☆ 4.6 Article

Improving the mechanical properties of duplex Mg-Li-Zn alloy by mixed rolling processing

MATERIALS TODAY COMMUNICATIONS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Effect of Zn addition on the microstructure and mechanical properties of as-cast BCC Mg-11Li based alloys

Chuanqiang Li et al.

Summary: The addition of zinc has a significant impact on the microstructure and mechanical properties of as-cast BCC Mg-11Li based alloys, affecting the type and volume fraction of precipitated phases. Solid-solution treatment can enhance the mechanical properties of the alloy, but also results in a significant reduction in elongation.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Plastic deformation and heat treatment of Mg-Li alloys: a review

Xiang Peng et al.

Summary: Mg-Li alloys, as the lightest structural metallic materials, have a bright future in aerospace, weapon equipment, electronic technology, and transportation. The research focuses on the factors affecting plastic deformation, the impact of plastic deformation on microstructural evolution and mechanical properties, and the heat treatment behavior of Mg-Li alloys.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Origin of the age-hardening and age-softening response in Mg-Li-Zn based alloys

Hao Ji et al.

Summary: The origin of the age-hardening and age-softening response in Mg-10Li(-Zn)(-Er) alloys is studied. The age-hardening is attributed to the precipitation of the semi-coherent (Mg, Li)(3)Zn phase, while the age-softening is primarily caused by the gradual substitution of Mg atoms by Li/Zn atoms in the precipitate. The addition of Er retards the evolution of the (Mg, Li)(3)Zn precipitate, leading to a deceleration of age-softening in the alloy.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Reducing the yield asymmetry in Mg-5Li-3Al-2Zn alloy by hot-extrusion and multi-pass rolling

Xiaoqiang Li et al.

Summary: In this study, a Mg-5Li-3Al-2 Zn (LAZ532) alloy was successfully produced through hot-extrusion and multi-pass rolling, leading to grain refinement, improved mechanical properties, and reduced yield asymmetry. The presence of ultra-fine AlMg4Zn11 and nano Li3Al2 phases in the alloy was observed, contributing to the enhancement of comprehensive mechanical properties. Additionally, the combination of weak basal lamellar texture, grain refinement, and Li element addition effectively improved yield symmetry in the alloy.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of rolling ratios on the microstructural evolution and corrosion performance of an as-rolled Mg-8 wt.%Li alloy

B. J. Wang et al.

Summary: The influence of rolling ratios on microstructural changes and corrosion behavior of an as-rolled Mg-8 wt.%Li alloy in 0.1 mol/L NaCl solution was investigated. It was found that as the rolling ratio increased, the alpha-Mg phases elongated and fragmented, leading to decreased corrosion performance. The corrosion process can be divided into two stages, with initial corrosion mainly occurring in beta-Li phases and later transferring to the alpha-Mg phases.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Achieving ultra-strong Magnesium-lithium alloys by low-strain rotary swaging

Yue Yang et al.

Summary: This study introduced a new strengthening scheme of low deformation strain for metals and alloys by introducing massive twins and stacking faults in coarse grain interior through rotary swaging process. The researchers successfully prepared the strongest ultra-light Mg-Li alloy with a new strength record.

MATERIALS RESEARCH LETTERS (2021)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Research advances in magnesium and magnesium alloys worldwide in 2020

Yan Yang et al.

Summary: Research on magnesium alloys remains a significant focus, with a strong emphasis on microstructure control, mechanical properties, corrosion and protection, and functional magnesium materials. Future research will concentrate on synergistic microstructure control, development of functional materials, corrosion protection measures, and advanced processing technology improvements.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Chemistry, Physical

Role of extrusion temperature on the microstructure evolution and tensile properties of an ultralight Mg-Li-Zn-Er alloy

Hao Ji et al.

Summary: The extrusion temperature plays a significant role in refining the microstructure and affecting the tensile properties of ultralight Mg10Li-5Zn-0.5Er alloy. The increase in extrusion temperature leads to changes in grain size and distribution, as well as variations in strength and elongation.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Y and Ce on the microstructure, mechanical properties and anisotropy of as-rolled Mg-8Li-1Al alloy

Feng Zhong et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Slip behavior and its effect on rolling texture development in a dual-phase Mg-Li alloy

Fei Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strengthening a dual-phase Mg-Li alloy by strain-induced phase transformation at room temperature

Fei Guo et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Latest research advances on magnesium and magnesium alloys worldwide

Jiangfeng Song et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructural characteristics of AZ31 alloys rolled at room and cryogenic temperatures and their variation during annealing

Sang Won Lee et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

添加到收藏夹

Article Engineering, Civil

Superplastic deformation of Mg-9Li-2Al-0.5Sc alloy after grain refinement by KoBo extrusion and cyclic forging

Jan Dutkiewicz et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of rolling reduction and annealing process on microstructure and corrosion behavior of LZ91 alloy sheet

Li-na MA et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3A1-(1,2,3)Sn alloys

Xiao-yang Chen et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of annealing temperature on microstructure and mechanical properties of LZ91 alloy

Yan Yang et al.

MATERIALS SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Influence of Sm addition on microstructural and mechanical properties of as -extruded Mg-9Li-5Al alloy

Zhi Hu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Precipitation strengthening in an ultralight magnesium alloy

Song Tang et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A comprehensive study on the effect of heat treatment on the fracture behaviors and structural properties of Mg-Li alloys using RSM

M. Pahlavani et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Chemistry, Physical

Development of new age hardenable Mg-Li-Sc alloys

Jan Dutkiewicz et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Statistical optimization of stress level in Mg-Li-Al alloys upon hot compression testing

Rezawana Islam et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

A review: Past, present and future of grain refining of magnesium castings

Erdem Karakulak

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of Y and Ce addition on microstructures and mechanical properties of LZ91 alloys

By Qing Ji et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of cryogenic rolling process on microstructure and mechanical properties of Mg-14Li-1Al alloy

Hongyu Liu et al.

MATERIALS CHARACTERIZATION (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhancement of plastic anisotropy and drastic increase in yield stress of Mg-Li single crystals by Al-addition followed by quenching

Koji Hagihara et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of Er addition on microstructure and mechanical properties of as-cast Mg-10Li-5Zn alloy

Hao Ji et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties and microstructural evolution in a superlight Mg-7.28Li-2.19Al-0.091Y alloy fabricated by rolling

Furong Cao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Chemistry, Physical

Hot deformation behavior and processing map of a superlight dual-phase Mg-Li alloy

Gang Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Engineering, Industrial

Effects of Annealing Process on the Interface of Alternate α/β Mg-Li Composite Sheets Prepared by Accumulative Roll Bonding

Huajie Wu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Thermodynamics

Refinement effect of RE in light weight Mg-Li-Al alloys

Mariusz Krol et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of extruding temperature and heat treatment process on microstructure and mechanical properties of three structures containing Mg-Li alloy bars

Yan Tang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Chemistry, Physical

Dynamic Recrystallization Behavior and Corrosion Resistance of a Dual-Phase Mg-Li Alloy

Gang Liu et al.

MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Microstructural Evolution and Mechanical Properties in Superlight Mg-Li Alloy Processed by High-Pressure Torsion

Qian Su et al.

MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of composition and growth rate on the microstructure transformation of β-rods/lamellae/α-rods in directionally solidified Mg-Li alloy

Dan Liu et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Natural ageing responses of duplex structured Mg-Li based alloys

C. Q. Li et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Chemistry, Physical

Texture evolution and their effects on the mechanical properties of duplex Mg-Li alloy

Yun Zou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication of high strength α, α plus β, β phase containing Mg-Li alloys with 0.2%Y by extruding and annealing process

Yan Tang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Y content on microstructure and mechanical properties of as-cast Mg-8Li-3Al-2Zn alloy with duplex structure

Jiong Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and simulation study of a duplex Mg-Li alloy during Double Change Channel Angular Pressing

Guobing Wei et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Chemistry, Physical

Effect of aging temperature on precipitation behavior and mechanical properties of extruded AZ80-Ag alloy

Shilun Yu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of icosahedral phase on the thermal stability and ageing response of a duplex structured Mg-Li alloy

D. K. Xu et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of homogenization treatment on the microstructure and mechanical properties of Mg-8Li-3Al-Y alloy

Q. Z. Peng et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Li content on the indentation creep characteristics of cast Mg-Li-Zn alloys

R. Mahmudi et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent progress in magnesium-lithium alloys

R. Wu et al.

INTERNATIONAL MATERIALS REVIEWS (2015)

添加到收藏夹

Article Chemistry, Physical

Precipitation evolution and kinetics in a magnesium-neodymium-zinc alloy

A. Sanaty-Zadeh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Li addition on the mechanical behavior and texture of the as-extruded AZ31 magnesium alloy

Ruihong Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Chemistry, Physical

Effect of Y on microstructure and mechanical properties of duplex Mg-7Li alloys

Hanwu Dong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties of room temperature rolled MgLiAlZn alloy

Jian-Yih Wang

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties and microstructures of various Mg-Li alloys

Tien-Chan Chang et al.

MATERIALS LETTERS (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.