4.8 Article

Architecture design principles for stable electrodeposition behavior-towards better alkali metal (Li/Na/K) anodes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

A Pressure Self-Adaptable Route for Uniform Lithium Plating and Stripping in Composite Anode

Peng Shi et al.

Summary: A new strategy for designing composite anodes to regulate the inner Li plating/stripping using self-adaptable pressure was proposed in this study. This approach resulted in higher cycling stability and longer battery life for lithium metal batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Physical

Interfacial challenges towards stable Li metal anode

Zheng Luo et al.

Summary: Rechargeable Li metal batteries had a glory moment in the 1980s, but were soon suspended due to safety concerns. However, with the increasing demands for high energy devices, Li metal anodes are now experiencing a revival. Despite significant progress, efficiency and safety issues continue to plague current Li metal anodes, highlighting the importance of understanding the interfacial chemistry and kinetics for practical applications.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

In Situ Construction of Lithium Silicide Host with Unhindered Lithium Spread for Dendrite-Free Lithium Metal Anode

Xin-Yang Yue et al.

Summary: A stable Li21Si5 alloy host with low Li diffusion barriers was designed and prepared using a low-cost micron silicon precursor in this study, enabling dendrite-free Li deposition behavior and superior structural stability. The new Li metal anode with Li21Si5 host showed promising cycle stability and rate capability with low polarization in both symmetric and full cells, indicating potential for alloy-based materials as hosts for Li composite anodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

3D Artificial Solid-Electrolyte Interphase for Lithium Metal Anodes Enabled by Insulator-Metal-Insulator Layered Heterostructures

Pengbo Zhai et al.

Summary: The construction of a 3D architecture using g-C3N4/graphene/g-C3N4 insulator-metal-insulator sandwiched nanosheets can guide uniform lithium plating/stripping, preventing lithium dendrite growth and enabling stable cycling in high-performance batteries.

ADVANCED MATERIALS (2021)

Review Energy & Fuels

Crucial Challenges and Recent Optimization Progress of Metal-Sulfur Battery Electrolytes

Pengzhou Mu et al.

Summary: Metal-sulfur batteries face challenges in achieving higher energy storage performance due to issues like the shuttle effect of polysulfides. Therefore, the rational optimization of electrolytes is considered a crucial direction to improve performance. Recent progress in optimizing electrolytes for MSBs with Li, Na, Mg, Ca, K, and Al as metal anodes may provide possible solutions for further performance enhancement.

ENERGY & FUELS (2021)

Article Nanoscience & Nanotechnology

Identification of LiH and nanocrystalline LiF in the solid-electrolyte interphase of lithium metal anodes

Zulipiya Shadike et al.

Summary: A comprehensive understanding of the solid-electrolyte interphase (SEI) composition is crucial for developing high-energy batteries based on lithium metal anodes. This study used synchrotron-based X-ray diffraction and pair distribution function analysis to identify and differentiate two elusive components, LiH and LiF, in the SEI of lithium metal anodes. The presence of LiH in the SEI was confirmed, with discussion on the possibility of its misidentification as LiF in the literature. The study also found that LiF in the SEI has different structural features from LiF in the bulk phase, which favor Li+ transport and make it a favored component for the SEI.

NATURE NANOTECHNOLOGY (2021)

Article Energy & Fuels

Rejuvenating dead lithium supply in lithium metal anodes by iodine redox

Chengbin Jin et al.

Summary: The researchers use an iodic species to react with inactive lithium, bringing it back to life and thus making batteries last longer.

NATURE ENERGY (2021)

Article Chemistry, Physical

3D printing for rechargeable lithium metal batteries

Shuang Zhou et al.

Summary: This review explores the recent advances in 3D printing for rechargeable LMBs, examining their fundamental principles and representative printing techniques, discussing applications at component levels, summarizing design rationales and practical challenges, and providing insights on the future outlook of this emerging field.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Strategies towards the challenges of zinc metal anode in rechargeable aqueous zinc ion batteries

Jiawei Wang et al.

Summary: The research summarized above categorizes and reviews strategies to address challenges related to zinc metal anodes for rechargeable aqueous zinc ion batteries. By focusing on electrochemical and chemical reaction principles, the study aims to provide insights into improving the performance of these batteries and explores prospects for the development of zinc metal anodes.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Applied

New insights into dead lithium during stripping in lithium metal batteries

Xiao-Ru Chen et al.

Summary: This study systematically investigated the formation and evaluation of dead Li-0, proposing design principles for achieving higher Coulombic efficiency and less dead Li-0 in lithium metal batteries. This new insight sheds light on dead Li-0 formation and guides the development of next-generation safe batteries.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Energy & Fuels

Free-standing ultrathin lithium metal-graphene oxide host foils with controllable thickness for lithium batteries

Hao Chen et al.

Summary: An ultrathin, free-standing, mechanically robust Li metal foil has been developed, which improves the initial Coulombic efficiency, increases full cell capacity, and prolongs the cycle life of Li metal full cells.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

Reclaiming Inactive Lithium with a Triiodide/Iodide Redox Couple for Practical Lithium Metal Batteries

Cheng-Bin Jin et al.

Summary: This study demonstrates that the triiodide/iodide redox couple can significantly reclaim inactive Li, improving the cyclability of lithium metal batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Building carbon cloth-based dendrite-free potassium metal anodes for potassium metal pouch cells

Fan Qiao et al.

Summary: Potassium (K) metal batteries are considered promising energy storage devices due to the properties of K metal. However, the growth of K dendrites poses a challenge. A dendrite-free K metal anode was achieved by constraining K metal on SnO2-modified commercial carbon cloth. This structure exhibited low polarization, long cycling life, and good performance in symmetric cells and full cells. The results suggest a potential for commercialization of K metal anodes.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

A facile method to stabilize sodium metal anodes towards high-performance sodium batteries†

Qiongqiong Lu et al.

Summary: Sodium metal is the ideal anode material for high-energy-density sodium metal batteries, but it faces challenges such as dendrite growth and gas evolution. A protective layer fabricated using 1,3-dioxolane demonstrates improved stability and efficiency for the sodium metal anode, leading to enhanced battery performance. Additionally, large format protected sodium metal anodes show stable specific capacity when assembled in pouch cells, highlighting the potential of this protection strategy for commercial applications.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Biomass-based materials for green lithium secondary batteries

Chengbin Jin et al.

Summary: The advances in process engineering, nanotechnology, and materials science have made it possible for biomass to be used in novel energy storage technologies like lithium secondary batteries (LSBs). Biomass-derived materials can be sustainable battery components, contributing to green battery systems. This review provides a comprehensive overview of the fabrication and application of biomass and biomass-derived materials in LSBs, emphasizing the potential for high-performance green battery systems.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Lithium-activated SnS-graphene alternating nanolayers enable dendrite-free cycling of thin sodium metal anodes in carbonate electrolyte

Wei Liu et al.

Summary: In this study, a lithium-ion activated tin sulfide graphene nanocomposite membrane was used as an artificial solid electrolyte layer for sodium metal batteries, enabling thin sodium metal foils to achieve excellent cyclability in a carbonate electrolyte. Metal cells protected by the membrane showed low-overpotential extended high-rate cycling. The post-mortem analysis revealed that the membrane effectively suppressed metal swelling, dendrite growth, and dead metal formation compared to unprotected samples.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

High performance sodium-sulfur batteries at low temperature enabled by superior molten Na wettability

Minyuan M. Li et al.

Summary: Improving sodium wettability on beta ''-Al2O3 at low temperatures through raising the surface treatment temperature of lead acetate trihydrate has led to high capacity and stable cycling in Na-S cells.

CHEMICAL COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

MXene-Based Dendrite-Free Potassium Metal Batteries

Xiao Tang et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

A Nano-shield Design for Separators to Resist Dendrite Formation in Lithium-Metal Batteries

Jie Liang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

Dendrite-Free Sodium Metal Anodes Enabled by a Sodium Benzenedithiolate-Rich Protection Layer

Ming Zhu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Multidisciplinary Sciences

In situ healing of dendrites in a potassium metal battery

Prateek Hundekar et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Review Chemistry, Multidisciplinary

Emerging Potassium Metal Anodes: Perspectives on Control of the Electrochemical Interfaces

Pengcheng Liu et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

Article Chemistry, Multidisciplinary

A Periodic Self-Correction Scheme for Synchronizing Lithium Plating/Stripping at Ultrahigh Cycling Capacity

Peichao Zou et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Design of a Multifunctional Interlayer for NASCION-Based Solid-State Li Metal Batteries

Shizhao Xiong et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Lithium Bonds in Lithium Batteries

Xiang Chen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Multidisciplinary

Advanced Current Collectors for Alkali Metal Anodes

Jianyu Chen et al.

CHEMICAL RESEARCH IN CHINESE UNIVERSITIES (2020)

Article Chemistry, Multidisciplinary

Core-Shell C@Sb Nanoparticles as a Nucleation Layer for High-Performance Sodium Metal Anodes

Guanyao Wang et al.

NANO LETTERS (2020)

Article Chemistry, Multidisciplinary

Dynamic Intelligent Cu Current Collectors for Ultrastable Lithium Metal Anodes

Jianyu Chen et al.

NANO LETTERS (2020)

Article Chemistry, Multidisciplinary

Recent Progress in Designing Stable Composite Lithium Anodes with Improved Wettability

Zi-Jian Zheng et al.

ADVANCED SCIENCE (2020)

Article Chemistry, Physical

Reviewing the current status and development of polymer electrolytes for solid-state lithium batteries

Hangchao Wang et al.

ENERGY STORAGE MATERIALS (2020)

Review Chemistry, Multidisciplinary

Towards practical lithium-metal anodes

Xin Zhang et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Chemistry, Physical

Poly(vinylidene difluoride) coating on Cu current collector for high-performance Na metal anode

Zhen Hou et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Synergistic effect of interface layer and mechanical pressure for advanced Li metal anodes

Liangdong Lin et al.

ENERGY STORAGE MATERIALS (2020)

Review Chemistry, Physical

Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries

Ghulam Yasin et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Multidisciplinary

Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries

Zahid Ali Ghazi et al.

Article Multidisciplinary Sciences

Conductivity and lithiophilicity gradients guide lithium deposition to mitigate short circuits

Jun Pu et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

An Interfacial Layer Based on Polymers of Intrinsic Microporosity to Suppress Dendrite Growth on Li Metal Anodes

Liya Qi et al.

CHEMISTRY-A EUROPEAN JOURNAL (2019)

Article Nanoscience & Nanotechnology

Bendable Network Built with Ultralong Silica Nanowires as a Stable Separator for High-Safety and High-Power Lithium-Metal Batteries

Qing-Chuan Du et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

A 4 V Class Potassium Metal Battery with Extremely Low Overpotential

Minghui Ye et al.

ACS NANO (2019)

Article Chemistry, Physical

Ultrathin Bilayer of Graphite/SiO2 as Solid Interface for Reviving Li Metal Anode

Rajesh Pathak et al.

ADVANCED ENERGY MATERIALS (2019)

Article Nanoscience & Nanotechnology

Hybrid Protective Layer for Stable Sodium Metal Anodes at High Utilization

Zhen Hou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

A Sodiophilic Interphase-Mediated, Dendrite-Free Anode with Ultrahigh Specific Capacity for Sodium-Metal Batteries

Lei Ye et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Flexible Amalgam Film Enables Stable Lithium Metal Anodes with High Capacities

Guang He et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Nucleation and Early Stage Growth of Li Electrodeposits

Prayag Biswal et al.

NANO LETTERS (2019)

Article Chemistry, Multidisciplinary

Mega High Utilization of Sodium Metal Anodes Enabled by Single Zinc Atom Sites

Tingzhou Yang et al.

NANO LETTERS (2019)

Article Nanoscience & Nanotechnology

A Scalable Approach for Dendrite-Free Alkali Metal Anodes via Room-Temperature Facile Surface Fluorination

Gang Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Pillared MXene with Ultralarge Interlayer Spacing as a Stable Matrix for High Performance Sodium Metal Anodes

Jianmin Luo et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Lithiophilic LiC6 Layers on Carbon Hosts Enabling Stable Li Metal Anode in Working Batteries

Peng Shi et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Multidisciplinary

Guiding Uniform Li Plating/Stripping through Lithium-Aluminum Alloying Medium for Long-Life Li Metal Batteries

Huan Ye et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Physical

Low volume change composite lithium metal anodes

Zi-Jian Zheng et al.

NANO ENERGY (2019)

Article Chemistry, Physical

Three-dimensional carbon felt host for stable sodium metal anode

Jiaolong Zhang et al.

CARBON (2019)

Article Chemistry, Multidisciplinary

Nanocrevasse-Rich Carbon Fibers for Stable Lithium and Sodium Metal Anodes

Wooseok Go et al.

NANO LETTERS (2019)

Review Chemistry, Multidisciplinary

Alkali Metal Anodes for Rechargeable Batteries

Hua Wang et al.

Review Chemistry, Physical

Interlayers for lithium-based batteries

Long Jiao et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

Surface engineering of commercial Ni foams for stable Li metal anodes

Xi Ke et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Multidisciplinary

Room-temperature liquid metal-based anodes for high-energy potassium-based electrochemical devices

Lei Qin et al.

CHEMICAL COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

A robust 3D host for sodium metal anodes with excellent machinability and cycling stability

Wan-Sheng Xiong et al.

CHEMICAL COMMUNICATIONS (2018)

Article Engineering, Environmental

Hierarchically designed ZIF-8-derived Ni@ZnO/carbon nanofiber freestanding composite for stable Li storage

Bhavana Joshi et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Electrochemistry

Uniform metal-ion flux through interface-modified membrane for highly stable metal batteries

Patrick J. Kim et al.

ELECTROCHIMICA ACTA (2018)

Article Chemistry, Physical

3D Flexible Carbon Felt Host for Highly Stable Sodium Metal Anodes

Shang-Sen Chi et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

A room-temperature sodium metal anode enabled by a sodiophilic layer

Shuai Tang et al.

NANO ENERGY (2018)

Article Chemistry, Inorganic & Nuclear

Achieving a stable Na metal anode with a 3D carbon fibre scaffold

Qiu Zhang et al.

INORGANIC CHEMISTRY FRONTIERS (2018)

Article Chemistry, Multidisciplinary

MXene Aerogel Scaffolds for High-Rate Lithium Metal Anodes

Xinyue Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Review Chemistry, Multidisciplinary

Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries

Yang Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Review Chemistry, Multidisciplinary

Controlling Nucleation in Lithium Metal Anodes

Xuze Guan et al.

Article Chemistry, Physical

A Highly Stable Sodium-Oxygen Battery Using a Mechanically Reinforced Membrane

Younes Ansari et al.

ADVANCED ENERGY MATERIALS (2018)

Article Multidisciplinary Sciences

An ion redistributor for dendrite-free lithium metal anodes

Chen-Zi Zhao et al.

SCIENCE ADVANCES (2018)

Article Chemistry, Physical

3D printed separator for the thermal management of high-performance Li metal anodes

Yang Liu et al.

ENERGY STORAGE MATERIALS (2018)

Article Chemistry, Physical

Highly reversible Na and K metal anodes enabled by carbon paper protection

Peirong Li et al.

ENERGY STORAGE MATERIALS (2018)

Review Chemistry, Physical

Advancing Lithium Metal Batteries

Bin Liu et al.

Article Chemistry, Physical

Honeycomb-like porous 3D nickel electrodeposition for stable Li and Na metal anodes

Yaolin Xu et al.

ENERGY STORAGE MATERIALS (2018)

Article Chemistry, Physical

Chemically polished lithium metal anode for high energy lithium metal batteries

Wei Tang et al.

ENERGY STORAGE MATERIALS (2018)

Article Chemistry, Physical

Ultrathin Surface Coating Enables the Stable Sodium Metal Anode

Wei Luo et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Multidisciplinary

Lithium Metal Anodes with an Adaptive Solid-Liquid Interfacial Protective Layer

Kai Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Porous Al Current Collector for Dendrite-Free Na Metal Anodes

Shan Liu et al.

NANO LETTERS (2017)

Article Chemistry, Physical

Garnet/polymer hybrid ion-conducting protective layer for stable lithium metal anode

Chunpeng Yang et al.

NANO RESEARCH (2017)

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Article Multidisciplinary Sciences

Three-dimensional stable lithium metal anode with nanoscale lithium islands embedded in ionically conductive solid matrix

Dingchang Lin et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Review Materials Science, Multidisciplinary

Nanosilicon anodes for high performance rechargeable batteries

Zheng-Long Xu et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Article Multidisciplinary Sciences

Designing solid-liquid interphases for sodium batteries

Snehashis Choudhury et al.

NATURE COMMUNICATIONS (2017)

Article Chemistry, Multidisciplinary

Core-Shell Nanoparticle Coating as an Interfacial Layer for Dendrite Free Lithium Metal Anodes

Wei Liu et al.

ACS CENTRAL SCIENCE (2017)

Article Energy & Fuels

A facile surface chemistry route to a stabilized lithium metal anode

Xiao Liang et al.

NATURE ENERGY (2017)

Article Chemistry, Multidisciplinary

Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode

Chunpeng Yang et al.

ADVANCED MATERIALS (2017)

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Review Chemistry, Multidisciplinary

Multi-shelled hollow micro-/nanostructures: promising platforms for lithium-ion batteries

Jiangyan Wang et al.

MATERIALS CHEMISTRY FRONTIERS (2017)

Article Chemistry, Multidisciplinary

Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes

Qinbai Yun et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Concentrated Electrolyte for the Sodium-Oxygen Battery: Solvation Structure and Improved Cycle Life

Mingfu He et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Chemistry, Multidisciplinary

Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance

Lei -Lei Lu et al.

NANO LETTERS (2016)

Article Nanoscience & Nanotechnology

Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2016)

Article Chemistry, Physical

Solubility of the Solid Electrolyte Interphase (SEI) in Sodium Ion Batteries

Ronnie Mogensen et al.

ACS ENERGY LETTERS (2016)

Article Chemistry, Multidisciplinary

Graphite-Encapsulated Li-Metal Hybrid Anodes for High-Capacity Li Batteries

Yongming Sun et al.

Article Chemistry, Physical

3D mapping of lithium in battery electrodes using neutron activation

Yuping He et al.

JOURNAL OF POWER SOURCES (2015)

Article Chemistry, Multidisciplinary

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes

Zheng Liang et al.

NANO LETTERS (2015)

Article Chemistry, Physical

Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode

Georg Bieker et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Article Chemistry, Multidisciplinary

Mechanical Surface Modification of Lithium Metal: Towards Improved Li Metal Anode Performance by Directed Li Plating

Myung-Hyun Ryou et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Article Chemistry, Multidisciplinary

In Situ Quantification and Visualization of Lithium Transport with Neutrons

Danny X. Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Article Nanoscience & Nanotechnology

Interconnected hollow carbon nanospheres for stable lithium metal anodes

Guangyuan Zheng et al.

NATURE NANOTECHNOLOGY (2014)

Article Multidisciplinary Sciences

Improving battery safety by early detection of internal shorting with a bifunctional separator

Hui Wu et al.

NATURE COMMUNICATIONS (2014)

Article Multidisciplinary Sciences

Defect-induced plating of lithium metal within porous graphene networks

Rahul Mukherjee et al.

NATURE COMMUNICATIONS (2014)

Article Chemistry, Multidisciplinary

The Li-Ion Rechargeable Battery: A Perspective

John B. Goodenough et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Article Multidisciplinary Sciences

A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries

Liumin Suo et al.

NATURE COMMUNICATIONS (2013)

Article Chemistry, Multidisciplinary

Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase

Siqi Shi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Review Chemistry, Physical

Challenges for Rechargeable Li Batteries

John B. Goodenough et al.

CHEMISTRY OF MATERIALS (2010)

Review Chemistry, Physical

The history of electrokinetic phenomena

Staffan Wall

CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2010)

Article Nanoscience & Nanotechnology

High-performance lithium battery anodes using silicon nanowires

Candace K. Chan et al.

NATURE NANOTECHNOLOGY (2008)

Review Chemistry, Physical

Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells

Uday Kasavajjula et al.

JOURNAL OF POWER SOURCES (2007)

Article Electrochemistry

Dendrite short-circuit and fuse effect on Li/polymer/Li cells

Michel Rosso et al.

ELECTROCHIMICA ACTA (2006)

Article Chemistry, Physical

Main aging mechanisms in Li ion batteries

M Broussely et al.

JOURNAL OF POWER SOURCES (2005)

Article Chemistry, Physical

Electrochemically lithiated graphite characterised by photoelectron spectroscopy

AM Andersson et al.

JOURNAL OF POWER SOURCES (2003)

Review Multidisciplinary Sciences

Issues and challenges facing rechargeable lithium batteries

JM Tarascon et al.

NATURE (2001)

Article Electrochemistry

Surface film formation on graphite negative electrode in lithium-ion batteries

SK Jeong et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)