4.8 Article

Improving and Quantifying Surface Charge Density via Charge Injection Enabled by Air Breakdown

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Fabric-Assisted MXene/Silicone Nanocomposite-Based Triboelectric Nanogenerators for Self-Powered Sensors and Wearable Electronics

Md Salauddin et al.

Summary: A novel scalable surface modification method using fabric-assisted micropatterning technique on highly negative MXene/silicone nanocomposite surface for self-powered sensors and wearable electronics is introduced. The microstructured surface improves the output performance of DSC-TENG by factors of 9.8 and 20 for voltage and peak current density, respectively, compared to flat silicone.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Achieving Remarkable Charge Density via Self-Polarization of Polar High-k Material in a Charge-Excitation Triboelectric Nanogenerator

Huiyuan Wu et al.

Summary: This study focuses on boosting the output charge density of triboelectric nanogenerators (TENGs) through the charge-excitation strategy. It reports a rapid self-polarization effect of a polar dielectric material, which enhances the output charge density by increasing the permittivity of the material. By using a homemade lead zirconate titanate-poly(vinylidene fluoride) composite film in a specific humidity, an ultrahigh charge density is achieved, providing new guidance for practical applications of TENGs.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

An Ultrarobust and High-Performance Rotational Hydrodynamic Triboelectric Nanogenerator Enabled by Automatic Mode Switching and Charge Excitation

Shaoke Fu et al.

Summary: This study introduces an ultrarobust and high-performance rotational TENG with automatic mode switching, which shows excellent electrical output stability and can power a large number of LED lights. By harvesting water-flow energy, it enables quick charging of commercial capacitors and self-powered devices.

ADVANCED MATERIALS (2022)

Article Engineering, Environmental

Enhanced performance of a cellulose nano fi brils-based triboelectric nanogenerator by tuning the surface polarizability and hydrophobicity

Shuangxi Nie et al.

Summary: Cellulose is the most abundant natural polymer on earth, and its renewable, biodegradable, and biocompatible nature makes it an ideal starting material for bio-based triboelectric nanogenerators. In this study, chemical functionalization was used to control surface polarity and hydrophobicity of cellulose nanofibrils, resulting in significant performance improvements for TENGs.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

New Hydrogen Bonding Enhanced Polyvinyl Alcohol Based Self-Charged Medical Mask with Superior Charge Retention and Moisture Resistance Performances

Nannan Wang et al.

Summary: PVA-based medical masks fabricated through electrostatic spinning exhibit superior antistatic and self-charging performance compared to PP-based masks in high humidity environments. They can be easily recharged in situ multiple times by hand slapping.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

The Triboelectric Nanogenerator as an Innovative Technology toward Intelligent Sports

Jianjun Luo et al.

Summary: In the new era of the Internet-of-Things, the development of intelligent sports relies heavily on athletic big data collection and analysis using widely distributed sensing networks. The triboelectric nanogenerator (TENG) has shown great potential in overcoming limitations of conventional sensors with its mechanical energy harvesting and self-powered sensing technology, fabricated using common materials like wood and paper. Progress on TENG-based sports sensing systems, including smart sports facilities and wearable equipment, as well as the remaining challenges and open opportunities in the field of intelligent sports, are summarized.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Negative triboelectric polymers with ultrahigh charge density induced by ion implantation

Yong Fan et al.

Summary: Research has shown that specific N-containing polar groups and unsaturated bonds can alter the structural symmetry of polymers, improving polarity and charge intensity to create stronger polar polymers. A modification strategy based on ion implantation technique has been reported to generate ultrahigh negative triboelectric polymers. These modified fluorinated polymers exhibit ultrahigh negative triboelectric polarity, increased surface charge density, and enhanced energy storage density.

NANO ENERGY (2021)

Review Chemistry, Physical

Nanogenerators for smart cities in the era of 5G and Internet of Things

Xun Zhao et al.

Summary: The rapid development of 5G technology has propelled the advancement of smart cities, with nanogenerators playing a crucial role in providing sustainable power sources and self-powered sensing systems.
Article Chemistry, Multidisciplinary

Triboelectric Polymer with High Thermal Charge Stability for Harvesting Energy from 200 °C Flowing Air

Xinglin Tao et al.

Summary: This study presents a flutter-driven TENG (FD-TENG) designed with modified polyimide and BaTiO3 nanoparticles doped F-PI film, which can maintain high thermal charge stability in high temperature conditions and potentially be applied for wind energy harvesting and wind velocity sensing.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Multidisciplinary Sciences

High performance temperature difference triboelectric nanogenerator

Bolang Cheng et al.

Summary: The authors have designed and fabricated a temperature difference triboelectric nanogenerator to enhance electrical output performance in high temperature environments. By increasing the temperature difference, the output voltage, current, and power of the nanogenerator are significantly increased. However, excessive temperature difference may lead to a decrease in surface charge density and output performance.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

A high humidity-resistive triboelectric nanogenerator via coupling of dielectric material selection and surface-charge engineering

Lu Liu et al.

Summary: The output performance of triboelectric nanogenerators (TENGs) in high humidity environments can be improved by selecting appropriate dielectric materials and surface charge engineering, especially by increasing the hydrophobicity of the dielectric materials. Ionic charges are found to be more stable than electronic charges under humid conditions, and a TENG utilizing hydrophobic dielectric material of PTFE and ion injection strategy retained around 91% of its initial output performance after 50,000 operation cycles at 90% relative humidity. This work not only demonstrates a technique for high humidity-resistive TENGs, but also opens opportunities for practical applications in diverse environments.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

An inverting TENG to realize the AC mode based on the coupling of triboelectrification and air-breakdown

Chuncai Shan et al.

Summary: The TENG has two output modes - AC and DC, and an inverting TENG has been proposed to convert DC into AC by setting alternating polarity distribution areas. Unlike traditional AC-TENG, the inverting TENG allows for changing the width ratio and amplitude ratio of AC signals by adjusting the distributed width and electronegativity difference of two opposite materials.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Materials Science, Multidisciplinary

Advanced designs for output improvement of triboelectric nanogenerator system

Wenlin Liu et al.

Summary: The large-scale popularization of 5G mobile network technology has accelerated the emergence of a modern intelligent society, posing challenges for high-precision sensors and distributed power supply. Triboelectric nanogenerator shows great potential as a distributed power source, but its commercial use is hindered by insufficient function modes and output performance.

MATERIALS TODAY (2021)

Review Materials Science, Multidisciplinary

Material aspects of triboelectric energy generation and sensors

Dong Wook Kim et al.

NPG ASIA MATERIALS (2020)

Review Engineering, Mechanical

Triboelectric nanogenerators: Fundamental physics and potential applications

Linglin Zhou et al.

FRICTION (2020)

Article Chemistry, Multidisciplinary

Manipulating the triboelectric surface charge density of polymers by low-energy helium ion irradiation/implantation

Shuyao Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Multidisciplinary Sciences

Integrated charge excitation triboelectric nanogenerator

Wenlin Liu et al.

NATURE COMMUNICATIONS (2019)

Article Multidisciplinary Sciences

A universal standardized method for output capability assessment of nanogenerators

Xin Xia et al.

NATURE COMMUNICATIONS (2019)

Article Multidisciplinary Sciences

Achieving ultrahigh triboelectric charge density for efficient energy harvesting

Jie Wang et al.

NATURE COMMUNICATIONS (2017)

Article Nanoscience & Nanotechnology

Enhancing Performance of Triboelectric Nanogenerator by Filling High Dielectric Nanoparticles into Sponge PDMS Film

Jie Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Multidisciplinary Sciences

Standards and figure-of-merits for quantifying the performance of triboelectric nanogenerators

Yunlong Zi et al.

NATURE COMMUNICATIONS (2015)

Article Nanoscience & Nanotechnology

Airflow-Induced Triboelectric Nanogenerator as a Self-Powered Sensor for Detecting Humidity and Airflow Rate

Hengyu Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Physical

Effect of humidity and pressure on the triboelectric nanogenerator

Vu Nguyen et al.

NANO ENERGY (2013)

Article Physics, Fluids & Plasmas

Calculation of the townsend discharge coefficients and the Paschen curve coefficients

K. T. A. L. Burm

CONTRIBUTIONS TO PLASMA PHYSICS (2007)