☆ 4.5 Article

Modeling and optimizing the specific cutting energy of medium density fiberboard during the helical up-milling process

WOOD MATERIAL SCIENCE & ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Study of Cutting Power and Power Efficiency during Straight-Tooth Cylindrical Milling Process of Particle Boards

Rongrong Li et al.

Summary: The cutting power consumption of milling has a direct effect on the economic benefits of manufacturing particle boards. This study investigates the influence of milling parameters on the cutting power and finds that the rake angle, rotation speed of the main shaft, and depth of milling are the key factors affecting the cutting power.

MATERIALS (2022)

添加到收藏夹

Article Forestry

Effects of helix angle and feed per knife on cutting forces, noise, and power consumption produced during helical planing of sugar maple wood

Paul Wellenreiter et al.

Summary: In this study, the effects of conventional straight knife cutterhead and three helical knife cutterheads on planing sugar maple wood were evaluated. The results showed that helical tools performed better in terms of cutting forces, sound level, and power consumption, particularly at higher feeds per knife.

CANADIAN JOURNAL OF FOREST RESEARCH (2022)

添加到收藏夹

Article Engineering, Manufacturing

Study on helical milling performance of wood-plastic composites

Zhanwen Wu et al.

Summary: This paper investigates the effects of cutting parameters and tool parameters on cutting force and surface quality in wood-plastic composite (WPC) helical milling. The results provide scientific guidance for improving cutting efficiency and surface quality in WPC machining.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Paper & Wood

Technical and Technological Factors' Effects on Quality of the Machined Surface and Energetic Efficiency When Planar Milling Heat-treated Meranti Wood

Lubomir Rajko et al.

Summary: This study investigated the factors influencing the quality of machined surface and energy consumption of heat-treated meranti wood. Results showed that rake angle, heat treatment, feed rate, and cutting speed had a significant impact on surface roughness, while the effects on energetic efficiency varied.

BIORESOURCES (2021)

添加到收藏夹

Article Forestry

Machinability of wood fiber/polyethylene composite during orthogonal cutting

Xiaolei Guo et al.

Summary: The study investigated the machinability of wood fiber/polyethylene composite material and found that the cutting depth affects the cutting efficiency and surface quality. Shallow cutting depth results in continuous cutting governed by a continuous shearing process, while deep cutting depth leads to discontinuous cutting governed by plastic fracture.

WOOD SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Forestry

Cutting power and surface quality in sawing kiln-dried, green, and frozen hem-fir wood

Vahid Nasir et al.

Summary: This study measured and compared the cutting power and waviness of hem-fir wood under different conditions, showing that feed speed had the most impact on cutting power, and the role of moisture content was nonlinear. The developed decision tree regression model accurately predicted cutting power but failed to accurately predict waviness, highlighting the importance of further understanding saw blade's dynamic behavior.

WOOD SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Automation & Control Systems

Cutting forces and cutting quality in the up-milling of solid wood using ceramic cutting tools

Xiaolei Guo et al.

Summary: The study evaluated the cutting performance of Al2O3 and Si3N4 ceramic tools in machining Manchurian ash and Chinese fir, showing that cutting force and surface roughness decreased with increasing cutting speed. Si3N4 ceramic cutting tools are more suitable for cutting solid wood, especially those with extractives, providing chemical stability and improving final product quality.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Cutting Forces in Peripheral Up-Milling of Particleboard

Bartosz Palubicki

Summary: The study introduces a novel method for processing high-frequency piezoelectric force signals to analyze single chip cutting force courses in industrial CNC milling. Results indicate that higher cutting speeds lead to higher cutting forces. The cutting thrust force in peripheral up-milling of particleboard is similar to that observed in solid wood milling.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Paper & Wood

Medium-density Fibreboard Milling Using Selected Technological Parameters

Grzegorz Pinkowski et al.

Summary: This study investigated the effect of blade type and sharpness angle on blade wear, cutting power, and surface roughness, and found that the cemented carbides cutter with the 45 degrees angle may be the optimal choice due to relatively low wear and cutting power while providing good quality of the milled surface.

BIORESOURCES (2021)

添加到收藏夹

Article Polymer Science

Preparation and Characterization of Waterborne UV Lacquer Product Modified by Zinc Oxide with Flower Shape

Yan Wu et al.

POLYMERS (2020)

添加到收藏夹

Article Construction & Building Technology

Surface quality and cutting power requirement after edge milling of thermally modified meranti (Shorea spp.) wood

Gourav Kamboj et al.

JOURNAL OF BUILDING ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Assessment of Cutting Forces and Temperature in Tapered Milling of Stone-Plastic Composite Using Response Surface Methodology

Zhaolong Zhu et al.

JOM (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Current situation and key manufacturing considerations of green furniture in China: A review

Xianqing Xiong et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Preparation and Performance of a Waterborne UV/Al Low Infrared Emissivity Coating

Xiaoxing Yan et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Manufacturing

High-quality and high-efficiency machining of stone-plastic composite with diamond helical cutters

Zhaolong Zhu et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Sanding Processes on the Surface Properties of Modified Poplar Coated by Primer Compared with Mahogany

Qingqing Liu et al.

COATINGS (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

A systematic literature review on machine tool energy consumption

Nitesh Sihag et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Engineering, Manufacturing

Cutting performance in the helical milling of stone-plastic composite with diamond tools

Zhaolong Zhu et al.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of pine impregnation and feed speed on sound level and cutting power in wood sawing

Roksana Licow et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Review Materials Science, Paper & Wood

A review on wood machining: characterization, optimization, and monitoring of the sawing process

Vahid Nasir et al.

WOOD MATERIAL SCIENCE & ENGINEERING (2020)

添加到收藏夹

Article Forestry

Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood

Vahid Nasir et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Energy Consumption Model for Drilling Processes Based on Cutting Force

Qi Wang et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

An analytical model for predicting specific cutting energy in whirling milling process

Yan He et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Materials Science, Paper & Wood

The Effect of Milling Parameters and Thermal Modification on Power Input During the Milling of Thermally Modified Spruce and Oak Wood

Miroslav Sedlecky et al.

BIORESOURCES (2019)

添加到收藏夹

Article Materials Science, Paper & Wood

Power Consumption during Edge Milling of Medium-Density Fiberboard and Edge-Glued Panel

Miroslav Sedlecky et al.

BIORESOURCES (2017)

添加到收藏夹

Article Materials Science, Paper & Wood

Cutting Power during Milling of Thermally Modified Pine Wood

Andrzej Krauss et al.

DRVNA INDUSTRIJA (2016)

添加到收藏夹

Article Engineering, Geological

Prediction of specific cutting energy in natural stone cutting processes using the neuro-fuzzy methodology

Murat Yurdakul et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)

添加到收藏夹

Article Green & Sustainable Science & Technology

Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites

Rajesh Kumar Bhushan

JOURNAL OF CLEANER PRODUCTION (2013)

添加到收藏夹

Article Automation & Control Systems

Optimization of delamination factor in drilling medium-density fiberboards (MDF) using desirability-based approach

S. Prakash et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.