Plasma jet printing of metallic patterns in zero gravity

Article Materials Science, Multidisciplinary

Optical Printing of Conductive Silver on Ultrasmooth Nanocellulose Paper for Flexible Electronics

Yueyue Pan et al.

Summary: The article presents a visible light-induced printing technique for highly conductive silver patterns on nanopaper, which is simple and cost-effective and can be used for fabricating flexible circuits and biosensors.

ADVANCED ENGINEERING MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Facile Synthesis of Silver Nanoparticles and Preparation of Conductive Ink

Gui Bing Hong et al.

Summary: In this study, silver nanoparticles were successfully prepared using a chemical reduction synthesis method, followed by low-temperature sintering to obtain Ag-conductive ink for flexible substrate application. The size and shape of the AgNPs were well controlled by varying reaction parameters, and the electrical resistivity of the ink was optimized under specific sintering conditions. These findings may have implications for future research on other metals as well.

NANOMATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-conductivity flexible Ag films formed by low-temperature and short-time sintering of PVP-modified silver oxalate composite ink

PeiYuan Fan et al.

Summary: The study successfully reduced the sintering temperature and time for silver composite conductive ink modified by PVP, resulting in a silver film with good electrical conductivity.

MATERIALS RESEARCH EXPRESS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Conductive Networks of Silver Nanosheets

Adam G. Kelly et al.

Summary: This study describes a dispersion of silver nanosheets that can be printed into highly conductive networks. Using a commercial thermal inkjet printer, highly conductive silver nanosheet patterns can be printed, which can form electromagnetic interference shields with record shielding effectiveness. Additionally, high resolution patterns with high conductivity can be printed using an aerosol-jet printer.

SMALL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

In-Depth Investigation of Inkjet-Printed Silver Electrodes over Large-Area: Ink Recipe, Flow, and Solidification

Lu Zhou et al.

Summary: This paper presents an in-depth investigation and optimization of template-less inkjet printing for metal mesh-based transparent conducting electrodes. The study focuses on the conductive ink formulation, droplet coalescence and crawling, and solidification processes. The results show that ideal silver lines with high conductivity can be obtained and passive matrix organic light emitting diodes based on silver array electrodes can be successfully fabricated.

ADVANCED MATERIALS INTERFACES (2022)

添加到收藏夹

Article Chemistry, Physical

Low content and low-temperature cured silver nanoparticles/silver ion composite ink for flexible electronic applications with robust mechanical performance

Hao Jiang et al.

Summary: A novel and cost-effective silver nanoparticles/silver ion composite ink was developed for printing conductive patterns on a flexible substrate. The study found a close relationship between the morphology, elemental composition, heating characteristics, and electrical resistivity of the ink and printed pattern, as well as the adhesion strength and mechanical stability of the pattern. The AgNPs and silver ions in the composite ink mutually promoted each other to significantly reduce the curing temperature, achieving satisfying electrical resistivity with low silver content.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Analytical

Application of Plasma-Printed Paper-Based SERS Substrate for Cocaine Detection

Rhiannon Alder et al.

Summary: Surface-enhanced Raman spectroscopy (SERS) technology is a promising method for on-site screening of illicit drugs, with the development of an atmospheric-pressure plasma-assisted chemical deposition process resulting in a lower cost SERS strip with higher detection sensitivity for drugs such as cocaine. The plasma-printed substrate demonstrated a detection limit as low as 1 ng/mL for cocaine, showing potential for cost-effective and reliable drug detection applications.

SENSORS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of different thermal sintering temperatures on pattern resistivity of printed silver ink with multiple particle sizes

Zhiheng Yu et al.

Summary: This study investigates the effects of sintering temperature on the resistivity of a conductive pattern and the subsequent performance of nano-ink. The results show that after complete sintering, the prepared ink exhibits significantly lower porosity, resistivity, and thermal conductivity compared to commercial ink.

AIP ADVANCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Atmospheric Pressure and Ambient Temperature Plasma Jet Sintering of Aerosol Jet Printed Silver Nanoparticles

Nazli Turan et al.

Summary: The passage discusses the application of atmospheric pressure nonthermal plasmas in sintering printed films, demonstrating the surface modifications achieved through nonthermal plasmas under ambient conditions. These results offer a new direction for future electronic device manufacturing, showcasing the potential of utilizing nonthermal plasmas for additive manufacturing on flexible and low-melting-point materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Inkjet Printed Heating Elements Based on Nanoparticle Silver Ink with Adjustable Temperature Distribution for Flexible Applications

Dana Mitra et al.

Summary: This study utilizes digital inkjet printing technology to manufacture heating elements, achieving uniform temperature distribution and heat development by controlling the number and width of meander lines. The feasibility of manufacturing printed thin devices on relatively low-cost materials and the stability and thermal performance of inkjet printed heaters were demonstrated in the experiments.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2021)

添加到收藏夹

Article Chemistry, Analytical

Inkjet-printed flexible silver electrodes on thiol-enes

Eero Kuusisto et al.

Summary: Flexible and conductive silver electrodes were successfully fabricated using inkjet printing on thiol-ene polymer substrates, achieving low resistivity by optimizing printing parameters and selecting appropriate compositions. Rough surfaces showed enhanced quality of printed electrodes, while electrodes printed on smooth surfaces were more prone to cracks. The electrodes demonstrated good conductivity even after mechanical stress and bending, indicating potential for flexible sensors.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Highly conductive electronics circuits from aerosol jet printed silver inks

Kacper Skarzynski et al.

Summary: Enhancement of silver nanoparticles ink for micro-scale printed electronics technique, Aerosol Jet Printing, by using cationic and non-ionic surfactants has shown promising features for application in modern electronics. The addition of surfactants not only improves electrical conductivity and printability but also reduces resistivity values significantly, making printed lines more uniform and patterns narrower.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Overview of recent progress in electrohydrodynamic jet printing in practical printed electronics: focus on the variety of printable materials for each component

Hyeok-jin Kwon et al.

Summary: Printed electronics, especially the application of EHD jet printing technology, plays a crucial role in manufacturing next-generation electronic devices and has great potential for development.

MATERIALS ADVANCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inkjet printing of silver nanowires on flexible surfaces and methodologies to improve the conductivity and stability of the printed patterns

Prathamesh Patil et al.

Summary: A systematic approach for printing on flexible surfaces using AgNWs has been developed, with optimized ink formulation showing high conductivity and stability. The study demonstrates the importance of nanowire fragmentation and varied concentrations for achieving highly conductive printed patterns efficiently.

NANOSCALE ADVANCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Microplasmas for Advanced Materials and Devices

Wei-Hung Chiang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

Printed Electronics as Prepared by Inkjet Printing

Vimanyu Beedasy et al.

MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Aerosol Jet Printing of Silver Lines with A High Aspect Ratio on A Heated Silicon Substrate

Alexey Efimov et al.

MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Silver nanoparticle conductive inks: synthesis, characterization, and fabrication of inkjet-printed flexible electrodes

Iara J. Fernandes et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Inkjet printing for flexible and wearable electronics

Ke Yan et al.

APL MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Atmospheric Pressure Plasma Printing of Nanomaterials for IoT Applications

Rahul Ramamurti et al.

IEEE OPEN JOURNAL OF NANOTECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rapid prototyping of microwave metasurfaces by ink-jet printing on polyester (PET) transparencies

Dragoslav Grbovic et al.

FLEXIBLE AND PRINTED ELECTRONICS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of digital printing technologies for electronic materials

Kye-Si Kwon et al.

FLEXIBLE AND PRINTED ELECTRONICS (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Combined Chemical and Thermal Sintering for High Conductivity Inkjet-printed Silver Nanoink on Flexible Substrates

I. Ivanisevic et al.

CHEMICAL AND BIOCHEMICAL ENGINEERING QUARTERLY (2019)

添加到收藏夹

Article Automation & Control Systems

3D Printing in Zero G Technology Demonstration Mission: complete experimental results and summary of related material modeling efforts

Tracie Prater et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Electrochemistry

Inkjet Printing on PET Substrate

Manjurul Ahsan Riheen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Direct plasma printing of nano-gold from an inorganic precursor

Jungmi Hong et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Plasma jet based in situ reduction of copper oxide in direct write printing

Avishek Dey et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Plasma Jet Printing and in Situ Reduction of Highly Acidic Graphene Oxide

Avishek Dey et al.

ACS NANO (2018)

添加到收藏夹

Article Physics, Applied

Development of plasma-assisted inkjet printing and demonstration for direct printing of conductive silver line

Masanao Tsumaki et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Room-Temperature Plasma-Assisted Inkjet Printing of Highly Conductive Silver on Paper

Caroline E. Knapp et al.

ADVANCED MATERIALS TECHNOLOGIES (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Selective laser sintering of inkjet-printed silver nanoparticle inks on paper substrates to achieve highly conductive patterns

Enkeleda Balliu et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Multi-Layer Inkjet Printing of Ag Nanoparticle Inks and Its Sintering with a Near-Infrared System

Ki-Hak Sung et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2018)

添加到收藏夹

Article Engineering, Mechanical

Analysis of specimens from phase I of the 3D printing in Zero G technology demonstration mission

Tracie Prater et al.

RAPID PROTOTYPING JOURNAL (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D Inkjet Printing of Electronics Using UV Conversion

Ehab Saleh et al.

ADVANCED MATERIALS TECHNOLOGIES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sintering strategies for inkjet printed metallic traces in 3D printed electronics

Ali Roshanghias et al.

FLEXIBLE AND PRINTED ELECTRONICS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Combined Inkjet Printing and Infrared Sintering of Silver Nanoparticles using a Swathe-by-Swathe and Layer-by-Layer Approach for 3-Dimensional Structures

Jayasheelan Vaithilingam et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Physics, Applied

Plasma jet printing for flexible substrates

Ram P. Gandhiraman et al.

APPLIED PHYSICS LETTERS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Laser-assisted direct ink writing of planar and 3D metal architectures

Mark A. Skylar-Scott et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Plasma Jet Printing of Electronic Materials on Flexible and Nonconformal Objects

Ram P. Gandhiraman et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Engineering, Aerospace

Building components for an outpost on the Lunar soil by means of a novel 3D printing technology

Giovanni Cesaretti et al.

ACTA ASTRONAUTICA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and characterization of conductive silver ink for electrode printing on cellulose film

Mohammad Abu Hasan Khondoker et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inkjet Printing-Process and Its Applications

Madhusudan Singh et al.

ADVANCED MATERIALS (2010)

添加到收藏夹

Article Physics, Applied

Computational simulation of coupled nonequilibrium discharge and compressible flow phenomena in a microplasma thruster

Thomas Deconinck et al.

JOURNAL OF APPLIED PHYSICS (2009)

添加到收藏夹

Article Physics, Fluids & Plasmas

Electron and ion kinetics in a DC microplasma at atmospheric pressure

Jun Choi et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2007)

添加到收藏夹

Article Physics, Fluids & Plasmas

High-speed photographs of a dielectric barrier atmospheric pressure plasma jet

M Teschke et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2005)

添加到收藏夹

Plasma jet printing of metallic patterns in zero gravity

相关参考文献

导出引文

分享论文