☆ 4.7 Article

Triple Passivation Approach to Laminate Perovskite Layers for Augmented UV and Ambient Stable Photovoltaics

ACS APPLIED ENERGY MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Stability enhancement of perovskite solar cells via multi-point ultraviolet-curing-based protection

Ruoshui Li et al.

Summary: This paper introduces a method to enhance the stability of organometal halide perovskite solar cells (PSCs) using UV-curing. By adding a suitable amount of UV-gel in the perovskite precursor solution and hole transport material solution, the crystallization of perovskite can be promoted, moisture diffusion in the hole transport layer can be reduced, and the degradation of PSCs can be avoided.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Physical

Ambient Stable Perovskite Solar Cells through Trifluoro Acetic Acid-Mediated Multifunctional Anchoring

Ritesh Kant Gupta et al.

Summary: This study demonstrates the use of trifluoro acetic acid (TFAA) as an additive to improve the efficiency and stability of hybrid perovskite solar cells (PSCs). TFAA interacts with perovskites to passivate defect states, resulting in enhanced device performance. Various experimental techniques were used to confirm the improvement in efficiency and stability.

ACS APPLIED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tautomeric Molecule Acts as a Sunscreen for Metal Halide Perovskite Solar Cells

Yang Wang et al.

Summary: Applying a sunscreen molecule onto perovskite solar cells enhances their UV endurance and passivates defects by molecular tautomerism, significantly improving device efficiency. The sunscreen strategy enables long-term UV stability for perovskite solar cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Applied

Evaporated potassium chloride for double-sided interfacial passivation in inverted planar perovskite solar cells

Shasha Zhang et al.

Summary: A simple and efficient double-sided interfacial passivation method DIP-KCl is reported, which can effectively reduce defects in perovskite solar cells and improve performance, leading to increased efficiency and stability.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Surface Fluorination of TiO2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet-Light Stability

Wanpei Hu et al.

Summary: By in situ fluorination, TiO2 nanocrystals can increase electron mobility, decrease trap state density, and inhibit photocatalytic activity; utilizing fluorinated TiO2 as ETL enables high efficiency and stability of perovskite solar cells.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Additive-Assisted Defect Passivation for Minimization of Open-Circuit Voltage Loss and Improved Perovskite Solar Cell Performance

Mohammad Adil Afroz et al.

Summary: Passivation of trap states using multiple carboxylic acid-functionalized small aromatic molecules improves the performance and stability of perovskite solar cells. Devices incorporating BTCA exhibit the highest power conversion efficiency and open-circuit voltage, along with enhanced thermal stability.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Introducing Intermolecular Cation-π Interactions for Water-Stable Low Dimensional Hybrid Lead Halide Perovskites

Tariq Sheikh et al.

Summary: The study introduces long-range cation-pi interactions to stabilize hybrid lead halide perovskites in water, achieving complete stability after six months of continuous water treatment without the need for encapsulation. Experimental methods reveal the potential applications of cation-pi interactions in designing more water-stable low-dimensional hybrid perovskite compositions.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Physical

Conjugated Polyelectrolyte-Passivated Stable Perovskite Solar Cells for Efficiency Beyond 20%

Rabindranath Garai et al.

Summary: In this study, the novel conjugated polyelectrolyte PHIA was investigated for perovskite passivation, resulting in significantly reduced trap states, lesser recombination, and a high power conversion efficiency of 20.17%. The passivation approach also improved long-term device stability, with a large-area device demonstrating potential for future commercialization.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Halide Engineering for Mitigating Ion Migration and Defect States in Hot-Cast Perovskite Solar Cells

Ritesh Kant Gupta et al.

Summary: Controlling the morphology of perovskite to achieve large-sized grains with small-width grain boundaries is crucial for high photovoltaic performance. The incorporation of MABr into mixed halide perovskite effectively minimizes ion migration and results in high-quality films with large grains. The addition of MABr improved the power conversion efficiency of the perovskite solar cells, with the 0.1MABr ratio showing the best performance.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Double-layer CsI intercalation into an MAPbI3 framework for efficient and stable perovskite solar cells

LiangLe Wang et al.

Summary: The study successfully fabricated high-quality cesium-containing perovskite films using a sequential deposition process, and the addition of a double layer CsI greatly altered the perovskite morphology to achieve higher power conversion efficiencies.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailoring Trap Density of States through Impedance Analysis for Flexible Organic Field-Effect Transistors

Anwesha Choudhury et al.

Summary: The choice of dielectric material significantly impacts device performance by influencing the D/S interface. Investigating trap density of states at the interface using impedance spectroscopy validates its potential as a DOS analysis method for OFET applications. Fabricating the device on a flexible substrate and testing its mechanical stability confirms its practical utility for developing flexible electronic circuit components.

ADVANCED MATERIALS INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Dual-Passivation Strategy for Improved Ambient Stability of Perovskite Solar Cells

Ritesh Kant Gupta et al.

Summary: Dual-passivation of MAPbI(3)-based perovskite using PTSA in the bulk and hydrophobic PS at the surface significantly reduces trap-density, improves device performance, and enhances PCE. The dual-passivation improves perovskite crystallinity, grain size, and reduces trap-density, resulting in higher photogenerated charges and better charge transport. The modified device retains 93% of the original PCE after 1000 hours under ambient conditions.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Surface recrystallized stable 2D-3D graded perovskite solar cells for efficiency beyond 21%

Rabindranath Garai et al.

Summary: Organic-inorganic hybrid perovskite solar cells have seen rapid efficiency improvements recently, but their commercialization is hindered by instability towards ambient conditions. The formation of a thin layer of 2D perovskite over a 3D structure has enhanced stability and efficiency. Surface treatment with a strategically synthesized multifunctional molecule has led to outstanding efficiencies and improved ambient stability for perovskite solar cells.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancing the efficiency and ambient stability of perovskite solar cells via a multifunctional trap passivation molecule

Maimur Hossain et al.

Summary: A study identified an improvement method for perovskite solar cells, where adding a cancer drug as a passivation agent significantly increased the efficiency and long-term stability of the cells.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fluoroarene derivative based passivation of perovskite solar cells exhibiting excellent ambient and thermo-stability achieving efficiency >20%

Maimur Hossain et al.

Summary: Fluoroaromatic amine additives were used to passivate hybrid perovskite solar cells, significantly enhancing their stability and efficiency. Among these additives, PFA showed the most remarkable improvement in both moisture and thermo-stability of the devices.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Passivation and process engineering approaches of halide perovskite films for high efficiency and stability perovskite solar cells

Abd. Rashid bin Mohd Yusoff et al.

Summary: The surface, interfaces, and grain boundaries of halide perovskite films play critical roles in achieving and maintaining high solar cell performance. Various defect engineering approaches are utilized to improve the efficiency and stability of perovskite solar cells, with a focus on passivating materials and process engineering techniques.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance Ambient-Condition-Processed Polymer Solar Cells and Organic Thin-Film Transistors

Rabindranath Garai et al.

ACS OMEGA (2020)

添加到收藏夹

Article Chemistry, Physical

Luminescent europium-doped titania for efficiency and UV-stability enhancement of planar perovskite solar cells

Peng Chen et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Overcoming Redox Reactions at Perovskite-Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Caleb C. Boyd et al.

JOULE (2020)

添加到收藏夹

Article Energy & Fuels

Decoupling Contributions of Charge-Transport Interlayers to Light-Induced Degradation of p-i-n Perovskite Solar Cells

Mohamed Elnaggar et al.

SOLAR RRL (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Efficient Trap Passivation of MAPbI3 via Multifunctional Anchoring for High-Performance and Stable Perovskite Solar Cells

Rabindranath Garai et al.

ADVANCED SUSTAINABLE SYSTEMS (2020)

添加到收藏夹

Article Chemistry, Physical

Low-temperature processed rare-earth doped brookite TiO2 scaffold for UV stable, hysteresis-free and high-performance perovskite solar cells

Qiyao Guo et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Defects Healing in Two-Step Deposited Perovskite Solar Cells via Formamidinium Iodide Compensation

Chenguang Xin et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Thermal Stability and Performance Enhancement of Perovskite Solar Cells Through Oxalic Acid-Induced Perovskite Formation

Mohammad Adil Afroz et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Regulating active layer thickness and morphology for high performance hot-casted polymer solar cells

Ritesh Kant Gupta et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

添加到收藏夹

Article Chemistry, Physical

Trap-State Passivation by Nonvolatile Small Molecules with Carboxylic Acid Groups for Efficient Planar Perovskite Solar Cells

Lin Guan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films

Qiu-Ming Hong et al.

ORGANIC ELECTRONICS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Perovskite Bifunctional Device with Improved Electroluminescent and Photovoltaic Performance through Interfacial Energy-Band Engineering

Jiangsheng Xie et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Energy & Fuels

Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation

Yan Jiang et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Physics, Applied

In situ surface modification of TiO2 by CaTiO3 to improve the UV stability and power conversion efficiency of perovskite solar cells

Gang Liu et al.

APPLIED PHYSICS LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crystallization and grain growth regulation through Lewis acid-base adduct formation in hot cast perovskite-based solar cells

Mohammad Adil Afroz et al.

ORGANIC ELECTRONICS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Perovskite Photovoltaics: The Significant Role of Ligands in Film Formation, Passivation, and Stability

Hong Zhang et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

A Review of Perovskites Solar Cell Stability

Rui Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells

Rui Wang et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

A promising europium-based down conversion material: organic-inorganic perovskite solar cells with high photovoltaic performance and UV-light stability

Naveed Ur Rahman et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Review Energy & Fuels

Review of Novel Passivation Techniques for Efficient and Stable Perovskite Solar Cells

Jincheol Kim et al.

SOLAR RRL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient and ultraviolet durable planar perovskite solar cells via a ferrocenecarboxylic acid modified nickel oxide hole transport layer

Jiankai Zhang et al.

NANOSCALE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Accelerated electron extraction and improved UV stability of TiO2 based perovskite solar cells by SnO2 based surface passivation

Fang Wan et al.

ORGANIC ELECTRONICS (2018)

添加到收藏夹

Article Chemistry, Physical

A Ga-doped SnO2 mesoporous contact for UV stable highly efficient perovskite solar cells

Bart Roose et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent Progress on the Long-Term Stability of Perovskite Solar Cells

Qingxia Fu et al.

ADVANCED SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Improving Efficiency and Light Stability of Perovskite Solar Cells by Incorporating YVO4:Eu3+, Bi3+ Nanophosphor into the Mesoporous TiO2 Layer

Junjie Jin et al.

ACS APPLIED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of Photogenerated Dipoles in the Hole Transport Layer on Photovoltaic Performance of Organic-Inorganic Perovskite Solar Cells

Mahshid Ahmadi et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Unraveling the Light-Induced Degradation Mechanisms of CH3NH3PbI3 Perovskite Films

Norbert H. Nickel et al.

ADVANCED ELECTRONIC MATERIALS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers

Federico Bella et al.

SCIENCE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

UV Degradation and Recovery of Perovskite Solar Cells

Sang-Won Lee et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Physical

Free-standing flexible carbon electrode for highly efficient hole-conductor-free perovskite solar cells

Huiyun Wei et al.

CARBON (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Under the spotlight: The organic-inorganic hybrid halide perovskite for optoelectronic applications

Qi Chen et al.

NANO TODAY (2015)

添加到收藏夹

Article Multidisciplinary Sciences

High-efficiency solution-processed perovskite solar cells with millimeter-scale grains

Wanyi Nie et al.

SCIENCE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3

Guichuan Xing et al.

SCIENCE (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.