4.8 Review

Interfaces in all solid state Li-metal batteries: A review on instabilities, stabilization strategies, and scalability

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Interplay of Lithium Intercalation and Plating on a Single Graphite Particle

Tao Gao et al.

Summary: Improving safety, increasing charging rates, and extending the lifetime of lithium-ion batteries is a major challenge, with the key being to control lithium plating on graphite anodes. Experimental studies have shown that the onset of plating is strongly coupled with phase separation in graphite, occurring only on the fully lithiated edges of particles. The competition between Li insertion and plating is further elucidated through energetics and kinetics analysis.
Article Chemistry, Physical

Recent advances in organic-inorganic composite solid electrolytes for all-solid-state lithium batteries

Zhiwei Cheng et al.

Summary: All-solid-state lithium batteries (ASSLBs) are expected to replace traditional lithium-ion batteries with their excellent safety and energy density; Organic-inorganic composite solid electrolytes (O-ICSEs) show great potential in promoting commercialization by balancing electrochemical and mechanical properties; Recent research progress on O-ICSEs based on polyethylene oxide (PEO), polyacrylonitrile (PAN) and polycarbonate matrix has focused on fillers types, structural designs and performance parameters.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Linking void and interphase evolution to electrochemistry in solid-state batteries using operando X-ray tomography

John A. Lewis et al.

Summary: The study using operando synchrotron X-ray computed microtomography reveals the evolution of lithium/solid-state electrolyte interfaces during battery cycling, showing how void formation, interphase growth, and volumetric changes affect cell behavior. Loss of contact at the interface between lithium and the solid-state electrolyte is found to be the primary cause of cell failure, while redox-active interphase and global volume changes upon charge also play significant roles in determining cell performance. These findings provide insights into the impact of chemo-mechanical phenomena on cell behavior, aiding in the development of solid-state batteries.

NATURE MATERIALS (2021)

Article Chemistry, Multidisciplinary

Rapid Synthesis and Sintering of Metals from Powders

Chengwei Wang et al.

Summary: Powder to bulk processing techniques like additive manufacturing and metal injection molding have revolutionized complex metal design and manufacturing. However, they often face challenges like residue stress and slow sintering processes. The ultrafast high-temperature sintering process offers a quick solution for synthesizing and sintering bulk metals and alloys, allowing for rapid screening and development of new metal compositions and structures.

ADVANCED SCIENCE (2021)

Article Multidisciplinary Sciences

A mechanistic investigation of the Li10GeP2S12|LiNi1-x-yCoxMnyO2 interface stability in all-solid-state lithium batteries

Tong-Tong Zuo et al.

Summary: Researchers investigated the degradation mechanisms at the LGPS/NCM622 interface and found that electronic transport limits the growth of the degradation layer at the electrode|electrolyte interface. Additionally, they demonstrated the presence of two oxidation mechanisms at medium (3.7 V vs. Li+/Li < E < 4.2 V vs. Li+/Li) and high (E > = 4.2 V vs. Li+/Li) potentials.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Growth of lithium-indium dendrites in all-solid-state lithium-based batteries with sulfide electrolytes

Shuting Luo et al.

Summary: This study investigates the growth of Li-In dendritic structures in all-solid-state lithium-based batteries and the resulting short circuits, highlighting the differences between Li-In dendrites and lithium dendrites, as well as discussing the instability of Li-In electrodes towards sulfide solid electrolytes.

NATURE COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

Temperature Dependence of Lithium Anode Voiding in Argyrodite Solid-State Batteries

Dominic Spencer Jolly et al.

Summary: It has been found that void formation at the Li/Li6PS5Cl interface can be reduced at elevated temperatures, leading to an increase in critical current and stable cycling. However, the charge-transfer resistance at the Li/Li6PS5Cl interface is pressure and temperature dependent, posing challenges for the implementation of solid-state cells with Li anodes.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Challenges and Opportunities for Fast Charging of Solid-State Lithium Metal Batteries

Bairav S. Vishnugopi et al.

Summary: Solid-state batteries (SSBs) show promise for fast-charging, but face challenges such as electro-chemo-mechanics interaction, interface evolution, and transport-kinetics dichotomy. Critical features like plating-stripping crosstalk, metallic filament growth, cathode microstructure, and interphase formation impact the fast-charge performance of SSBs. Modulating intrinsic and extrinsic design factors can favorably influence the mechanistic coupling and cross-correlations towards achieving fast-charge in SSBs.

ACS ENERGY LETTERS (2021)

Review Chemistry, Physical

A Review of Existing and Emerging Methods for Lithium Detection and Characterization in Li-Ion and Li-Metal Batteries

Partha P. Paul et al.

Summary: This review discusses various approaches used to detect and characterize the formation of Li in batteries, each technique has its unique advantages and limitations towards solving part of the puzzle of battery degradation. Multimodal characterization holds promise for addressing concerns in the implementation of the next generation of batteries in the transportation sector.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Tracking lithium penetration in solid electrolytes in 3D by in-situ synchrotron X-ray computed tomography

Shuai Hao et al.

Summary: Solid state batteries have a critical barrier to commercialization due to lithium penetration through the solid electrolyte, which is not yet fully understood. This study tracked the 3D morphological evolution of cracks with deposited lithium and found that lithium only partially filled the cracks.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

Bifunctional In Situ Polymerized Interface for Stable LAGP-Based Lithium Metal Batteries

Shengnan Zhang et al.

Summary: In this study, a bifunctional PVCA-based buffer layer was introduced to enhance the interface compatibility and stability of the NASICON-type LAGP electrolyte in ASSLMBs. The improved contact between LAGP and electrodes and the enhanced stability of LAGP enabled the ASSLMBs to exhibit excellent electrochemical performance, with low overpotential and superior cyclic stability.

ADVANCED MATERIALS INTERFACES (2021)

Review Electrochemistry

Electrochemical Impedance Spectroscopy for All-Solid-State Batteries: Theory, Methods and Future Outlook

Pooja Vadhva et al.

Summary: This review summarizes the current knowledge of electrochemical impedance spectroscopy in the context of solid-state electrolytes and batteries, with an emphasis on experimental and modeling best practices, as well as emerging impedance methods for conventional lithium-ion batteries as a guide for opportunities in the solid-state battery field.

CHEMELECTROCHEM (2021)

Review Energy & Fuels

Current Trends in Nanoscale Interfacial Electrode Engineering for Sulfide-Based All-Solid-State Li-Ion Batteries

Mukarram Ali et al.

Summary: The all-solid-state Li-ion batteries (ASSLBs) have attracted attention for energy storage technologies in the past two decades. The sulfide-based solid electrolytes (SSEs) are considered the most promising electrolytes for practical ASSLBs due to their high ionic conductivity and potential for high energy density cells. However, SSEs face challenges such as low electrochemical stability and dendritic growth. This review focuses on nanoscale interfacial engineering for oxide-based cathode materials and Li-metal anodes, discussing recent advancements in complex interfacial coatings and lithiophilic seeding.

ENERGY TECHNOLOGY (2021)

Article Energy & Fuels

High Energy Density and Stable Three-Dimensionally Structured Se-Loaded Bicontinuous Porous Carbon Battery Electrodes

Junjie Wang et al.

Summary: 3D-structured Se-loaded bicontinuous porous carbon (BPC) electrodes are fabricated by colloidal templating of BPC followed by pulsed-voltage Se electrodeposition, delivering a specific capacity of 665 mAh g(-1) at 0.1 C rate. The utilization of vinylene carbonate (VC) containing electrolyte results in minimal capacity fade over 500 cycles at 1 C rate, possibly due to the formation of a stable solid electrolyte interface (SEI). Additionally, the rate performance of the 3D Se/BPC electrodes is good, with a deliverable capacity of about 300 mAh g(-1) at rates as high as 5 C.

ENERGY TECHNOLOGY (2021)

Review Chemistry, Multidisciplinary

Physical Vapor Deposition in Solid-State Battery Development: From Materials to Devices

Sandra Lobe et al.

Summary: This review discusses the contribution of physical vapor deposition (PVD) processes to the development of electrochemical energy storage systems with emphasis on solid-state batteries. It provides an overview of PVD technologies and highlights the utility of PVD for the fabrication and characterization of individual battery materials. Key methods for the fabrication of solid electrolytes and active electrode materials with well-defined properties are described, demonstrating how these techniques facilitate the understanding of fundamental material properties and interfacial phenomena as well as the development of new materials.

ADVANCED SCIENCE (2021)

Editorial Material Chemistry, Physical

Challenges for and Pathways toward Li-MetalBased All-Solid-State Batteries

Paul Albertus et al.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Fabrication of High-Quality Thin Solid-State Electrolyte Films Assisted by Machine Learning

Yu-Ting Chen et al.

Summary: This study utilizes machine learning to evaluate solid-state electrolyte (SSE) films based on uniformity and ionic conductivity, presenting an efficient approach to optimize scalable production of high-quality SSE films.

ACS ENERGY LETTERS (2021)

Article Energy & Fuels

Semi-solid alkali metal electrodes enabling high critical current densities in solid electrolyte batteries

Richard J. -Y. Park et al.

Summary: The critical current densities of pure metals in the Li-Na-K system scale inversely to mechanical deformation resistance. Two electrode architectures with a liquid phase have been demonstrated to enable high current densities while maintaining the advantages of solid electrodes.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

Smart Construction of an Intimate Lithium | Garnet Interface for All-Solid-State Batteries by Tuning the Tension of Molten Lithium

Mingjie Du et al.

Summary: Garnet electrolytes show great promise in all-solid-state lithium batteries, but poor contact with Li-metal anodes remains a major challenge.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Three-dimensional alloy interface between Li6.4La3Zr1.4Ta0.6O12 and Li metal to achieve excellent cycling stability of all-solid-state battery

Zipei Wan et al.

Summary: The study demonstrates that by magnetron sputtering a three-dimensional (3D) porous zinc layer on the surface of LLZTO, a three-dimensional Li-Zn alloy layer can be constructed to effectively reduce the impedance at the LLZTO/Li interface, promote uniform distribution of Li ions, and inhibit the growth of Li dendrites, thereby enhancing the stability of all-solid-state lithium metal batteries.

JOURNAL OF POWER SOURCES (2021)

Article Multidisciplinary Sciences

Operando optical tracking of single-particle ion dynamics in batteries

Alice J. Merryweather et al.

Summary: The key to advancing lithium-ion battery technology, especially fast charging, lies in understanding dynamic processes in functioning materials under realistic conditions in real time. A laboratory-based optical interferometric scattering microscope was introduced to study nanoscopic lithium-ion dynamics in battery materials, allowing for high-throughput material screening. This methodology was applied to study various processes in battery materials, providing insights into battery degradation mechanisms.

NATURE (2021)

Article Chemistry, Physical

Improving Contact Impedance via Electrochemical Pulses Applied to Lithium-Solid Electrolyte Interface in Solid-State Batteries

Anand Parejiya et al.

Summary: The study demonstrates that a facile electrochemical pulse technique can improve the interfacial impedance and contact in SSBs, leading to higher energy density batteries. The application of short duration, high-voltage pulses can lower contact impedance and enhance contact between Li and LALZO through local Joule heating. The pulse technique shows potential to significantly reduce charge-transfer resistance and improve interfacial contacts in solid-state battery configurations.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Rate Limitations in Composite Solid-State Battery Electrodes: Revealing Heterogeneity with Operando Microscopy

Andrew L. Davis et al.

Summary: The study found that the rate capability of composite electrodes in solid-state batteries is often limited, with factors including electrostatic potential and solid-state diffusion. Model systems of graphite/Li6PS5Cl composite electrodes can help researchers understand these limiting factors.

ACS ENERGY LETTERS (2021)

Review Chemistry, Physical

Transitioning solid-state batteries from lab to market: Linking electro-chemo-mechanics with practical considerations

Michael J. Wang et al.

Summary: SSBs have the potential to replace Li-ion batteries, but they still face challenges. Recent technological advancements are focusing on overcoming these challenges around the electrochemical, thermal, and mechanical properties.
Article Chemistry, Physical

High Performance All-Solid-State Batteries with a Ni-Rich NCM Cathode Coated by Atomic Layer Deposition and Lithium Thiophosphate Solid Electrolyte

David Kitsche et al.

Summary: The study demonstrates the positive effect of atomic layer deposition (ALD) HfO2 coating on the cyclic performance and stability of NCM-851005 cathode material. Post-annealing to change the coating morphology considerably improves cycling performance, especially the initial cycle Coulombic efficiency and rate capability.

ACS APPLIED ENERGY MATERIALS (2021)

Review Green & Sustainable Science & Technology

Operando Characterization Techniques for All-Solid-State Lithium-Ion Batteries

Florian Strauss et al.

Summary: Lithium-ion batteries are widely used due to their high energy and power densities, while solid-state batteries offer potential improvements in energy density and safety. In situ techniques have advanced the understanding of battery performance and are crucial for the study of solid-state batteries.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

Article Chemistry, Multidisciplinary

Pathways towards managing cost and degradation risk of fast charging cells with electrical and thermal controls

Juhyun Song et al.

Summary: The study shows that by introducing a constant-risk fast charging protocol under moderate allowable risks of degradation, an 80% charging of a typical NMC/graphite cell can be achieved in just 10 minutes at a low cost.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Materials Science, Ceramics

Progress of Spark Plasma Sintering (SPS) Method, Systems, Ceramics Applications and Industrialization

Masao Tokita

Summary: The SPS method has gained significant interest in academia and industry, with fifth-generation systems capable of producing larger parts for various industries.

CERAMICS-SWITZERLAND (2021)

Article Chemistry, Multidisciplinary

Quantification of heterogeneous, irreversible lithium plating in extreme fast charging of lithium-ion batteries

Partha P. Paul et al.

Summary: This study investigates the local lithium plating characteristics of lithium-ion batteries after XFC cycling using spatially resolved X-ray diffraction, revealing a spatial correlation between irreversible lithium plating, inactive lithiated graphite phases, and local state-of-charge of the cathode. The research shows that irreversibly plated lithium leads to a loss of lithium inventory and active anode material, driving capacity fade in the batteries.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Computer Science, Interdisciplinary Applications

Li-containing alloys beneficial for stabilizing lithium anode: A review

Xingxing Gu et al.

Summary: The article summarizes the importance of lithium-containing alloys for high-safety and high-energy density battery storage systems in electric vehicles and grid-scale energy storage. It highlights the recent progress in inhibiting lithium dendrite growth and improving Coulombic efficiency, while discussing the challenges and future research focus of lithium-containing alloys in lithium metal batteries.

ENGINEERING REPORTS (2021)

Review Chemistry, Multidisciplinary

All-solid-state lithium batteries enabled by sulfide electrolytes: from fundamental research to practical engineering design

Changhong Wang et al.

Summary: This review highlights the latest progress in sulfide electrolyte-based all-solid-state lithium batteries, focusing on effective strategies to improve ion conductivity and interface stability, as well as methods to address challenges at the cathode and anode interfaces. Advanced in situ characterization techniques are examined to provide a deeper understanding of the interface properties of all-solid-state lithium batteries.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Re-examining rates of lithium-ion battery technology improvement and cost decline†

Micah S. Ziegler et al.

Summary: Lithium-ion technologies are increasingly used in electrifying transportation and energy storage, showing significant potential for cost reduction and performance improvement. Research indicates that the real price of lithium-ion cells has decreased by about 97% since 1991, with estimates suggesting further declines in the future. The study highlights the potential for advancements in lithium-ion technologies' performance and cost-effectiveness.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Materials Science, Multidisciplinary

Tailoring grain growth and densification toward a high-performance solid-state electrolyte membrane

Min Hong et al.

Summary: Through high-temperature rapid sintering, precise control over grain growth and densification can be achieved to prepare high-quality, high-performance solid-state electrolyte membranes for lithium batteries, demonstrating good ionic conductivity and stability, and suitable for future development of solid-state batteries.

MATERIALS TODAY (2021)

Review Chemistry, Physical

Solid-State Li-Metal Batteries: Challenges and Horizons of Oxide and Sulfide Solid Electrolytes and Their Interfaces

Kun Joong Kim et al.

Summary: The introduction of new, safe, and reliable solid-electrolyte chemistries and technologies can potentially overcome the challenges facing their liquid counterparts while widening the breadth of possible applications. Through analyzing the transition from liquid-based Li-ion batteries (LIBs) to all-solid-state Li-metal batteries (ASSLBs), a roadmap for the development of a successful oxide and sulfide-based ASSLB is introduced, focusing on interfacial challenges and considering parameters such as energy density, power density, longterm stability, processing, and safety.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Multidisciplinary

Additive Manufacturing of Batteries

Yaokun Pang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Multidisciplinary

Recent Progress in Organic-Inorganic Composite Solid Electrolytes for All-Solid-State Lithium Batteries

Dechao Zhang et al.

CHEMISTRY-A EUROPEAN JOURNAL (2020)

Article Nanoscience & Nanotechnology

Analysis of Interfacial Effects in All-Solid-State Batteries with Thiophosphate Solid Electrolytes

Anton Neumann et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Construct an Ultrathin Bismuth Buffer for Stable Solid-State Lithium Metal Batteries

Fei Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Electrochemistry

Nanoscale characterization of solid electrolyte by Scanning Probe Microscopy techniques

Zhongting Wang et al.

ELECTROCHIMICA ACTA (2020)

Review Materials Science, Multidisciplinary

A glimpse on all-solid-state Li-ion battery (ASSLIB) performance based on novel solid polymer electrolytes: a topical review

Anil Arya et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Article Chemistry, Physical

A new on-line method for lithium plating detection in lithium-ion batteries

Upender Rao Koleti et al.

JOURNAL OF POWER SOURCES (2020)

Review Materials Science, Multidisciplinary

Advanced characterization techniques for solid state lithium battery research

Yuxuan Xiang et al.

MATERIALS TODAY (2020)

Article Multidisciplinary Sciences

Closed-loop optimization of fast-charging protocols for batteries with machine learning

Peter M. Attia et al.

NATURE (2020)

Article Chemistry, Physical

Li2CO3: A Critical Issue for Developing Solid Garnet Batteries

Hanyu Huo et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Physical

Challenges in Lithium Metal Anodes for Solid-State Batteries

Kelsey B. Hatzell et al.

ACS ENERGY LETTERS (2020)

Review Nanoscience & Nanotechnology

Understanding interface stability in solid-state batteries

Yihan Xiao et al.

NATURE REVIEWS MATERIALS (2020)

Article Nanoscience & Nanotechnology

Probing the Mechanical Properties of a Doped Li7La3Zr2O12 Garnet Thin Electrolyte for Solid-State Batteries

Zhezhen Fu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Environmental

Interface engineering on cathode side for solid garnet batteries

Zhijie Bi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Chemistry, Multidisciplinary

Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries

Chengwei Wang et al.

CHEMICAL REVIEWS (2020)

Article Multidisciplinary Sciences

A general method to synthesize and sinter bulk ceramics in seconds

Chengwei Wang et al.

SCIENCE (2020)

Article Chemistry, Physical

Reversible Short-Circuit Behaviors in Garnet-Based Solid-State Batteries

Weiwei Ping et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Solid-Solution-Based Metal Alloy Phase for Highly Reversible Lithium Metal Anode

Song Jin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

Materials Design Principles for Air-Stable Lithium/Sodium Solid Electrolytes

Yizhou Zhu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Physical

Recent advances and future challenges in printed batteries

C. M. Costa et al.

ENERGY STORAGE MATERIALS (2020)

Review Nanoscience & Nanotechnology

Interface Between Solid-State Electrolytes and Li-Metal Anodes: Issues, Materials, and Processing Routes

Zizheng Tong et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Synchrotron Imaging of Pore Formation in Li Metal Solid-State Batteries Aided by Machine Learning

Marm B. Dixit et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Multidisciplinary Sciences

Direct observation of lithium metal dendrites with ceramic solid electrolyte

Maryam Golozar et al.

SCIENTIFIC REPORTS (2020)

Article Nanoscience & Nanotechnology

Pressing challenges of halide perovskite thin film growth

Tatiana Soto-Montero et al.

APL MATERIALS (2020)

Article Chemistry, Physical

Characterization of mechanical degradation in an all-solid-state battery cathode

Tan Shi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Multidisciplinary

Spatial dynamics of lithiation and lithium plating during high-rate operation of graphite electrodes

Donal P. Finegan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Electrochemistry

Artificial Intelligence Investigation of NMC Cathode Manufacturing Parameters Interdependencies

Ricardo Pinto Cunha et al.

BATTERIES & SUPERCAPS (2020)

Review Nanoscience & Nanotechnology

Can we find solution to eliminate Li penetration through solid garnet electrolytes?

W. L. Huang et al.

MATERIALS TODAY NANO (2020)

Article Chemistry, Multidisciplinary

Design of a mixed conductive garnet/Li interface for dendrite-free solid lithium metal batteries

Hanyu Huo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Physical

Pressure effects on sulfide electrolytes for all solid-state batteries

Jean-Marie Doux et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

All-Solid-State Batteries Using Rationally Designed Garnet Electrolyte Frameworks

Eongyu Yi et al.

ACS APPLIED ENERGY MATERIALS (2020)

Article Materials Science, Multidisciplinary

High-rate lithium cycling in a scalable trilayer Li-garnet-electrolyte architecture

Gregory T. Hitz et al.

MATERIALS TODAY (2019)

Article Chemistry, Physical

Mechanical failure of garnet electrolytes during Li electrodeposition observed by in-operando microscopy

William Manalastas et al.

JOURNAL OF POWER SOURCES (2019)

Article Chemistry, Physical

Interphase Morphology between a Solid-State Electrolyte and Lithium Controls Cell Failure

John A. Lewis et al.

ACS ENERGY LETTERS (2019)

Article Energy & Fuels

Data-driven prediction of battery cycle life before capacity degradation

Kristen A. Severson et al.

NATURE ENERGY (2019)

Article Nanoscience & Nanotechnology

Guidelines for All-Solid-State Battery Design and Electrode Buffer Layers Based on Chemical Potential Profile Calculation

Takashi Nakamura et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Lithium Chlorides and Bromides as Promising Solid-State Chemistries for Fast Ion Conductors with Good Electrochemical Stability

Shuo Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Nanoscience & Nanotechnology

Failure Mechanism and Interface Engineering for NASICON-Structured All-Solid-State Lithium Metal Batteries

Linchun He et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Flexible Organic-Inorganic Composite Solid Electrolyte with Asymmetric Structure for Room Temperature Solid -State Li-Ion Batteries

Jianli Gai et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Chemistry, Physical

Visualizing Chemomechanical Degradation of a Solid-State Battery Electrolyte

Jared Tippens et al.

ACS ENERGY LETTERS (2019)

Review Energy & Fuels

Challenges and opportunities towards fast-charging battery materials

Yayuan Liu et al.

NATURE ENERGY (2019)

Article Chemistry, Physical

Solid-State Chemistries Stable with High-Energy Cathodes for Lithium-Ion Batteries

Adelaide M. Nolan et al.

ACS ENERGY LETTERS (2019)

Article Nanoscience & Nanotechnology

Argyrodite Solid Electrolyte with a Stable Interface and Superior Dendrite Suppression Capability Realized by ZnO Co-Doping

Ting Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Crystal Structural Framework of Lithium Super-Ionic Conductors

Xingfeng He et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Multidisciplinary

Lithium-Graphite Paste: An Interface Compatible Anode for Solid-State Batteries

Jian Duan et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

Acid induced conversion towards a robust and lithiophilic interface for Li-Li7La3Zr2O12 solid-state batteries

Yadong Ruan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Physical

Inorganic sulfide solid electrolytes for all-solid-state lithium secondary batteries

Peng-Jie Lian et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Multidisciplinary

Prospects of production technologies and manufacturing costs of oxide-based all-solid-state lithium batteries

Joscha Schnell et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Review Chemistry, Multidisciplinary

Chemo-Mechanical Challenges in Solid-State Batteries

John A. Lewis et al.

TRENDS IN CHEMISTRY (2019)

Review Materials Science, Multidisciplinary

Artificial Interphases for Highly Stable Lithium Metal Anode

Rui Xu et al.

MATTER (2019)

Article Chemistry, Physical

Lithium-Metal Growth Kinetics on LLZO Garnet-Type Solid Electrolytes

Thorben Krauskopf et al.

Review Energy & Fuels

Lithium-ion battery fast charging: A review

Anna Tomaszewska et al.

ETRANSPORTATION (2019)

Review Chemistry, Physical

3D printed electrochemical energy storage devices

Peng Chang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Multidisciplinary

Dendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers

Hui Duan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Physics, Condensed Matter

Neutron diffraction study on Li3PO4 solid electrolyte for lithium ion battery

Evvy Kartini et al.

PHYSICA B-CONDENSED MATTER (2018)

Article Chemistry, Physical

Universal Soldering of Lithium and Sodium Alloys on Various Substrates for Batteries

Chengwei Wang et al.

ADVANCED ENERGY MATERIALS (2018)

Review Chemistry, Multidisciplinary

Advances in Interfaces between Li Metal Anode and Electrolyte

Xue-Qiang Zhang et al.

ADVANCED MATERIALS INTERFACES (2018)

Article Nanoscience & Nanotechnology

Monolithic All-Phosphate Solid-State Lithium-Ion Battery with Improved Interfacial Compatibility

Shicheng Yu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Nanoscience & Nanotechnology

3D Fiber-Network-Reinforced Bicontinuous Composite Solid Electrolyte for Dendrite-free Lithium Metal Batteries

Dan Li et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

3D-Printing Electrolytes for Solid-State Batteries

Dennis W. McOwen et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

3D Printing of Customized Li-Ion Batteries with Thick Electrodes

Teng-Sing Wei et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Towards K-Ion and Na-Ion Batteries as Beyond Li-Ion

Kei Kubota et al.

CHEMICAL RECORD (2018)

Review Chemistry, Multidisciplinary

In situ analytical techniques for battery interface analysis

Alok M. Tripathi et al.

CHEMICAL SOCIETY REVIEWS (2018)

Review Chemistry, Multidisciplinary

Recent Developments of All-Solid-State Lithium Secondary Batteries with Sulfide Inorganic Electrolytes

Ruochen Xu et al.

CHEMISTRY-A EUROPEAN JOURNAL (2018)

Article Chemistry, Multidisciplinary

The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries

Bingbin Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Multidisciplinary

Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries

Stefanie Zekoll et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Multidisciplinary

Chemo-mechanical expansion of lithium electrode materials - on the route to mechanically optimized all-solid-state batteries

Raimund Koerver et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Automation & Control Systems

Impedance-Based Battery Management System for Safety Monitoring of Lithium-Ion Batteries

Bliss G. Carkhuff et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

Article Chemistry, Physical

Construction of conductive and flexible composite cathodes for room-temperature solid-state lithium batteries

Minghui He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Physical

3D printing well organized porous iron-nickel/polyaniline nanocages multiscale supercapacitor

Xufei Lu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Physical

All-Solid-State Li-Ion Battery Using Li1.5Al0.5Ge1.5(PO4)3 As Electrolyte Without Polymer Interfacial Adhesion

Yedukondalu Meesala et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Article Chemistry, Physical

All-solid-state lithium-ion and lithium metal batteries - paving the way to large-scale production

Joscha Schnell et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Emerging applications of spark plasma sintering in all solid-state lithium-ion batteries and beyond

Hongzheng Zhu et al.

JOURNAL OF POWER SOURCES (2018)

Article Materials Science, Ceramics

Structural (in)stability and spontaneous cracking of Li-La-zirconate cubic garnet upon exposure to ambient atmosphere

Sushobhan Kobi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Article Multidisciplinary Sciences

Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework

Chunpeng Yang et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Article Chemistry, Physical

Germanium Thin Film Protected Lithium Aluminum Germanium Phosphate for Solid-State Li Batteries

Yijie Liu et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Suppressing Li Dendrite Formation in Li2S-P2S5 Solid Electrolyte by LiI Incorporation

Fudong Han et al.

ADVANCED ENERGY MATERIALS (2018)

Review Chemistry, Multidisciplinary

Holographic Fabrication of 3D Nanostructures

Taeyoon Jeon et al.

ADVANCED MATERIALS INTERFACES (2018)

Article Nanoscience & Nanotechnology

Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition

Yulong Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries

Meng Cheng et al.

ADVANCED MATERIALS (2018)

Review Chemistry, Physical

Sulfide Solid Electrolytes for Lithium Battery Applications

Jonathan Lau et al.

ADVANCED ENERGY MATERIALS (2018)

Editorial Material Nanoscience & Nanotechnology

X-ray tomography for battery research and development

Vanessa Wood

NATURE REVIEWS MATERIALS (2018)

Article Chemistry, Physical

Li3BO3-Li2CO3: Rationally Designed Buffering Phase for Sulfide All Solid-State Li-Ion Batteries

Sung Hoo Jung et al.

CHEMISTRY OF MATERIALS (2018)

Article Materials Science, Multidisciplinary

Architectural design and fabrication approaches for solid-state batteries

Fang Hao et al.

MRS BULLETIN (2018)

Review Chemistry, Multidisciplinary

Interfaces Between Cathode and Electrolyte in Solid State Lithium Batteries: Challenges and Perspectives

Kaihui Nie et al.

FRONTIERS IN CHEMISTRY (2018)

Review Chemistry, Physical

Interfaces in Solid-State Lithium Batteries

Lin Xu et al.

Article Chemistry, Physical

Fundamental study on the wetting property of liquid lithium

Jiangyan Wang et al.

ENERGY STORAGE MATERIALS (2018)

Review Materials Science, Multidisciplinary

Advances in Understanding Materials for Rechargeable Lithium Batteries by Atomic Force Microscopy

Shuwei Wang et al.

ENERGY & ENVIRONMENTAL MATERIALS (2018)

Article Chemistry, Physical

Cryogenic Electron Microscopy for Characterizing and Diagnosing Batteries

Xuefeng Wang et al.

Article Chemistry, Physical

Interphase Engineering Enabled All-Ceramic Lithium Battery

Fudong Han et al.

Review Chemistry, Physical

Materials' Methods: NMR in Battery Research

Oliver Pecher et al.

CHEMISTRY OF MATERIALS (2017)

Article Chemistry, Physical

Electrochemical Cross-Talk Leading to Gas Evolution and Capacity Fade in LiNi0.5Mn1.5O4/Graphite Full-Cells

Barbara Michalak et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Article Chemistry, Physical

Negating interfacial impedance in garnet-based solid-state Li metal batteries

Xiaogang Han et al.

NATURE MATERIALS (2017)

Article Chemistry, Physical

Enabling fast charging - A battery technology gap assessment

Shabbir Ahmed et al.

JOURNAL OF POWER SOURCES (2017)

Article Chemistry, Physical

Enabling fast charging - Vehicle considerations

Andrew Meintz et al.

JOURNAL OF POWER SOURCES (2017)

Article Chemistry, Physical

Enabling fast charging - Battery thermal considerations

Matthew Keyser et al.

JOURNAL OF POWER SOURCES (2017)

Article Chemistry, Multidisciplinary

In Situ Neutron Depth Profiling of Lithium Metal-Garnet Interfaces for Solid State Batteries

Chengwei Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Electrochemistry

All-Solid-State Battery Electrode Sheets Prepared by a Slurry Coating Process

Atsushi Sakuda et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Chemistry, Physical

Compliant Yet Brittle Mechanical Behavior of Li2S-P2S5 Lithium-Ion-Conducting Solid Electrolyte

Frank P. McGrogan et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes

Lukas Porz et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

All-solid-state lithium-sulfur batteries based on a newly designed Li7P2.9Mn0.1S10.7I0.3 superionic conductor

Ruo-chen Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Impact of air exposure and surface chemistry on Li-Li7La3Zr2O12 interfacial resistance

Asma Sharafi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Redox-active cathode interphases in solid-state batteries

Raimund Koerver et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Multidisciplinary

Strategies Based on Nitride Materials Chemistry to Stabilize Li Metal Anode

Yizhou Zhu et al.

ADVANCED SCIENCE (2017)

Article Chemistry, Multidisciplinary

An Outlook on Lithium Ion Battery Technology

Arumugam Manthiram

ACS CENTRAL SCIENCE (2017)

Article Chemistry, Physical

Flexible Light-Weight Lithium-Ion-Conducting Inorganic-Organic Composite Electrolyte Membrane

Dorsasadat Safanama et al.

ACS ENERGY LETTERS (2017)

Article Multidisciplinary Sciences

Direct observation of a non-crystalline state of Li2S-P2S5 solid electrolytes

Hirofumi Tsukasaki et al.

SCIENTIFIC REPORTS (2017)

Article Nanoscience & Nanotechnology

New Class of LAGP-Based Solid Polymer Composite Electrolyte for Efficient and Safe Solid-State Lithium Batteries

Qingpeng Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Multidisciplinary

Electrode-Electrolyte Interfaces in Lithium-Sulfur Batteries with Liquid or Inorganic Solid Electrolytes

Xingwen Yu et al.

ACCOUNTS OF CHEMICAL RESEARCH (2017)

Article Nanoscience & Nanotechnology

The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries

Wenbo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Ionically conductive polymer/ceramic separator for lithium-sulfur batteries

Anne Freitag et al.

ENERGY STORAGE MATERIALS (2017)

Article Chemistry, Physical

Atomic Layer Deposition of the Solid Electrolyte Garnet Li7La3Zr2O12

Eric Kazyak et al.

CHEMISTRY OF MATERIALS (2017)

Article Chemistry, Multidisciplinary

Solution-Processable Glass LiI-Li4SnS4 Superionic Conductors for All-Solid-State Li-Ion Batteries

Kern Ho Park et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Physical

Interface Stability in Solid-State Batteries

William D. Richards et al.

CHEMISTRY OF MATERIALS (2016)

Article Nanoscience & Nanotechnology

Li7La3Zr2O12 Interface Modification for Li Dendrite Prevention

Chill-Long Tsai et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

Lithiation of Crystalline Silicon As Analyzed by Operando Neutron Reflectivity

Beatrix-Kamelia Seidlhofer et al.

ACS NANO (2016)

Article Chemistry, Physical

Oxygen substitution effects in Li10GeP2S12 solid electrolyte

Yulong Sun et al.

JOURNAL OF POWER SOURCES (2016)

Article Chemistry, Multidisciplinary

Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte

Weidong Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte

Wei Luo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Physical

Oxygen-driven transition from two-dimensional to three-dimensional transport behaviour in β-Li3PS4 electrolyte

Xuelong Wang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Article Multidisciplinary Sciences

Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries

Kun (Kelvin) Fu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Chemistry, Physical

Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid Electrolytes

Fudong Han et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Multidisciplinary

Dendrites and Pits: Untangling the Complex Behavior of Lithium Metal Anodes through Operando Video Microscopy

Kevin N. Wood et al.

ACS CENTRAL SCIENCE (2016)

Article Energy & Fuels

High-power all-solid-state batteries using sulfide superionic conductors

Yuki Kato et al.

NATURE ENERGY (2016)

Article Chemistry, Multidisciplinary

A Battery Made from a Single Material

Fudong Han et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Physical

Atomic Layer Deposition of the Solid Electrolyte LiPON

Alexander C. Kozen et al.

CHEMISTRY OF MATERIALS (2015)

Article Chemistry, Physical

First-Principles Studies on Cation Dopants and ElectrolytelCathode Interphases for Lithium Garnets

Lincoln J. Miara et al.

CHEMISTRY OF MATERIALS (2015)

Review Chemistry, Multidisciplinary

Advances and Future Challenges in Printed Batteries

Ricardo E. Sousa et al.

CHEMSUSCHEM (2015)

Article Chemistry, Physical

Toward fast and cost-effective ink-jet printing of solid electrolyte for lithium microbatteries

P. -E. Delannoy et al.

JOURNAL OF POWER SOURCES (2015)

Article Chemistry, Physical

Development of rechargeable lithium-bromine batteries with lithium ion conducting solid electrolyte

Koshin Takemoto et al.

JOURNAL OF POWER SOURCES (2015)

Review Chemistry, Physical

A review of lithium and non-lithium based solid state batteries

Joo Gon Kim et al.

JOURNAL OF POWER SOURCES (2015)

Article Chemistry, Physical

Design principles for solid-state lithium superionic conductors

Yan Wang et al.

NATURE MATERIALS (2015)

Article Materials Science, Multidisciplinary

Beyond Li-ion: electrode materials for sodium- and magnesium-ion batteries

Robert C. Masse et al.

SCIENCE CHINA-MATERIALS (2015)

Article Chemistry, Physical

Solid Electrolyte: the Key for High-Voltage Lithium Batteries

Juchuan Li et al.

ADVANCED ENERGY MATERIALS (2015)

Article Electrochemistry

Three dimensional (3D) printed electrodes for interdigitated supercapacitors

Chen Zhao et al.

ELECTROCHEMISTRY COMMUNICATIONS (2014)

Article Chemistry, Multidisciplinary

A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries

Yoshikatsu Seino et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Interface Limited Lithium Transport in Solid-State Batteries

Dhamodaran Santhanagopalan et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Article Chemistry, Physical

A synthesis of crystalline Li7P3S11 solid electrolyte from 1,2-dimethoxyethane solvent

Seitaro Ito et al.

JOURNAL OF POWER SOURCES (2014)

Review Chemistry, Physical

A review of lithium deposition in lithium-ion and lithium metal secondary batteries

Zhe Li et al.

JOURNAL OF POWER SOURCES (2014)

Article Electrochemistry

Empowering the Lithium Metal Battery through a Silicon-Based Superionic Conductor

Justin M. Whiteley et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Article Chemistry, Physical

Rechargeable Li//Br battery: a promising platform for post lithium ion batteries

Zheng Chang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Review Energy & Fuels

Recent advances in inorganic solid electrolytes for lithium batteries

Can Cao et al.

FRONTIERS IN ENERGY RESEARCH (2014)

Article Chemistry, Multidisciplinary

Lithium Superionic Sulfide Cathode for All-Solid Lithium-Sulfur Batteries

Zhan Lin et al.

ACS NANO (2013)

Article Chemistry, Multidisciplinary

3D Printing of Interdigitated Li-Ion Microbattery Architectures

Ke Sun et al.

ADVANCED MATERIALS (2013)

Article Chemistry, Multidisciplinary

Li10SnP2S12: An Affordable Lithium Superionic Conductor

Philipp Bron et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Article Chemistry, Multidisciplinary

Interfacial Nanoarchitectonics for Solid-State Lithium Batteries

Kazunori Takada

LANGMUIR (2013)

Article Chemistry, Physical

Improvement of chemical stability of Li3PS4 glass electrolytes by adding MxOy (M = Fe, Zn, and Bi) nanoparticles

Akitoshi Hayashi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Review Chemistry, Multidisciplinary

Inkjet Printing of Carbon Nanotubes

Ryan P. Tortorich et al.

NANOMATERIALS (2013)

Article Chemistry, Physical

Synthesize battery degradation modes via a diagnostic and prognostic model

Matthieu Dubarry et al.

JOURNAL OF POWER SOURCES (2012)

Article Chemistry, Physical

High-capacity thin film lithium batteries with sulfide solid electrolytes

Mitsuyasu Ogawa et al.

JOURNAL OF POWER SOURCES (2012)

Article Chemistry, Multidisciplinary

Electrolyte Stability Determines Scaling Limits for Solid-State 3D Li Ion Batteries

Dmitry Ruzmetov et al.

NANO LETTERS (2012)

Article Chemistry, Physical

Interfacial phenomena in solid-state lithium battery with sulfide solid electrolyte

Kazunori Takada et al.

SOLID STATE IONICS (2012)

Article Chemistry, Multidisciplinary

In Situ Neutron Depth Profiling: A Powerful Method to Probe Lithium Transport in Micro-Batteries

J. F. M. Oudenhoven et al.

ADVANCED MATERIALS (2011)

Article Chemistry, Multidisciplinary

Crystal Structure of Fast Lithium-ion-conducting Cubic Li7La3Zr2O12

Junji Awaka et al.

CHEMISTRY LETTERS (2011)

Article Chemistry, Physical

Self-Organized Core-Shell Structure for High-Power Electrode in Solid-State Lithium Batteries

Xiaoxiong Xu et al.

CHEMISTRY OF MATERIALS (2011)

Article Chemistry, Physical

A lithium superionic conductor

Noriaki Kamaya et al.

NATURE MATERIALS (2011)

Article Chemistry, Multidisciplinary

A novel high energy density rechargeable lithium/air battery

Tao Zhang et al.

CHEMICAL COMMUNICATIONS (2010)

Review Chemistry, Physical

Challenges for Rechargeable Li Batteries

John B. Goodenough et al.

CHEMISTRY OF MATERIALS (2010)

Article Chemistry, Physical

Role of surface coating on cathode materials for lithium-ion batteries

Zonghai Chen et al.

JOURNAL OF MATERIALS CHEMISTRY (2010)

Article Materials Science, Ceramics

Preparation and characterization of lithium ion conducting Li2S-P2S5-GeS2 glasses and glass-ceramics

Keiichi Minami et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2010)

Article Electrochemistry

Electrochemical Analysis of Li4Ti5O12 Electrode in All-Solid-State Lithium Secondary Batteries

Hirokazu Kitaura et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)

Review Energy & Fuels

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

Frederik C. Krebs

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)

Article Physics, Applied

Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview

R. C. Agrawal et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)

Article Chemistry, Physical

Interfacial modification for high-power solid-state lithium batteries

Kazunon Takada et al.

SOLID STATE IONICS (2008)

Article Electrochemistry

LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteries

Narumi Ohta et al.

ELECTROCHEMISTRY COMMUNICATIONS (2007)

Article Chemistry, Multidisciplinary

Fast lithium ion conduction in garnet-type Li7La3Zr2O12

Ramaswamy Murugan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)

Article Electrochemistry

The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces

C Monroe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Article Chemistry, Physical

Cold neutron depth protiling of lithium-ion battery materials

GP Lamaze et al.

JOURNAL OF POWER SOURCES (2003)

Article Materials Science, Ceramics

Novel fast lithium ion conduction in garnet-type Li5La3M2O12 (M = Nb, Ta)

V Thangadurai et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)