☆ 4.7 Article

Mechanical behaviour of medium-grained sandstones exposed to differential cyclic loading with distinct loading and unloading rates

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Fatigue and micro-seismic behaviors of concrete disks exposed to cyclic Brazilian testing: A numerical investigation based on a 3D particle-based model

Zhengyang Song et al.

Summary: This article investigates the mechanical behavior of concrete Brazilian Disk (BD) samples under multi-level cyclic loading through numerical analysis. A particle-based 3D model is successfully established to simulate the dynamic stress-controlled cyclic testing. A generalized model based on the time-dependent evolution of bond diameter is proposed, which effectively reproduces the observed stress-strain curves and displacement fields. An acoustic emission (AE) tracking algorithm is implemented to analyze the released AE energy associated with micro fracturing, which is found to be dependent on stress levels. The numerical simulation results and failure pattern are consistent with the experimental results. The differences between cyclic compressive and cyclic Brazilian tests are discussed and summarized.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

A new multi-function servo control dynamic shear apparatus for geomechanics

Wengang Dang et al.

Summary: The DJZ-500 is a versatile servo-controlled dynamic shear test apparatus with both dynamic and static loading modules for force and displacement servo control experiments in various directions. It is capable of executing custom waveforms to study seismic response and frictional properties of geomaterials.

MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Macro-meso failure characteristics of circular cavity-contained granite under unconventional cyclic loads: A lab-scale testing

Y. Wang et al.

Summary: The cavity orientation affects the lifetime, strength, deformation, damping ratio, and failure modes of rocks, with higher cavity orientation leading to faster damage propagation and lower AE b-value, volumetric strain, and damping ratio. Shear failure is more likely to occur in rocks with high cavity orientation, highlighting the importance of cavity orientation in rock failure analysis.

MEASUREMENT (2022)

添加到收藏夹

Review Energy & Fuels

Drawing mechanisms for top coal in longwall top coal caving (LTCC): A review of two decades of literature

Jiachen Wang et al.

Summary: This review provides an overview of the research on top coal drawing mechanisms in Longwall top coal caving (LTCC) over the last two decades. Key factors such as Top coal drawbody (TCD), Top coal boundary (TCB), and Top coal recovery ratio (TCRR) are discussed, along with the classic Body-boundary-ratio (BBR) research system. The review also covers theoretical models, physical testing, numerical simulations, practical applications, and open questions for future research in LTCC.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Energy & Fuels

Influence of deep magma-induced thermal effects on the regional gas outburst risk of coal seams

Jianshe Linghu et al.

Summary: This study analyzed the evolution history of deep coal seams under magmatic activity and studied the impact of thermal effect on coal seam permeability. Results show that temperature differences at different depths lead to varying degrees of thermal stress and strain in coal seams, affecting deformation and gas outburst risk.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Energy & Fuels

Mechanical criterion for coal and gas outburst: a perspective from multiphysics coupling

Ting Liu et al.

Summary: This study investigates the mechanism of coal and gas outburst using a multiphysics coupling model, proposing a risk identification index and a critical criterion of coal instability based on force analysis. The results show the varying effects of stress, gas pressure, and coal strength on outburst risk. Factors controlling outbursts are found to interact strongly, and critical values vary based on coal seam environments. The study also classifies outburst types and suggests tailored prevention measures.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Environmental

Rock mass watering for rock-burst prevention: some thoughts on the mechanisms deduced from laboratory results

Xin Cai et al.

Summary: Water spraying or injection into rock mass is an effective method for preventing rock bursts in deeply buried hard rock engineering projects. Experimental results indicate that the presence of water significantly weakens the strength and energy storage capacity of rocks, leading to gentler failure patterns and reduced dynamicity. Additionally, a simple mechanical model was established to illustrate the local stress regulation by water penetration.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Engineering, Geological

Micromechanical-based experimental and analytical studies on rate effects and stick-slip instability of smooth quartz surfaces in the presence of plastic and non-plastic gouges

Sathwik S. Kasyap et al.

Summary: In this study, the influence of shearing rate on the tangential contact behavior of smooth flat quartz surfaces with different gouges was examined through micromechanical-based experiments. The results showed significant changes in stick-slip instability with decreasing shearing rate, as well as variations in tangential stiffness and friction behavior based on the type of gouge particles. The study provides insights into the frictional behavior of different gouges under different shearing rates and the stick-slip instability at a microscopic scale.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2021)

添加到收藏夹

Article Engineering, Mechanical

Energy dissipation and damage evolution for dynamic fracture of marble subjected to freeze-thaw and multiple level compressive fatigue loading

Y. Wang et al.

Summary: The study investigates the fatigue mechanical behaviors of marble under freeze-thaw treatment, showing that fatigue strength and strain energy decrease while irreversible volumetric deformation increases with the number of cycles. The rate of dissipated energy increases as the cyclic loading level grows. A coupling damage variable is proposed to describe rock damage evolution after freeze-thaw treatment and fatigue loading, with a damage evolution model established to fit the experimental data showing two-phase damage accumulation characteristics.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

添加到收藏夹

Article Construction & Building Technology

Fatigue characteristics of concrete subjected to indirect cyclic tensile loading: Insights from deformation behavior, acoustic emissions and ultrasonic wave propagation

Zhengyang Song et al.

Summary: This work investigated the fatigue behaviour of concrete under indirect cyclic tensile loading through laboratory tests. The study analysed the effect of loading parameters on sample deformation, acoustic emission characteristics, P-wave speed evolution, and failure patterns. Comparison between monotonic loading and cyclic loading revealed the impact of stress paths on the distribution of cracks on the surface of concrete samples at failure.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Mechanics

Macro-meso failure behavior of pre-flawed hollow-cylinder granite under multi-level cyclic loads: Insights from acoustic emission and post-test CT scanning

Y. Wang et al.

Summary: The study reveals that communication between the crack network and holes controls the volumetric deformation and final failure modes of the rock. Rock with low flaw angle shows more severe progressive crack unstable propagation. The b value of AE activities exhibits a specific pattern of increase and decrease.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Engineering, Geological

Mechanical behavior of marble exposed to freeze-thaw-fatigue loading

Zhengyang Song et al.

Summary: The test results indicate that an increase in FT cycles and fatigue load level accelerates the damage rate of marble, leading to larger axial strain rate, radial strain rate, and increasing Poisson's ratio. A warning level is defined based on the evolution of radial strain and Poisson's ratio. Advance ratio and lag ratio are effective indicators for predicting rock failure when subjected to FTF actions.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Responses of a Deeply Buried Granite Exposed to Multilevel Uniaxial and Triaxial Cyclic Stresses: Insights into Deformation Behavior, Energy Dissipation, and Hysteresis

Zhengyang Song et al.

Summary: This study investigates the mechanical responses of deeply seated granite samples through uni/triaxial cyclic tests, highlighting disparities in strain evolution and compressive strength under different loading conditions, as well as the relationships between deformation behavior, dissipated energy, and hysteresis. It also reveals quantitative correlations between strain evolution and cyclic stress levels, determines energy transformation during cyclic loading, and discusses the impacts of confining pressure level on ultimate strain, energy dissipation, and stress-strain phase shift. The mechanical responses of the granite samples subjected to different stress paths and loading strategies are summarized and explained to clarify the discrepancies in mechanical behavior encountered in distinct loading methods.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Geological

Cyclic Water Injection Potentially Mitigates Seismic Risks by Promoting Slow and Stable Slip of a Natural Fracture in Granite

Yinlin Ji et al.

Summary: The study investigates the activation of a critically stressed natural fracture in granite under pressure-controlled and volume-controlled monotonic and cyclic water injection. Results show that cyclic injection can lead to aseismic fracture slip at smaller peak slip rates compared to monotonic injection, but continued injection after an unstable shut-in stage could result in rapid and unstable fracture slip.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

添加到收藏夹

Review Engineering, Geological

A review of experimental and theoretical research on the deformation and failure behavior of rocks subjected to cyclic loading

Yi Liu et al.

Summary: This study comprehensively reviews the deformation, failure mechanism, and fatigue constitutive relationship of rocks subjected to cyclic loading over the past 60 years. It classifies cyclic tests on rocks, summarizes fatigue responses, discusses the influences of cyclic loads, outlines constitutive relationships, and suggests future research directions.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characteristics and Time-Space Evolution of Mining Stress in High Stope

Yongyue Hu et al.

Summary: This paper investigates the evolution of mining stress in high stopes of metal mines, presenting a model for stress transfer in the surrounding rock. Through on-site monitoring and numerical simulation, the study identifies three stages of pressure change and verifies the effectiveness of numerical simulation through comparison with in-site measurements.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Near-source characteristics of two-phase gas-solid outbursts in roadways

Aitao Zhou et al.

Summary: The study found that the propagation of coal and gas outbursts is significantly influenced by the geometry of roadways, with obstructions in roadways potentially causing pressure changes that affect the propagation and attenuation of outburst shock waves.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Geological

Micromechanical behaviour in shearing of reproduced flat LBS grains with strong and weak artificial bonds

S. S. Kasyap et al.

Summary: The shearing behavior of reproduced flat LBS grains bonded with different materials was studied experimentally, revealing different failure mechanisms and proposing a new mechanism for dilation. Additionally, a method for conducting cyclic shearing tests on OPC-bonded sands was introduced, and the effects of displacement amplitude and normal load on the test results were discussed.

ACTA GEOTECHNICA (2021)

添加到收藏夹

Article Engineering, Mechanical

Inhomogeneous mechanical behaviour of concrete subjected to monotonic and cyclic loading

Zhengyang Song et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Mechanical

Cyclic fatigue characteristics of strong burst-prone coal: Experimental insights from energy dissipation, hysteresis and micro-seismicity

Min Zhang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Geological

Dynamic and damage properties of artificial jointed rock samples subjected to cyclic triaxial loading at various frequencies

Qingsong Zheng et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

添加到收藏夹

Article Mechanics

Fracture behavior and damage mechanisms of sandstone subjected to wetting -drying cycles

Xin Cai et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Acoustics

Numerical Analysis of Seismic Site Effects in Loess Region of Western China under Strong Earthquake Excitations

Tuo Chen et al.

SHOCK AND VIBRATION (2020)

添加到收藏夹

Article Geochemistry & Geophysics

An Experimental Investigation on the Tribological Behaviour of Nominally Flat Quartz Grains with Gouge Material in Dry, Partial Saturated and Submersed Conditions

S. S. Kasyap et al.

PURE AND APPLIED GEOPHYSICS (2020)

添加到收藏夹

Article Engineering, Geological

Bonded-particle model-based simulation of artificial rock subjected to cyclic loading

Zhengyang Song et al.

ACTA GEOTECHNICA (2019)

添加到收藏夹

Article Construction & Building Technology

Three-dimensional particle model based numerical simulation on multi-level compressive cyclic loading of concrete

Zhengyang Song et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Energy & Fuels

Study on the relation between damage and permeability of sandstone at depth under cyclic loading

Yang Zhao et al.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Review Engineering, Geological

Cyclic and Fatigue Behaviour of Rock Materials: Review, Interpretation and Research Perspectives

B. Cerfontaine et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Engineering, Geological

Experimental Investigation on the Fatigue Mechanical Properties of Intermittently Jointed Rock Models Under Cyclic Uniaxial Compression with Different Loading Parameters

Yi Liu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Construction & Building Technology

Characteristics of dissipated energy of concrete subjected to cyclic loading

Zhengyang Song et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Hysteresis energy-based failure indicators for concrete and brittle rocks under the condition of fatigue loading

Zhengyang Song et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

添加到收藏夹

Article Engineering, Geological

Energy Dissipation-Based Method for Fatigue Life Prediction of Rock Salt

Mingming He et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Construction & Building Technology

Velocity-frequency-amplitude-dependent frictional resistance of planar joints under dynamic normal load (DNL) conditions

Wengang Dang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Geological

Strength degradation of sandstone and granodiorite under uniaxial cyclic loading

Rashid Geranmayeh Vaneghi et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental Investigation of Fracture Process Zone in Rocks Damaged Under Cyclic Loadings

M. Ghamgosar et al.

EXPERIMENTAL MECHANICS (2017)

添加到收藏夹

Article Engineering, Geological

Experimental study on seepage properties, AE characteristics and energy dissipation of coal under tiered cyclic loading

Changbao Jiang et al.

ENGINEERING GEOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Features of interrelations between acoustic quality factor and strength of rock salt during fatigue cyclic loadings

Aleksandr Sergeevich Voznesenskii et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Mechanical

Discontinuous cyclic loading tests of salt with acoustic emission monitoring

Jinyang Fan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Instruments & Instrumentation

Cyclic flattened Brazilian disc tests for measuring the tensile fatigue properties of brittle rocks

Yi Liu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2017)

添加到收藏夹

Article Engineering, Geological

Experimental and Numerical Studies on Development of Fracture Process Zone (FPZ) in Rocks under Cyclic and Static Loadings

M. Ghamgosar et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

添加到收藏夹

Article Engineering, Geological

Direct shear behavior of a plane joint under dynamic normal load (DNL) conditions

Wengang Dang et al.

ENGINEERING GEOLOGY (2016)

添加到收藏夹

Article Engineering, Mechanical

Fatigue behaviour of high-strength concrete with respect to strain and stiffness

Nadja Oneschkow

INTERNATIONAL JOURNAL OF FATIGUE (2016)

添加到收藏夹

Article Engineering, Geological

Prediction of the uniaxial compressive strength of sandstone using various modeling techniques

Danial Jahed Armaghani et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

添加到收藏夹

Article Engineering, Geological

Effects of Acoustic Emission and Energy Evolution of Rock Specimens Under the Uniaxial Cyclic Loading and Unloading Compression

Qingbin Meng et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

添加到收藏夹

Article Geochemistry & Geophysics

Experimental investigation on mechanical damage characteristics of sandstone under triaxial cyclic loading

Sheng-Qi Yang et al.

GEOPHYSICAL JOURNAL INTERNATIONAL (2015)

添加到收藏夹

Article Engineering, Geological

Effects of cyclic loading on the mechanical properties of a granite

A. Momeni et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

添加到收藏夹

Article Energy & Fuels

Drilling and borehole techniques relevant to natural gas exploration and development: A collection of published research (2009-2015)

David A. Wood

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2015)

添加到收藏夹

Article Engineering, Environmental

An adaptive neuro-fuzzy inference system for predicting unconfined compressive strength and Young's modulus: a study on Main Range granite

Danial Jahed Armaghani et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2015)

添加到收藏夹

Article Engineering, Environmental

Prediction of the unconfined compressive strength of soft rocks: a PSO-based ANN approach

Edy Tonnizam Mohamad et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2015)

添加到收藏夹

Article Engineering, Geological

General characterization of the mechanical behaviour of different volcanic rocks with respect to alteration

Antonio Pola et al.

ENGINEERING GEOLOGY (2014)

添加到收藏夹

Article Engineering, Geological

Brittleness Effect on Rock Fatigue Damage Evolution

Hamid Reza Nejati et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

添加到收藏夹

Article Engineering, Geological

Tensile Fracture Strength of Brisbane Tuff by Static and Cyclic Loading Tests

N. Erarslan et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

添加到收藏夹

Article Engineering, Geological

Damage evolution of rock salt under cyclic loading in unixial tests

Jianfeng Liu et al.

ACTA GEOTECHNICA (2014)

添加到收藏夹

Article Geosciences, Multidisciplinary

Estimation of uniaxial compressive strength based on P-wave and Schmidt hammer rebound using statistical method

Behnaz Minaeian et al.

ARABIAN JOURNAL OF GEOSCIENCES (2013)

添加到收藏夹

Article Geochemistry & Geophysics

Fatigue hydraulic fracturing by cyclic reservoir treatment enhances permeability and reduces induced seismicity

Arno Zang et al.

GEOPHYSICAL JOURNAL INTERNATIONAL (2013)

添加到收藏夹

Article Engineering, Geological

Experimental investigation of the mechanical properties of rock salt under triaxial cyclic loading

Lin-jian Ma et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)

添加到收藏夹

Article Engineering, Geological

Experimental investigation of the fatigue properties of salt rock

Ren Song et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)

添加到收藏夹

Article Engineering, Geological

Fatigue Behavior of Granite Subjected to Cyclic Loading Under Triaxial Compression Condition

Zhechao Wang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2013)

添加到收藏夹

Article Geochemistry & Geophysics

Correlating P-wave Velocity with the Physico-Mechanical Properties of Different Rocks

Manoj Khandelwal

PURE AND APPLIED GEOPHYSICS (2013)

添加到收藏夹

Article Engineering, Geological

Effects of cyclic dynamic loading on the mechanical properties of intact rock samples under confining pressure conditions

Enlong Liu et al.

ENGINEERING GEOLOGY (2012)

添加到收藏夹

Article Engineering, Civil

Mechanical properties of single-plate shear connections under monotonic, cyclic, and blast loads

Hyun Chang Yim et al.

ENGINEERING STRUCTURES (2012)

添加到收藏夹

Article Engineering, Mechanical

Mechanism of rock fatigue damage in terms of fracturing modes

N. Erarslan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2012)

添加到收藏夹

Article Engineering, Geological

Mechanical properties of Jintan mine rock salt under complex stress paths

Yintong Guo et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

P-wave velocity test for assessment of geotechnical properties of some rock materials

Saffet Yagiz

BULLETIN OF MATERIALS SCIENCE (2011)

添加到收藏夹

Article Engineering, Geological

Effects of cyclic loading on mechanical properties of Maha Sarakham salt

Kittitep Fuenkajorn et al.

ENGINEERING GEOLOGY (2010)

添加到收藏夹

Article Engineering, Geological

Fatigue damage variable and evolution of rock subjected to cyclic loading

Jian-Qing Xiao et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2010)

添加到收藏夹

Article Energy & Fuels

Correlating static properties of coal measures rocks with P-wave velocity

Manoj Khandelwal et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2009)

添加到收藏夹

Article Engineering, Geological

Inverted S-shaped model for nonlinear fatigue damage of rock

Jian-Qing Xiao et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)

添加到收藏夹

Article Engineering, Geological

Predicting the Uniaxial Compressive Strength and Static Young’s Modulus of Intact Sedimentary Rocks Using the Ultrasonic Test

Z. A. Moradian et al.

International Journal of Geomechanics (2009)

添加到收藏夹

Article Engineering, Geological

Quantifying the evolution of static elastic properties as crystalline rock approaches failure

M. J. Heap et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)

添加到收藏夹

Article Engineering, Mechanical

Comparative assessment of dissipated energy and other fatigue criteria

Alexander M. Korsunsky et al.

INTERNATIONAL JOURNAL OF FATIGUE (2007)

添加到收藏夹

Article Engineering, Geological

The relationships between effective porosity, uniaxial compressive strength and sonic velocity of intact Borrowdale Volcanic Group core samples from Sellafield

D. C. Entwisle et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2005)

添加到收藏夹

Article Engineering, Geological

Waveform effect on fatigue properties of intact sandstone in uniaxial cyclical loading

MN Bagde et al.

ROCK MECHANICS AND ROCK ENGINEERING (2005)

添加到收藏夹

Article Engineering, Geological

Fatigue properties of intact sandstone samples subjected to dynamic uniaxial cyclical loading

MN Bagde et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2005)

添加到收藏夹

Article Engineering, Geological

Characterisation of microcracks in the Bohus granite, western Sweden, caused by uniaxial cyclic loading

U Åkesson et al.

ENGINEERING GEOLOGY (2004)

添加到收藏夹

Article Engineering, Geological

Cyclic shearing and liquefaction of soil under irregular loading: an incremental model for the dynamic earthquake-induced deformation

VA Osinov

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2003)

添加到收藏夹

Article Engineering, Geological

Evaluation of shear strength of rock joints subjected to cyclic loading

MK Jafari et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2003)

添加到收藏夹

Article Engineering, Geological

Evaluation of simple methods for assessing the uniaxial compressive strength of rock

S Kahraman

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2001)

添加到收藏夹

Article Engineering, Geological

Applicability of Mohr-Coulomb and Hoek-Brown strength criteria to the dynamic strength of brittle rock

J Zhao

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.