Variation in physical and mechanical properties of fired-clay bricks incorporating ETP biosolids

This study was directed towards investigating the possibility of incorporating biosolids from Melbourne's Eastern Treatment Plant (ETP) in fired clay bricks. First, the mineralogical and chemical compositions as well as geotechnical characteristics of the ETP biosolids and brick soil were determined. Then, bricks were fabricated with five different percentages of ETP biosolids (5%, 15%, 25%, 35%, and 50%) by firing them at a temperature 1020 degrees C for 3 h. The effect of incorporating ETP biosolids in a ceramic body on the physical and mechanical properties of fired-bricks was assessed by shrinkage, weight loss on ignition (LOI), water absorption, density, initial rate of absorption (IRA), compressive strength, efflorescence, scanning electron microscopy (SEM), and leachate analysis. The compressive strength of biosolids amended bricks ranged from 24.9 to 37.0 MPa, which met the requirements of the Australian Standards. Moreover, bricks with ETP biosolids can save up to 25% of energy during the firing in an electric furnace, which is very important in terms of sustainable development. The leachate analysis results showed that the concentration of heavy metals leached is insignificant and much lower than the regulatory limits. (C) 2016 Elsevier Ltd. All rights reserved.