally, unencapsulated PSCs with E-ZnO maintained 95% of their initial efficiency after exposure to ambient atmosphere for 3604 hours.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fluorinated Oligomer Wrapped Perovskite Crystals for Inverted MAPbl3 Solar Cells with 21% Efficiency and Enhanced Stability

Lisha Xie et al.

Summary: By passivating defects in perovskite solar cells and effectively inhibiting nonradiative recombination, the synthesized fluorinated oligomer FO-19 achieves a high power conversion efficiency of 21.23% for MAPbI(3)-based PSCs, while also improving humidity and thermal stability. This work provides insights into achieving high-efficiency and stable PSCs through fluorinated additive engineering.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Device Architecture Engineering: Progress toward Next Generation Perovskite Solar Cells

Thomas Webb et al.

Summary: Perovskite solar cells have rapidly established themselves as a promising technology over the past decade, with high efficiency and low processing costs. The emergence of new device architectures has promoted the development of single-junction PSCs, offering new opportunities for light management and stability.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Marked Passivation Effect of Naphthalene-1,8-Dicarboximides in High-Performance Perovskite Solar Cells

Zhihao Zhang et al.

Summary: This study uses two structurally similar polyaromatic molecules to improve the lifetime and efficiency of perovskite solar cells, successfully designing a more effective passivator and achieving higher device efficiency.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reducing Defects Density and Enhancing Hole Extraction for Efficient Perovskite Solar Cells Enabled by π-Pb2+ Interactions

Lirong Wen et al.

Summary: Molecular doping using organic small molecules with fused tricyclic core can reduce defects density and improve performance of perovskite solar cells by enhancing intermolecular pi-Pb2+ interactions and suppressing nonradiative recombination. This strategy also facilitates hole extraction and has significantly increased device efficiency with negligible hysteresis.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Engineering, Environmental

Towards highly stable and efficient planar perovskite solar cells: Materials development, defect control and interfacial engineering

Huimin Xiang et al.

Summary: This review paper focuses on the comprehensive summary of recent advances in developing stable and efficient planar perovskite solar cells (p-PSCs) through materials design, defect control, and interfacial engineering strategies. The underlying origins of stability issues, energy loss, and recent advances in materials development and defect control for p-PSCs are discussed, offering insights for the rational design of highly stable and efficient PSCs.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Deep-Level Transient Spectroscopy for Effective Passivator Selection in Perovskite Solar Cells to Attain High Efficiency over 23%

Xiaodong Ren et al.

Summary: Most studies choose passivators in a trial-and-error fashion to achieve high efficiency in perovskite solar cells. By using DLTS measurements, the type of defects in perovskite films was determined and a passivator was selected to improve efficiency. This work provides a new means to select the best passivator for different types of defects in PSCs.

CHEMSUSCHEM (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Simultaneously Enhancing Efficiency and Stability of Perovskite Solar Cells Through Crystal Cross-Linking Using Fluorophenylboronic Acid

Mingguang Li et al.

Summary: This study demonstrates a one-step solution-processing strategy for preparing efficient and stable inverted methylammonium lead iodide perovskite solar cells (PSCs) by incorporating organic molecule dopants of fluorophenylboronic acids (F-PBAs) into perovskite films. The F-PBA dopant acts as a cross-linker between perovskite grains, improving crystallinity and reducing defect densities. The inverted PSCs with F-PBA dopants exhibit significantly enhanced performance and improved stability under different environmental conditions.

SMALL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Atomic-scale imaging of CH3NH3PbI3 structure and its decomposition pathway

Shulin Chen et al.

Summary: This study investigates the atomic structure and decomposition pathway of organic-inorganic hybrid perovskites, revealing a two-step decomposition process and an intermediate phase. The findings enhance understanding of the photoelectric properties and failure mechanism, offering insights into prevention and recovery of perovskite structure.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Additive-Induced Synergies of Defect Passivation and Energetic Modification toward Highly Efficient Perovskite Solar Cells

Shaobing Xiong et al.

Summary: Defect passivation via additive and energetic modification via interface engineering are effective strategies for achieving high-performance perovskite solar cells. The synergies of pentafluorophenyl acrylate as additive significantly suppress both defect-assisted recombination and interface carrier recombination, resulting in improved device efficiency and stability. This study provides a promising approach by choosing dual functional additives to enhance the efficiency and stability of PSCs.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Boosting Long-Term Stability of Pure Formamidinium Perovskite Solar Cells by Ambient Air Additive Assisted Fabrication

K. M. Muhammed Salim et al.

Summary: This study demonstrates that pure FAPI perovskite solar cells prepared in ambient air exhibit greater long-term stability compared to those fabricated under nitrogen. The addition of PbS quantum dots and methylammonium chloride can enhance the performance and stability of these devices even further.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of Chemical Bonding Nature of Post-Treatment Materials on Photovoltaic Performance of Perovskite Solar Cells

Jeong-Hyeon Kim et al.

Summary: Increasing PyI concentration enhances photovoltaic performance, while PpI is optimized at 5mM. PyI treatment forms a beneficial PyI layer for hole extraction, while PpI treatment forms an insulating PpPbI(3) that blocks charge separation.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Surface recrystallized stable 2D-3D graded perovskite solar cells for efficiency beyond 21%

Rabindranath Garai et al.

Summary: Organic-inorganic hybrid perovskite solar cells have seen rapid efficiency improvements recently, but their commercialization is hindered by instability towards ambient conditions. The formation of a thin layer of 2D perovskite over a 3D structure has enhanced stability and efficiency. Surface treatment with a strategically synthesized multifunctional molecule has led to outstanding efficiencies and improved ambient stability for perovskite solar cells.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Designs from single junctions, heterojunctions to multijunctions for high-performance perovskite solar cells

Xin Wu et al.

Summary: Hybrid metal-halide perovskite solar cells have gained unprecedented attention for their superior photovoltaic performance and low-cost fabrication, achieving high power conversion efficiency through understanding the structure-property relationship and carrier dynamics. The evolution of heterojunction design and multijunction structures plays crucial roles in enhancing efficiency, aiming to surpass 30% PCE in the future.

CHEMICAL SOCIETY REVIEWS (2021)

添加到收藏夹

Article Chemistry, Physical

Efficient surface passivation of perovskite films by a post-treatment method with a minimal dose

Dong-Ho Kang et al.

Summary: A novel post-treatment method UIP-PT for perovskite films is introduced in this study, which significantly reduces surplus iodides on the film surface compared to the conventional APP-PT method, leading to improved stability and minimal traps density in PSCs. This new method also demonstrates negligible current-voltage hysteresis and enhanced activation energy for ion migration, resulting in a device that maintains 96.37% of initial PCE after 1750 hours of storage.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Review Chemistry, Physical

New Strategies for Defect Passivation in High-Efficiency Perovskite Solar Cells

Seckin Akin et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Grain Enlargement and Defect Passivation with Melamine Additives for High Efficiency and Stable CsPbBr3 Perovskite Solar Cells

Jingwei Zhu et al.

CHEMSUSCHEM (2020)

添加到收藏夹

Article Multidisciplinary Sciences

On-device lead sequestration for perovskite solar cells

Xun Li et al.

NATURE (2020)

添加到收藏夹

Review Energy & Fuels

Recent Advances in Cs2AgBiBr6-Based Halide Double Perovskites as Lead-Free and Inorganic Light Absorbers for Perovskite Solar Cells

Xiaoqing Yang et al.

ENERGY & FUELS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Methylamine-assisted growth of uniaxial-oriented perovskite thin films with millimeter-sized grains

Haochen Fan et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

A Correlation between Iodoplumbate and Photovoltaic Performance of Perovskite Solar Cells Observed by Precursor Solution Aging

Gwang Su Shin et al.

SMALL METHODS (2020)

添加到收藏夹

Article Chemistry, Physical

Surface passivation of perovskite thin films by phosphonium halides for efficient and stable solar cells

Qingquan He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

添加到收藏夹

Article Energy & Fuels

Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells

Nengxu Li et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22%

Yuhang Liu et al.

SCIENCE ADVANCES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Jason J. Yoo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Minjin Kim et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Universal Strategy to Utilize Polymeric Semiconductors for Perovskite Solar Cells with Enhanced Efficiency and Longevity

Fangchao Li et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells

Yicheng Zhao et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reduced Interface-Mediated Recombination for High Open-Circuit Voltages in CH3NH3PbI3 Solar Cells

Christian M. Wolff et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Self-host thermally activated delayed fluorescent dendrimers with flexible chains: an effective strategy for non-doped electroluminescent devices based on solution processing

Xinxin Ban et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

添加到收藏夹

Article Energy & Fuels

Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells

Dae-Yong Son et al.

NATURE ENERGY (2016)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.