4.7 Article

NiO-based sensor for in situ CO monitoring above 1000 °C: behavior and mechanism

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Hierarchical PVDF-HFP/ZnO composite nanofiber-based highly sensitive piezoelectric sensor for wireless workout monitoring

Guo-Yi Li et al.

Summary: A high-sensitivity piezoelectric sensor has been developed by epitaxial growing ZnO nanosheets on PVDF-HFP nanofibers, enabling precise monitoring of subtle motion changes. This sensor exhibits high sensitivity, short response time, excellent durability and stability, and can accurately detect motion changes in athletes to prevent injuries from overtraining.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Chemistry, Analytical

LaNbO4 as an electrode material for mixed-potential CO gas sensors

Hongming Liu et al.

Summary: LaNbO4 powder was used as a sensing material to fabricate a potentiometric sensor for carbon monoxide detection, showing good sensitivity and selectivity. The sensor exhibited linear response to CO concentration, low sensitivity to interfering gases, and insensitivity to oxygen concentration and water vapor.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Inorganic & Nuclear

Co3O4 nanoparticle-dotted hierarchical-assembled carbon nanosheet framework catalysts with the formation/decomposition mechanisms of Li2O2 for smart lithium-oxygen batteries

Yanjie Zhai et al.

Summary: This study improves the performance of Li-O-2 batteries by fabricating carbon nanosheet structures dotted with cobalt oxide nanoparticles, addressing the issues of low-activity catalysts and inefficient product evolution.

INORGANIC CHEMISTRY FRONTIERS (2022)

Article Nanoscience & Nanotechnology

Enhanced electromagnetic wave absorption of engineered epoxy nanocomposites with the assistance of polyaniline fillers

Jiang Guo et al.

Summary: In this study, polyaniline (PANI)/epoxy composites were reinforced with PANI-M to enhance their electromagnetic wave absorption performance and mechanical properties. The synergistic effect of PANI fillers with different geometries led to a significant improvement in reflection loss at high frequencies, as well as the mechanical properties. Characterization of the PANI fillers prepared by different methods revealed their structural and morphological properties, providing guidance for the preparation of advanced engineered epoxy nanocomposites.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article

Electrospun ZnO Nanofiber Based Resistive Gas/Vapor Sensors -A Review

Niranjan N Prabhu et al.

Engineered Science (2022)

Article Materials Science, Multidisciplinary

Magnetic NiFe2O4/Polypyrrole nanocomposites with enhanced electromagnetic wave absorption

Jiang Guo et al.

Summary: NiFe2O4/polypyrrole nanocomposites demonstrate negative permittivity in the low frequency regions and significantly enhanced electromagnetic wave absorption property in the high frequency regions. The enhanced negative permittivity is observed in the nanocomposites with different NiFe2O4 loadings, indicating the formation of a metal-like electrical conducting network. The minimum reflection loss of -40.8 dB is achieved in the 40.0 wt% NiFe2O4/PPy composites with a thickness of 1.9 mm. The research work provides guidance for the fabrication of nanocomposites with excellent electromagnetic wave absorption.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Review Nanoscience & Nanotechnology

Oxidative degradation of phenols and substituted phenols in the water and atmosphere: a review

Jianfei Sun et al.

Summary: Phenols, as a class of toxic compounds, pose potential risks to the environment and human beings due to their difficulty in biodegradation. This paper reviews the environmental degradation of phenols and substituted phenols in water and air, and summarizes the methods and mechanisms for their treatment in wastewater and atmospheric degradation.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Ionic liquid enabled flexible transparent polydimethylsiloxane sensors for both strain and temperature sensing

Niu Jiang et al.

Summary: The research proposed a new strategy by using ionic liquid instead of traditional solid conductive nanoparticles to design a stretchable and transparent multifunctional sensor. This sensor exhibits high flexibility, transparency, high sensitivity to strain and temperature, and outstanding monotonicity and linearity of the output signals.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Highly sensitive and selective 2-nitroaniline chemical sensor based on Ce-doped SnO2 nanosheets/Nafion-modified glassy carbon electrode

Ahmad Umar et al.

Summary: In this study, pure SnO2 and Ce-doped SnO2 nanosheets were successfully synthesized using a simple hydrothermal method, and characterized using various techniques. Electrochemical tests showed that the 3% Ce-doped SnO2 nanosheets exhibited high sensitivity and a wide linear range for detecting 2-nitroaniline, with good selectivity. This newly developed sensor electrode demonstrated excellent performance in the detection of 2-nitroaniline in the presence of common interfering species.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Review Nanoscience & Nanotechnology

Advances in transparent and stretchable strain sensors

Xiaohua Chang et al.

Summary: This review paper focuses on the strategies to achieve transparency in stretchable strain sensors, summarizing advances and applications of different types of stretchable and transparent sensors, as well as presenting open questions and potential solutions in this field.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Review Thermodynamics

Process in micro-combustion and energy conversion of micro power system: A review

E. Jiaqiang et al.

Summary: This article reviews the research on micro power equipment focusing on flame optimization and energy conversion efficiency. Different influencing parameters in various systems, such as combustion efficiency and conversion efficiency, are analyzed, emphasizing the significance of energy conversion efficiency in micro power equipment.

ENERGY CONVERSION AND MANAGEMENT (2021)

Review Nanoscience & Nanotechnology

Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors

Yongpeng Ma et al.

Summary: This study summarizes recent advances in transition metal oxides as electrodes for high-performance supercapacitors in different dimensions, highlighting the importance of the relationship between structure and property in designing and synthesizing high-performance transition metal oxide-based supercapacitor electrodes.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Chemistry, Physical

Agaric-like anodes of porous carbon decorated with MoO2 nanoparticles for stable ultralong cycling lifespan and high-rate lithium/sodium storage

Chuanxin Hou et al.

Summary: The MoO2 nanoparticles decorated porous carbon anodes showed outstanding electrochemical performance for reversible Li/Na storage, with the highly graphitized porous carbon matrix effectively mitigating volume changes and improving reversible capacity. The MoO2/C electrodes exhibited ultralong cycling performance under high current density, demonstrating great potential for commercialization in next-generation anode electrodes for Li/Na ion batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Analytical

Development of a selective ammonia YSZ-based sensor and modeling of its response

Gita Nematbakhsh Abkenar et al.

Summary: In this study, Au-V2O5 sensing material was tested as a sensing electrode for developing mixed-potential ammonia gas sensors. By adjusting the V2O5 content, selective ammonia sensors could be achieved at high temperatures. The selectivity of the sensor to NH3 and other gases varied under different conditions.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Stability improvement of layered Au,Pt-YSZ mixed-potential gas sensing electrodes by cathodic polarization: Studies by steady state and dynamic electrochemical methods

X. Zhang et al.

Summary: The electrochemical characteristics of a layered Au,Pt-YSZ mixed-potential (APE) gas sensing electrode were studied, showing a drastic reduction in mixed-potential response to CO after 100 days of operation in ambient air, which can be almost fully restored by applying cathodic polarization treatment. Additionally, polarization treatment at elevated temperatures enhanced the regeneration effect on electrochemical behaviors.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Nanoscience & Nanotechnology

High-performance strain sensors based on bilayer carbon black/PDMS hybrids

Meifeng Hu et al.

Summary: Flexile and soft strain sensors have attracted attention for applications in health monitoring, human motion detection, and more. A reliable strain sensor with high sensibility and large tensile strain has been designed and fabricated, based on a bilayer hybrid structure. The sensor shows excellent stability and reversibility even after 10,000 cycles of stretching, enabling widespread application in detecting large-strains and subtle human motions.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Poly(sodium-p-styrenesulfonate)-grafted UiO-66 composite membranes boosting highly efficient molecular separation for environmental remediation

Xi Quan Cheng et al.

Summary: The highly dispersed UiO-66-PSS nanoparticles show promise in constructing molecular separation membranes with high separation performance for environmental remediation, significantly improving permeance and selectivity of the membranes.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Tunable positive magnetoresistance of magnetic polyaniline nanocomposites

Jiang Guo et al.

Summary: The tunable positive magnetoresistance of polyaniline (PANI) nanocomposites with different magnetic nanoparticles was achieved through surface-initiated polymerization (SIP). The coated magnetic nanoparticles on PANI surface were confirmed by various characterizations. The effects of magnetic field and magnetic nanoparticles on charge carrier behavior were studied, showing decreased localization length and hopping length with increasing magnetic field, and increased density of state at the Fermi level.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Photocatalytic oxidation removal of fluoride ion in wastewater by g-C3N4/TiO2 under simulated visible light

Chunling Lin et al.

Summary: The highly active g-C3N4/TiO2 heterojunction nanocomposites were successfully synthesized using a hydro-thermal method and calcination, showing a significantly higher photocatalytic activity compared to pure g-C3N4. Characterization and photocatalytic activity tests revealed that the heterojunction played a key role in the efficient separation of photogenerated electron-hole pairs and rapid charge transfer.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Tunable magnetoresistance of core-shell structured polyaniline nanocomposites with 0-, 1-, and 2-dimensional nanocarbons

Jiang Guo et al.

Summary: In this study, core-shell structured polyaniline nanocomposites with tunable magnetoresistance were successfully synthesized through facial surface-initiated polymerization method with assistance of various nanocarbons. The improved dielectric properties and typical semiconducting behavior were observed in the PANI nanocomposites. Positive magnetoresistance was observed in all samples, and the magnetoresistance value can be controlled by the type and loading percentage of nanocarbons.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Structural and catalytic properties of Fe and Ni doping on CuMnOx catalyst for CO oxidation

Subhashish Dey et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

Article Chemistry, Physical

A high-temperature mixed potential CO gas sensor forin situcombustion control

Yi Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Economics

Revisiting the role of natural gas as a transition fuel

Roberto F. Aguilera et al.

MINERAL ECONOMICS (2020)

Article Chemistry, Analytical

CO sensing performances of YSZ-based sensor attached with sol-gel derived ZnO nanospheres

Kamaraj Mahendraprabhu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

A finite element model for mixed potential sensors

Thomas Ritter et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Electrochemistry

CO Response Characteristics of NiFe2O4 Sensing Material at Elevated Temperature

Bin Yang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Chemistry, Analytical

YSZ-based sensor using Cr-Fe-based spinel-oxide electrodes for selective detection of CO

Sri Ayu Anggraini et al.

ANALYTICA CHIMICA ACTA (2017)

Article Engineering, Electrical & Electronic

Application of nickel oxide thin films in NiO/Ag multilayer energy-efficient coatings

M. F. Al-Kuhaili et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2015)

Review Green & Sustainable Science & Technology

A global review of energy consumption, CO2 emissions and policy in the residential sector (with an overview of the top ten CO2 emitting countries)

Payam Nejat et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Chemistry, Analytical

Novel Zn-M-O (M = Sn, Co) sensing electrodes for selective mixed potential CO/C3H8 sensors

Fangjie Sun et al.

SENSORS AND ACTUATORS B-CHEMICAL (2013)

Article Nanoscience & Nanotechnology

Investigation of the properties of nanostructured Li-doped NiO films using the modified spray pyrolysis method

Wu Chia-Ching et al.

NANOSCALE RESEARCH LETTERS (2013)

Article Spectroscopy

Use of oxygen/nickel ratios in the XPS characterisation of oxide phases on nickel metal and nickel alloy surfaces

B. P. Payne et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2012)

Article Physics, Applied

Microscopic mechanism for unipolar resistive switching behaviour of nickel oxides

Y. S. Chen et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2012)

Article Electrochemistry

Modeling Impedance Response of SOFC Cathodes Prepared by Infiltration

F. Bidrawn et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Article Electrochemistry

Novel nanosized ITO electrode for mixed potential gas sensor

XG Li et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)