4.5 Article

Fabrication, Characterization and Drainage Capacity of Single-Channel Porous Alumina Ceramic Membrane Tube

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Porous-foam mullite-bonded SiC-ceramic membranes for high-efficiency high-temperature particulate matter capture

Feihong Wang et al.

Summary: This study reports on the preparation of ceramic foam membranes with 3D interconnected pores and high PM filtration efficiency, achieved through direct foaming and gel-tape casting. The produced MSCMs contain large and small functional pores for efficient filtration of different particulate matters, with adjustable porosity and bending strength.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Materials Science, Ceramics

Permeating behaviour of porous SiC ceramics fabricated with different SiC particle sizes

Donghua Liu et al.

Summary: This study investigated the impact of raw particle size on permeating behaviour and pore size in porous ceramics, finding that an increase in particle size did not proportionally increase hydraulic equivalent pore size. Further measures are needed to enlarge pore size in porous ceramics to enhance permeability.

CERAMICS INTERNATIONAL (2021)

Article Biochemistry & Molecular Biology

Adsorption-Enhanced Ceramic Membrane Filtration Using Fenton Oxidation for Advanced Treatment of Refinery Wastewater: Treatment Efficiency and Membrane-Fouling Control

Haotian Mu et al.

Summary: This study combined ceramic membranes with Fenton-activated carbon adsorption for the treatment of refinery wastewater, demonstrating significantly improved removal of organic pollution and meeting local standards. Additionally, it was found that Fenton-activated carbon absorption can effectively alleviate membrane fouling.

MEMBRANES (2021)

Article Biochemistry & Molecular Biology

Enhanced Performance of Fly Ash-Based Supports for Low-Cost Ceramic Membranes with the Addition of Bauxite

Wan Fan et al.

Summary: In this study, low-cost fly ash-based ceramic supports with enhanced performance were prepared by adding bauxite. The optimized ceramic supports exhibited high pure water permeance and bending strength, and also showed excellent resistance to acid and alkali, providing a potential route for the preparation of ceramic membrane supports with characteristics of low cost and high performance.

MEMBRANES (2021)

Review Materials Science, Ceramics

Influencing factors on the performance of tubular ceramic membrane supports prepared by extrusion

Dehua Liang et al.

Summary: Inorganic ceramic membrane offers excellent performance and is applied in various fields. The preparation of support by extrusion is a common method, with factors like raw material types, particle size, extrusion parameters, pore-forming agents, and sintering temperature influencing product performance.

CERAMICS INTERNATIONAL (2021)

Article Engineering, Chemical

Numerical simulation of fluid flow and desalination effects in ceramic membrane channels

Tianhao Tang et al.

Summary: This paper establishes a hydrodynamic model of a ceramic membrane channel to study the factors influencing fluid flow and desalination efficiency, and finds that the external potential and the zeta potential of the membrane material have significant effects on the desalination process.

DESALINATION (2021)

Article Biochemistry & Molecular Biology

Hydrodynamic and Performance Evaluation of a Porous Ceramic Membrane Module Used on the Water-Oil Separation Process: An Investigation by CFD

Guilherme L. Oliveira Neto et al.

Summary: This study simulated the process of oil/water separation using ceramic membrane with Ansys Fluent software, and investigated the effects of different operating conditions on the water/oil mixture in the filtration module. It was found that increasing the feed mass flow rate significantly influenced the transmembrane pressure.

MEMBRANES (2021)

Article Materials Science, Ceramics

Customization of ZrO2 loose/tight bilayer ultrafiltration membranes by reverse micelles-mediated aqueous sol-gel process for wastewater treatment

Hang Qin et al.

Summary: Two types of spherical zirconyl oxalate aqueous sols were successfully customized using a reverse micelles-mediated aqueous sol-gel process to prepare ZrO2 loose/tight bilayer ultrafiltration membranes. The loose ultrafiltration membrane exhibited high permeability and rejection rates, while the tight ultrafiltration membrane showed controllable rejection rates for dyes and could be restored for reuse through cleaning and low-temperature calcination.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

High-strength porous alumina ceramics prepared from stable wet foams

Linying Wang et al.

Summary: In this study, porous alumina with high porosity and high strength was prepared by a popular direct foaming method using particle-stabilized wet foam. The stability of wet foams was found to increase with increasing DTAC content, while it decreased with increasing PAA content. The resulting porous alumina ceramics exhibited high porosity, fine grain size, and good compressive strength.

JOURNAL OF ADVANCED CERAMICS (2021)

Article Materials Science, Ceramics

Low-temperature sintering of a porous SiC ceramic filter using water glass and zirconia as sintering aids

Qian Jiang et al.

Summary: The study utilized water glass and zirconia as sintering aids to prepare porous SiC ceramic filters, reducing the sintering temperature and improving commercial viability. Addition of water glass and zirconia lowered the sintering temperature to 600 degrees C, resulting in high-performance ceramic filters with excellent properties.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Fabrication of high permeability SiC ceramic membrane with gradient pore structure by one-step freeze-casting process

Lijuan Huang et al.

Summary: By optimizing the preparation process, the multilayer microstructures, mechanical properties, and filtering performances of freeze-casting SiC ceramic membranes can be controlled. Increasing the solid content narrows the directional pore channels and improves mechanical properties, while increasing coarse particle content thickens separation layers and transition layers to enhance permeability efficiency.

CERAMICS INTERNATIONAL (2021)

Review Engineering, Environmental

Ceramic membrane technology for water and wastewater treatment: A critical review of performance, full-scale applications, membrane fouling and prospects

Muhammad Bilal Asif et al.

Summary: The application of ceramic membrane technology in water and wastewater treatment is rapidly growing, with its inherent advantages attracting attention and expected compound annual growth rate of 12% in the ceramic membrane market. Ceramic membranes outperform polymeric membranes in pollutant removal, fouling prevention, and cleaning efficiency.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Environmental Sciences

Recent developments in porous ceramic membranes for wastewater treatment and desalination: A review

Thanigaivelan Arumugham et al.

Summary: The development of porous ceramic membranes has provided a sustainable and efficient solution for clean water supply, particularly in wastewater treatment and desalination applications. These membranes exhibit excellent properties such as hydrophilicity, low fouling, ease of cleaning, and robust performance in harsh conditions.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Proceedings Paper Materials Science, Multidisciplinary

Permeability and dust filtration behaviour of porous SiC ceramic candle filter

Dulal Das et al.

Summary: Porous SiC candle filters were fabricated with SiC powder and additives, showing good filtration efficiency (>97%) in laboratory tests for airborne fly ash particles.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Materials Science, Ceramics

Characterization and strengthening of porous alumina-20 wt% zirconia ceramic composites

Samaneh Rezaee et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Ceramics

Highly porous SiC cellular ceramics for efficient high-temperature PM removal

Jingjing Liu et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Ceramics

Synthesis and characterization of ultrafiltration ceramic membranes used in the separation of macromolecular proteins

Amina Boulkrinat et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Low-cost ceramic membranes: A research opportunity for industrial application

S. Mestre et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Engineering, Chemical

Development of porous mullite and mullite-Al2O3 composite for microfiltration membrane applications

Mohammed Rashad et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Article Materials Science, Ceramics

Permeability of the porous Al2O3 ceramic with bimodal pore size distribution

Yanjun Li et al.

CERAMICS INTERNATIONAL (2019)

Article Materials Science, Ceramics

Preparation of γ-Al2O3 membranes for ultrafiltration by reverse micelles-mediated sol-gel process

Hang Qin et al.

CERAMICS INTERNATIONAL (2019)

Review Computer Science, Interdisciplinary Applications

CFD analysis of gas-liquid flow characteristics in a microporous tube-in-tube microchannel reactor

Wen-Ling Li et al.

COMPUTERS & FLUIDS (2018)

Article Materials Science, Ceramics

Preparation of porous ceramic membrane for gas-solid separation

Xinying Song et al.

CERAMICS INTERNATIONAL (2018)

Article Engineering, Chemical

Numerical simulation of the filtration process in fibrous filters using CFD-DEM method

Chang Yue et al.

JOURNAL OF AEROSOL SCIENCE (2016)

Article Materials Science, Ceramics

A low-cost alumina-mullite composite hollow fiber ceramic membrane fabricated via phase-inversion and sintering method

Lingling Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Article Nanoscience & Nanotechnology

Fabrication of porous SiC ceramics through a modified gelcasting and solid state sintering

Feng Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Review Engineering, Chemical

Membrane technology enhancement in oil-water separation. A review

M. Padaki et al.

DESALINATION (2015)