4.8 Review

Recognizing the long-term impacts of plastic particles for preventing distortion in decision-making

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Polymer Science

Biodegradability of poly(3-hydroxyalkanoate) and poly(ε-caprolactone) via biological carbon cycles in marine environments

Miwa Suzuki et al.

Summary: Approximately 4.8-12.7 million tons of plastic waste enters marine environments annually via wind and river currents. The Ellen MacArthur Foundation warns that if the current rate of plastic environmental runoff continues, the total weight of plastic waste in the oceans will surpass the total weight of fish by 2050. Therefore, biodegradable plastics like PHAs and PCL are gaining attention due to their excellent marine biodegradability.

POLYMER JOURNAL (2021)

Article Green & Sustainable Science & Technology

Life cycle assessment of plastic grocery bags and their alternatives in cities with con fi ned waste management structure: A Singapore case study

Ashiq Ahamed et al.

Summary: The study evaluated the life cycle of single-use and reusable grocery bags, determining that reusable polypropylene non-woven bags had the least negative environmental impacts.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Environmental Sciences

In vitro toxicity from a physical perspective of polyethylene microplastics based on statistical curvature change analysis

Daheui Choi et al.

Summary: Microplastics, which decompose into small fragments under external stress, are posing a significant threat to the environment. This study demonstrates the in vitro toxicity of microplastics with two different shapes, showing that higher concentration and rough structure can lead to toxicity towards cells. The statistical analysis confirms that irregular-shaped microplastics may adversely affect cells and potentially pose a risk to human health in the real environment.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Review Environmental Sciences

Linking LCA literature with circular economy value creation: A review on beverage packaging

Ilija Sazdovski et al.

Summary: The paper reviewed and analyzed the relationship between circular economy and packaging waste, and provided recommendations for enhancing future scientific LCA development practices, such as considering all direct and indirect factors, simulating recycling scenarios to improve accuracy of recycling rate assessments, etc.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Environmental Sciences

Microplastics can act as vector of the biocide triclosan exerting damage to freshwater microalgae

Irene Verdu et al.

Summary: This study evaluated the potential of various types of microplastics as carriers for the antimicrobial triclosan, with polyamide, polyoxymethylene, and low-density polyethylene showing the highest sorption capacities for TCS. The chemical analyses demonstrated significant impacts on growth and chlorophyll a content of Anabaena when exposed to TCS-loaded microplastics, revealing their role as potential vectors of TCS towards freshwater microalgae.

CHEMOSPHERE (2021)

Article Environmental Sciences

Plastic (PET) vs bioplastic (PLA) or refillable aluminium bottles - What is the most sustainable choice for drinking water? A life-cycle (LCA) analysis

Elena Tamburini et al.

Summary: Life cycle analysis (LCA) is a critical tool for evaluating the environmental impact of both petro-plastics and bioplastics, providing insights into the overall impact of a product or process on the environment. This study conducted LCA on three scenarios of bottled drinking water, showing that PET bottles have the lowest environmental impact, while PLA bottles are burdened by the agricultural phase for corn cultivation, and aluminum bottles need to consider the impact of washing.

ENVIRONMENTAL RESEARCH (2021)

Editorial Material Engineering, Environmental

The Global Plastic Toxicity Debt

Matthias C. Rillig et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Engineering, Environmental

Environmental fate, ecotoxicity biomarkers, and potential health effects of micro- and nano-scale plastic contamination

Prabhat Kumar Rai et al.

Summary: This comprehensive review discusses the physical and chemical characteristics of microplastics and nanoplastics, as well as their impact on the environment in terms of fate, microbial ecology, transport, and ecotoxic behavior. It also analyzes the mechanisms and risks of their hazards to the environment and human health. The direction for future interdisciplinary research in materials and polymer science to control the pollution caused by micro- and nanoplastics is also addressed.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Enhanced reproductive toxicities induced by phthalates contaminated microplastics in male mice (Mus musculus)

Yongfeng Deng et al.

Summary: The study found that contaminated microplastics can transport phthalate esters into the tissues of mice, leading to increased reproductive toxicity. The accumulation of microplastics primarily occurs in the gut and liver, impacting sperm physiology and spermatogenesis.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Environmental Sciences

From nanoplastic to microplastic: A bibliometric analysis on the presence of plastic particles in the environment

Rachel M. Sorensen et al.

Summary: Identifying the leading publications, authors, and countries in microplastic and nanoplastic research is crucial for regulatory decisions, standardized research methodology, and solidifying definitions. Analyzing publication trends revealed that the USA and China are top publishing countries, but top publishing institutions are located outside of these countries.

MARINE POLLUTION BULLETIN (2021)

Review Environmental Sciences

Potential human health risks due to environmental exposure to nano-and microplastics and knowledge gaps: A scoping review

Arifur Rahman et al.

Summary: Microplastics are an emerging global environmental contaminant that may have negative impacts on human health through various pathways such as metabolic disturbances, neurotoxicity, and increased cancer risk. Currently, little is known about the effects of microplastics on human health, and further research is needed to quantify their impacts and pathogenesis.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Environmental Sciences

Occurrence and transport of microplastics sampled within and above the planetary boundary layer

Miguel Gonzalez-Pleiter et al.

Summary: This study investigated the presence and characteristics of microplastics (MPs) in the atmosphere using aircraft sampling campaigns, revealing the presence of MPs in different regions and concentrations with potential long-range transport capabilities.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Environmental

Plastic recycling in a circular economy; determining environmental performance through an LCA matrix model approach

A. E. Schwarz et al.

Summary: Insights into environmental impacts of recycling and optimal recycling choices for specific plastic polymers are crucial for ensuring a circular economy for plastics. A life cycle assessment 'matrix' model was used to evaluate the environmental performance of 10 recycling technologies for the top 25 produced polymers in Europe, showing varying results depending on the polymer type. The model suggests that recycling the most demanded polymers in Europe could reduce CO2 emissions from plastics significantly.

WASTE MANAGEMENT (2021)

Review Green & Sustainable Science & Technology

Circular economy in manufacturing companies: A review of case study literature

Marit Moe Bjornbet et al.

Summary: The concept of circular economy in the manufacturing industry has progressed beyond conceptual development to empirical studies and implementation tools. However, existing research tends to focus on the environmental dimension of circular economy practices, neglecting the social and economic dimensions. Narrow approaches to sustainability in manufacturing pose a risk of circular economy implementation efforts failing to provide socially, environmentally, and economically beneficial solutions.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Nanoscience & Nanotechnology

Placing nanoplastics in the context of global plastic pollution

Denise M. Mitrano et al.

Summary: Plastic pollution is undeniable and the emergence of nanoplastics has raised concerns about their widespread distribution and potential hazards. Despite limited measurements of nanoplastics in the environment, there is a growing unease over the uncertainties surrounding their pervasiveness and potential risks.

NATURE NANOTECHNOLOGY (2021)

Review Environmental Sciences

Solid waste: An overlooked source of microplastics to the environment

Harmita Golwala et al.

Summary: Microplastics pollution is a pressing environmental issue, with solid waste being the main source of microplastics entering aquatic environments. Waste sources related to microplastics include landfill refuse, sludge, and food waste.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Review Multidisciplinary Sciences

Plastic ingestion by freshwater turtles: a review and call to action

Adam G. Clause et al.

Summary: Plastic pollution, especially plastic ingestion by animals, is a serious global issue. Research shows that while plastic ingestion is well-documented in marine turtles, it is relatively understudied in non-marine turtle species. Studies have found that freshwater turtles also face plastic ingestion, with some results potentially inflated due to plastic-resembling organic material. Recommendations include using non-native turtles as proxies for understanding plastic ingestion in native turtles.

SCIENTIFIC REPORTS (2021)

Review Chemistry, Multidisciplinary

LCA Practices of Plastics and Their Recycling: A Critical Review

Timothy M. Kousemaker et al.

Summary: Life cycle assessment (LCA) applications have grown in popularity in recent years, however, there is a need to broaden system boundaries through dynamic modeling methods to bridge the gap with policy-making.

APPLIED SCIENCES-BASEL (2021)

Review Polymer Science

Environmental Microplastic Particles vs. Engineered Plastic Microparticles-A Comparative Review

Simone Kefer et al.

Summary: Researchers have highlighted the novel threat that microplastic particles pose to nature, emphasizing the importance of using samples that resemble those found in the environment for research. This review addresses different categories of microplastic particles and provides an overview of common separation and analysis methods used for environmental MPs.

POLYMERS (2021)

Article Biochemistry & Molecular Biology

How Vine Shoots as Fillers Impact the Biodegradation of PHBV-Based Composites

Gregoire David et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)

Article Chemistry, Multidisciplinary

Degradation Rates of Plastics in the Environment

Ali Chamas et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Sustainability Assessment of a Single-Use Plastics Ban

Timo Herberz et al.

SUSTAINABILITY (2020)

Article Environmental Sciences

Influence of microplastics on nutrients and metal concentrations in river sediments

Beibei He et al.

ENVIRONMENTAL POLLUTION (2020)

Review Agronomy

Environmental Sustainability of Plastic in Agriculture

Chrysanthos Maraveas

AGRICULTURE-BASEL (2020)

Article Multidisciplinary Sciences

Plastic rain in protected areas of the United States

Janice Brahney et al.

SCIENCE (2020)

Editorial Material Multidisciplinary Sciences

Microplastic in terrestrial ecosystems

Matthias C. Rillig et al.

SCIENCE (2020)

Article Engineering, Environmental

Dynamic Material Flow Analysis of PET, PE, and PP Flows in Europe: Evaluation of the Potential for Circular Economy

Marie Kampmann Eriksen et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Green & Sustainable Science & Technology

Comparative life cycle assessment of drinking straws in Brazil

Guilherme Marcelo Zanghelini et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Towards better representation of organic agriculture in life cycle assessment

Hayo M. G. van der Werf et al.

NATURE SUSTAINABILITY (2020)

Article Ecology

The Circular Economy: Swings and Roundabouts?

Neal Millar et al.

ECOLOGICAL ECONOMICS (2019)

Article Environmental Sciences

Strategies to reduce the global carbon footprint of plastics

Jiajia Zheng et al.

NATURE CLIMATE CHANGE (2019)

Article Engineering, Environmental

Human Consumption of Microplastics

Kieran D. Cox et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Engineering, Environmental

The Plastic Cycle: A Novel and Holistic Paradigm for the Anthropocene

Michael S. Bank et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Engineering, Environmental

Plastic Teabags Release Billions of Microparticles and Nanoparticles into Tea

Laura M. Hernandez et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Engineering, Environmental

Benchmarking the in Vitro Toxicity and Chemical Composition of Plastic Consumer Products

Lisa Zimmermann et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Multidisciplinary Sciences

White and wonderful? Microplastics prevail in snow from the Alps to the Arctic

Melanie Bergmann et al.

SCIENCE ADVANCES (2019)

Article Environmental Sciences

Nano-plastics induce aquatic particulate organic matter (microgels) formation

Ruei-Feng Shiu et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Review Engineering, Environmental

Emergence of Nanoplastic in the Environment and Possible Impact on Human Health

Roman Lehner et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Green & Sustainable Science & Technology

Environmental sustainability for highways operation: Comparative analysis of plastic and steel screen anti-glare systems

Edivan Cherubini et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Review Engineering, Environmental

Towards sustainable development through the circular economy-A review and critical assessment on current circularity metrics

Blanca Corona et al.

RESOURCES CONSERVATION AND RECYCLING (2019)

Article Environmental Sciences

Tire Abrasion as a Major Source of Microplastics in the Environment

Frank Sommer et al.

AEROSOL AND AIR QUALITY RESEARCH (2018)

Article Green & Sustainable Science & Technology

Circular economy as an essentially contested concept

Jouni Korhonen et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Editorial Material Engineering, Environmental

ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level

Mark A. J. Huijbregts et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2017)

Review Engineering, Environmental

Reducing Uncertainty and Confronting Ignorance about the Possible Impacts of Weathering Plastic in the Marine Environment

Annika Jahnke et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS (2017)

Article Engineering, Environmental

The ecoinvent database version 3 (part I): overview and methodology

Gregor Wernet et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2016)

Article Engineering, Environmental

Challenge clusters facing LCA in environmental decision-making-what we can learn from biofuels

Marcelle C. McManus et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2015)

Review Green & Sustainable Science & Technology

Monetary valuation in Life Cycle Assessment: a review

Massimo Pizzol et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Article Environmental Sciences

Environmental and health hazard ranking and assessment of plastic polymers based on chemical composition

Delilah Lithner et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2011)