4.6 Article

Interfacial strength and deformation mechanism of Ni/Co multilayers under uniaxial tension using molecular dynamics simulation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Physics, Condensed Matter

Strengthening mechanism of Al matrix composites reinforced by nickel-coated graphene: Insights from molecular dynamics simulation

R. Q. Han et al.

Summary: The study found through molecular dynamics simulation that the load transfer ability between graphene and metal matrix in Ni-coated graphene-reinforced aluminum matrix nano-multilayers can be improved by adjusting the layer thickness. Under certain layer thickness conditions, the mechanical properties of the material follow the Hall-Petch relation; with thinner thickness, the plastic strain strengthening effect is more significant.

PHYSICA B-CONDENSED MATTER (2021)

Article Engineering, Electrical & Electronic

Influences of grain size, alloy composition, and temperature on mechanical characteristics of Si100-xGex alloys during indentation process

Van-Trung Pham et al.

Summary: This study used molecular dynamics simulations to investigate the mechanical characteristics of Si100-xGex alloys during indentation, finding that single crystalline specimens have higher hardness, loading force, and Young's modulus compared to polycrystalline specimens. The results also showed that as grain size decreases, loading force and hardness decrease, and grain boundaries play a significant role in material deformation behavior. Increasing silicon content in the alloy compositions led to higher hardness and Young's modulus, while increasing temperature resulted in reduced hardness and Young's modulus due to increased atomic displacement and shear strain.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2021)

Article Nanoscience & Nanotechnology

The effect of local atomic configuration in high-entropy alloys on the dislocation behaviors and mechanical properties

Yu-Chia Yang et al.

Summary: High-entropy alloys (HEAs) are promising advanced structural materials due to their comprehensive properties. Local atomic configuration (LAC) in HEAs significantly influences dislocation motion, lattice friction, and critical shear stress, with introducing large-size atoms enhancing dislocation dynamics for strengthening and toughening.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Materials Science, Multidisciplinary

Atomic stick-slip behaviors and anisotropic deformations on a rough surface during GaN wafer polishing: A simulation study

Van-Thuc Nguyen et al.

Summary: This paper uses molecular dynamics simulation to study the polishing process of a diamond abrasive on a GaN workpiece surface, analyzing the effects of various motion parameters, abrasive sizes, and orientations on the surface. It is found that the stick-slip behavior of the abrasive crossing the asperity system causes periodic stress marks and structure changes on the surface.

THIN SOLID FILMS (2021)

Article Mechanics

Effects of void and inclusion sizes on mechanical response and failure mechanism of AlCrCuFeNi2 high-entropy alloy

Dinh-Quan Doan et al.

Summary: The study found that there is a critical value of mechanical parameters for samples with an inclusion size of 15 angstrom under tension, and increasing void size and decreasing strain rate lead to a decrease in mechanical parameters. Deformation behavior is influenced by voids and inclusions, with shear bands propagating at a 45-degree angle.

ENGINEERING FRACTURE MECHANICS (2021)

Article Multidisciplinary Sciences

Understanding porosity and temperature induced variabilities in interface, mechanical characteristics and thermal conductivity of borophene membranes

Van-Trung Pham et al.

Summary: Porosity and ambient temperature have significant impacts on the mechanical characteristics and thermal conductivity of borophene membranes, influencing fracture behavior and material properties. Increasing porosity results in decreased ultimate strength and Young's modulus of the borophene membrane, with stretching biaxially exhibiting more complex deformation behavior than uniaxial tension.

SCIENTIFIC REPORTS (2021)

Article Materials Science, Multidisciplinary

Microstructural evolution and mechanical properties of AlxCoCrFeNi high-entropy alloys under uniaxial tension: A molecular dynamics simulations study

Jun Jiang et al.

Summary: This study explores the microstructure evolution, deformation mechanism and mechanical properties of the AlxCoCrFeNi high-entropy alloy under uniaxial tension through molecular dynamics simulations. It was found that increasing Al concentration and temperature negatively impact the tensile properties, while an increase in strain rate significantly influences the yield stress and yield strain. The dislocation density decreases with temperature, but does not monotonically change with increasing strain rate.

MATERIALS TODAY COMMUNICATIONS (2021)

Article Materials Science, Multidisciplinary

Uniaxial tension deformation study of copper/nickel laminated composites: Effects of lamella number and interlamellar spacing

Yang Wang et al.

COMPUTATIONAL MATERIALS SCIENCE (2020)

Article Nanoscience & Nanotechnology

Size effects in strengthening of NiCo multilayers with modulated microstructures

Matthew Daly et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Chemistry, Physical

Work hardening mechanism based on molecular dynamics simulation in cutting Ni-Fe-Cr series of Ni-based alloy

YiHang Fan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Multidisciplinary

Effects of grain size and temperature on mechanical properties of nano-polycrystalline Nickel-cobalt alloy

Xuefeng Lu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Materials Science, Multidisciplinary

Molecular dynamics study of the tensile behaviors of Ti(0001)/Ni(111) multilayered nanowires

M. J. Su et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

Article Nanoscience & Nanotechnology

Molecular dynamics simulations on fracture toughness of Al2O3-SiO2 glass-ceramics

Binghui Deng et al.

SCRIPTA MATERIALIA (2019)

Article Materials Science, Multidisciplinary

Solidification dynamics and microstructure evolution in nanocrystalline cobalt

Dansong Zhang et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

Article Materials Science, Multidisciplinary

Atomistic phase field chemomechanical modeling of dislocation-solute-precipitate interaction in Ni-Al-Co

Jaber Rezaei Mianroodi et al.

ACTA MATERIALIA (2019)

Article Chemistry, Physical

Mechanical properties of silicon-germanium nanotubes: A molecular dynamics study

A. Dadrasi et al.

APPLIED SURFACE SCIENCE (2019)

Article Chemistry, Multidisciplinary

Tensile mechanical performance of Ni-Co alloy nanowires by molecular dynamics simulation

Xuefeng Lu et al.

RSC ADVANCES (2019)

Article Materials Science, Multidisciplinary

Atomic-scale simulation of structure and mechanical properties of Cu1-xAgx vertical bar Ni multilayer systems

Adrien Gola et al.

ACTA MATERIALIA (2018)

Article Materials Science, Multidisciplinary

Molecular dynamics simulation of effects of interface imperfections and modulation periods on Cu/Ta multilayers

Lu Lu et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Article Materials Science, Multidisciplinary

Size-dependent strength and interface-dominated deformation mechanisms of Cu/Zr multilayer nanofilms

Kuo-Chin Hsu et al.

RESULTS IN PHYSICS (2018)

Article

Molecular Dynamics Study of Uniaxial Tension of Au/Cu Multilayer Nanofilms

Cheng-Da Wu et al.

Journal of Computational and Theoretical Nanoscience (2017)

Article Nanoscience & Nanotechnology

Dependence of deformation mechanisms on layer spacing in multilayered Ti/Al composite

M. R. An et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Nanoscience & Nanotechnology

Molecular dynamics simulations of nanoindentation and scratch in Cu grain boundaries

Shih-Wei Liang et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Molecular dynamics study of tension-compression asymmetry of nanocrystal α-Ti with stacking fault

Minrong An et al.

MATERIALS & DESIGN (2017)

Article Materials Science, Multidisciplinary

MD simulation of effect of crystal orientations and substrate temperature on growth of Cu/Ni bilayer films

Tao Fu et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)

Article Chemistry, Physical

Non-localized deformation in Cu-Zr multi-layer amorphous films under tension

C. Zhong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Article Materials Science, Multidisciplinary

Strengthening effects of twin interface in Cu/Ni multilayer thin films - A molecular dynamics study

Shayuan Weng et al.

MATERIALS & DESIGN (2016)

Article Physics, Applied

Magnetic tunnel junctions using Co/Ni multilayer electrodes with perpendicular magnetic anisotropy

Ia Lytvynenko et al.

JOURNAL OF APPLIED PHYSICS (2015)

Article Materials Science, Multidisciplinary

Elastic, elastic-plastic properties of Ag, Cu and Ni nanowires by the bending test using molecular dynamics simulations

S. K. Deb Nath

COMPUTATIONAL MATERIALS SCIENCE (2014)

Review Physics, Multidisciplinary

How to identify dislocations in molecular dynamics simulations?

Li Duo et al.

SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2014)

Article Materials Science, Multidisciplinary

Mechanisms of anisotropic friction in nanotwinned Cu revealed by atomistic simulations

J. J. Zhang et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)

Article Nanoscience & Nanotechnology

In situ studies of irradiation-induced twin boundary migration in nanotwinned Ag

K. Y. Yu et al.

SCRIPTA MATERIALIA (2013)

Article Materials Science, Multidisciplinary

Molecular dynamics simulations of mechanical properties for Cu(001)/Ni(001) twist boundaries

S. D. Chen et al.

COMPUTATIONAL MATERIALS SCIENCE (2012)

Article Chemistry, Multidisciplinary

Mechanical Characterization of Co/Cu Multilayered Nanowires

J. C. Jimenez-Saez et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2012)

Article Materials Science, Multidisciplinary

Structure identification methods for atomistic simulations of crystalline materials

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)

Article Materials Science, Multidisciplinary

Twin boundary spacing-dependent friction in nanotwinned copper

Junjie Zhang et al.

PHYSICAL REVIEW B (2012)

Article Materials Science, Multidisciplinary

Mechanical properties of highly textured Cu/Ni multilayers

Y. Liu et al.

ACTA MATERIALIA (2011)

Article Materials Science, Multidisciplinary

Kinetics of the allotropic hcp-fcc phase transformation in cobalt

Rico Bauer et al.

PHILOSOPHICAL MAGAZINE (2011)

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

Article Engineering, Mechanical

A molecular dynamics study of void growth and coalescence in single crystal nickel

GP Potirniche et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2006)

Article Nanoscience & Nanotechnology

Microstructures and strength of nanoscale Cu-Ag multilayers

J McKeown et al.

SCRIPTA MATERIALIA (2002)

Article Materials Science, Multidisciplinary

Atomistic simulation of stacking fault tetrahedra formation in Cu

BD Wirth et al.

JOURNAL OF NUCLEAR MATERIALS (2000)