相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Temperature-dependent hardening contributions in CrFeCoNi high-entropy alloy
Muhammad Naeem et al.
ACTA MATERIALIA (2021)
Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications
D. D. Zhang et al.
ACTA MATERIALIA (2021)
Recovery of cold-worked Al0.3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation
S. Dasari et al.
ACTA MATERIALIA (2021)
Mechanical behavior of high-entropy alloys
Weidong Li et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Achieving excellent strength-ductility synergy in twinned NiCoCr medium-entropy alloy via Al/Ta co-doping
D. D. Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy
Mike Schneider et al.
ACTA MATERIALIA (2021)
Effect of Ta content on stacking fault energy and microstructure characteristics of (VCoNi)100-XTaX (X=0, 0.05, 0.5 and 1) medium entropy alloy
Jian Tu et al.
MATERIALS LETTERS (2021)
Temperature-dependent mechanisms of dislocation–twin boundary interactions in Ni-based equiatomic alloys
Sho Hayakawa et al.
ACTA MATERIALIA (2021)
Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Peijian Shi et al.
SCIENCE (2021)
Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy
Rui Feng et al.
NATURE COMMUNICATIONS (2021)
On the exceptional damage-tolerance of gradient metallic materials
Ruqing Cao et al.
MATERIALS TODAY (2020)
Generalized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy
Xun Sun et al.
NANOMATERIALS (2020)
Microstructural evolution, mechanical and corrosion behaviors of as-annealed CoCrFeNiMox (x=0, 0.2, 0.5, 0.8, 1) high entropy alloys
Zuozhe Niu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Strengthening of an Al0.45CoCrFeNi high-entropy alloy via in situ fabricated duplex-structured composites
Jinxiong Hou et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Superior strength-ductility combination of a Co-rich CoCrNiAlTi high-entropy alloy at room and cryogenic temperatures
X. H. Du et al.
MATERIALS RESEARCH EXPRESS (2020)
A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature
B. B. Bian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Towards ferrous medium-entropy alloys with low-cost and high-performance
Jae Wung Bae et al.
SCRIPTA MATERIALIA (2020)
Hetero-deformation-induced strengthening by twin-mediated martensitic transformation in an immiscible medium-entropy alloy
Jongun Moon et al.
SCRIPTA MATERIALIA (2020)
Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys
Peijian Shi et al.
MATERIALS TODAY (2020)
Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: In situ neutron diffraction
Lei Tang et al.
ACTA MATERIALIA (2020)
Cryogenic behaviour of the Al5Ti5Co35Ni35Fe20 multi-principal component alloy
K. Gorecki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Role of BCC phase on tensile behavior of dual-phase Al0.5CoCrFeMnNi high-entropy alloy at cryogenic temperature
Jeong Min Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae
Peijian Shi et al.
NATURE COMMUNICATIONS (2019)
Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo0.2 High Entropy Alloy
Cui Zhang et al.
ENTROPY (2019)
Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures
Z. F. He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Superior cryogenic tensile properties of ultrafine-grained CoCrNi medium-entropy alloy produced by high-pressure torsion and annealing
Praveen Sathiyamoorthi et al.
SCRIPTA MATERIALIA (2019)
Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy
T. Yang et al.
SCRIPTA MATERIALIA (2019)
Dynamic tensile deformation and microstructural evolution of AlxCrMnFeCoNi high-entropy alloys
C. M. Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High-entropy alloys
Easo P. George et al.
NATURE REVIEWS MATERIALS (2019)
Synergistic effect by Al addition in improving mechanical performance of CoCrNi medium-entropy alloy
Donghee Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of prolonged aging on phase evolution and mechanical properties of intermetallic strengthened CoCrFeNi2.1Nbx high entropy alloys
U. Sunkari et al.
MATERIALS LETTERS (2019)
Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures
Q. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Exceptional cryogenic strength-ductility synergy in Al0.3CoCrNi medium-entropy alloy through heterogeneous grain structure and nano-scale precipitates
Praveen Sathiyamoorthi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of Alloying Elements on the Stacking Fault Energies of Ni58Cr32Fe10 Alloys: A First-Principle Study
Yuchen Dou et al.
METALS (2019)
Utilization of brittle σ phase for strengthening and strain hardening in ductile VCrFeNi high-entropy alloy
Y. H. Jo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures
Junpeng Liu et al.
SCIENCE CHINA-MATERIALS (2019)
Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds
Deep Choudhuri et al.
ACTA MATERIALIA (2019)
Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures
Y. Tong et al.
ACTA MATERIALIA (2019)
Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures
Yan Ma et al.
ACTA MATERIALIA (2018)
Dislocation-type evolution in quasi-statically compressed polycrystalline nickel
Chaoyi Zhu et al.
ACTA MATERIALIA (2018)
Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy
G. Laplanche et al.
ACTA MATERIALIA (2018)
Twinning-induced plasticity (TWIP) steels
Bruno C. De Cooman et al.
ACTA MATERIALIA (2018)
BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys
Indranil Basu et al.
ACTA MATERIALIA (2018)
Effect of low-temperature on mechanical behavior for an AISI 304 austenitic stainless steel
Chengsi Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Interface affected zone for optimal strength and ductility in heterogeneous laminate
C. X. Huang et al.
MATERIALS TODAY (2018)
Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength
Muxin Yang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)
Exceptional phase-transformation strengthening of ferrous medium entropy alloys at cryogenic temperatures
Jae Wung Bae et al.
ACTA MATERIALIA (2018)
Fundamental understanding of mechanical behavior of high-entropy alloys at low temperatures: A review
Zongyang Lyu et al.
JOURNAL OF MATERIALS RESEARCH (2018)
High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys
Yao-Jian Liang et al.
NATURE COMMUNICATIONS (2018)
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
T. Yang et al.
SCIENCE (2018)
Micromechanical finite element analysis of the effects of martensite morphology on the overall mechanical behavior of dual phase steel
Najmul H. Abid et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
High dislocation density-induced large ductility in deformed and partitioned steels
B. B. He et al.
SCIENCE (2017)
Precipitation strengthening of ductile Cr15Fe20Co35Ni20Mo10 alloys
Kaisheng Ming et al.
SCRIPTA MATERIALIA (2017)
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
Y. H. Jo et al.
NATURE COMMUNICATIONS (2017)
Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
Zijiao Zhang et al.
NATURE COMMUNICATIONS (2017)
Heterogeneous materials: a new class of materials with unprecedented mechanical properties
Xiaolei Wu et al.
MATERIALS RESEARCH LETTERS (2017)
Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy
Xuzhou Gao et al.
ACTA MATERIALIA (2017)
Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy
Y. L. Zhao et al.
ACTA MATERIALIA (2017)
Stacking fault energies of face-centered cubic concentrated solid solution alloys
Shijun Zhao et al.
ACTA MATERIALIA (2017)
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
J. Miao et al.
ACTA MATERIALIA (2017)
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
G. Laplanche et al.
ACTA MATERIALIA (2017)
Improving strength and toughness of materials by utilizing spatial variations of the yield stress
M. Sistaninia et al.
ACTA MATERIALIA (2017)
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
G. Laplanche et al.
ACTA MATERIALIA (2016)
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
W. H. Liu et al.
ACTA MATERIALIA (2016)
The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures
DongYue Li et al.
INTERMETALLICS (2016)
Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off
Zhiming Li et al.
NATURE (2016)
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Bernd Gludovatz et al.
NATURE COMMUNICATIONS (2016)
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
Seok Su Sohn et al.
ACTA MATERIALIA (2015)
The influence of stacking fault energy on the microstructural and strainhardening evolution of Fe-Mn-Al-Si steels during tensile deformation
D. T. Pierce et al.
ACTA MATERIALIA (2015)
Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys
W. H. Liu et al.
INTERMETALLICS (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy
Shuo Huang et al.
SCRIPTA MATERIALIA (2015)
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
Z. Wu et al.
ACTA MATERIALIA (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
F. Otto et al.
ACTA MATERIALIA (2013)
Low temperature mechanical properties of 316L type stainless steel after hydrostatic extrusion
P. Czarkowski et al.
FUSION ENGINEERING AND DESIGN (2011)
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Sheng Guo et al.
JOURNAL OF APPLIED PHYSICS (2011)
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
K. Lu et al.
SCIENCE (2009)
Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element
A Takeuchi et al.
MATERIALS TRANSACTIONS (2005)
Properties of thermomechanically processed dual-phase steels containing fibrous martensite
SJ Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Impact tensile behavior of 9% nickel steel at low temperature
HS Shin et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2000)
分享论文
