相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Thermally stable, adhesively strong graphene/polyimide films for inkjet printing ultrasound sensors
Pengyu Zhou et al.
CARBON (2021)
Healable Cellulose Iontronic Hydrogel Stickers for Sustainable Electronics on Paper
Ines Cunha et al.
ADVANCED ELECTRONIC MATERIALS (2021)
Highly viscoelastic, stretchable, conductive, and self-healing strain sensors based on cellulose nanofiber-reinforced polyacrylic acid hydrogel
Yue Jiao et al.
CELLULOSE (2021)
Understanding the sintering and heat dissipation behaviours of Cu nanoparticles during low-temperature selective laser sintering process on flexible substrates
Guannan Yang et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)
Review-Recent Progress in the Diversity of Inkjet-Printed Flexible Sensor Structures in Biomedical Engineering Applications
Hanim Hussin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)
Molecularly imprinted polymer grafted on paper and flat sheet for selective sensing and diagnosis: a review
Zahra Mamipour et al.
MICROCHIMICA ACTA (2021)
Overview of recent progress in electrohydrodynamic jet printing in practical printed electronics: focus on the variety of printable materials for each component
Hyeok-jin Kwon et al.
MATERIALS ADVANCES (2021)
A laser-engraved wearable sensor for sensitive detection of uric acid and tyrosine in sweat
Yiran Yang et al.
NATURE BIOTECHNOLOGY (2020)
High-Resolution Inkjet Printing of Quantum Dot Light-Emitting Microdiode Arrays
Peihua Yang et al.
ADVANCED OPTICAL MATERIALS (2020)
Water-Transferred, Inkjet-Printed Supercapacitors toward Conformal and Epidermal Energy Storage
Pavlos Giannakou et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Aerosol-Jet-Printed Graphene Immunosensor for Label-Free Cytokine Monitoring in Serum
Kshama Parate et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Inkjet Printing Controllable Polydopamine Nanoparticle Line Array for Transparent and Flexible Touch-Sensing Application
Liang Liu et al.
ADVANCED ENGINEERING MATERIALS (2020)
Comprehensive characterization of TiO2 inks and their application for inkjet printing of microstructures
D. Bugakova et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
Flexible PMOS Inverter and NOR Gate Using Inkjet-Printed Dual-Gate Organic Thin Film Transistors
Subhash Singh et al.
IEEE ELECTRON DEVICE LETTERS (2020)
A comprehensive study on the droplet formation processes and its influencing factors of a tubular piezoelectric print head
Jiaqing Chang et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2020)
Highly Conductive Graphene Electronics by Inkjet Printing
Dongbin Zhu et al.
JOURNAL OF ELECTRONIC MATERIALS (2020)
Annealing Temperature Dependence of ZTO Thin Film Properties and Its Application on Thin Film Transistors by Inkjet Printing
Sang Ouk Ryu et al.
JOURNAL OF ELECTRONIC MATERIALS (2020)
Multi-parameter paper sensor fabricated by inkjet-printed silver nanoparticle ink and PEDOT:PSS
Dimitris Barmpakos et al.
MICROELECTRONIC ENGINEERING (2020)
Strong adhesion of polyvinylpyrrolidone-coated copper nanoparticles on various substrates fabricated from well-dispersed copper nanoparticle inks
Shun Yokoyama et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)
An Inkjet-Printed Flexible Non-Enzymatic Lactate Sensor for Clinical Blood Plasma Test
Yi-Syuan Huang et al.
IEEE ELECTRON DEVICE LETTERS (2020)
Year 2020: A Snapshot of the Last Progress in Flexible Printed Gas Sensors
Ambra Fioravanti et al.
APPLIED SCIENCES-BASEL (2020)
Flexible ammonia sensor integrated with polyaniline/zinc oxide/graphene composite membrane materials
Chao-Yuan Ting et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2020)
Characterization of AuNPs based ink for inkjet printing of low cost paper based sensors
Mohammed Shariq et al.
MATERIALS LETTERS (2020)
Microstructural investigation of inkjet printed Cu(In,Ga)Se2 thin film solar cell with improved efficiency
Brijesh Singh Yadav et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Water-based highly conductive graphene inks for fully printed humidity sensors
Hui Ding et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)
Functional Metal Oxide Ink Systems for Drop-on-Demand Printed Thin-Film Transistors
Zhennan Zhu et al.
LANGMUIR (2020)
Fourier and Inverse Fourier Transform Model for Delayed Self-interferometry System
Ling Zhang et al.
IEEE PHOTONICS JOURNAL (2020)
On the Effect of Aging on Digital Sensors
Md Toufiq Hasan Anik et al.
2020 33RD INTERNATIONAL CONFERENCE ON VLSI DESIGN AND 2020 19TH INTERNATIONAL CONFERENCE ON EMBEDDED SYSTEMS (VLSID) (2020)
Water-Based Graphene Inks for All-Printed Temperature and Deformation Sensors
Miguel Franco et al.
ACS APPLIED ELECTRONIC MATERIALS (2020)
Understanding and mitigating process drift in aerosol jet printing
Rebecca R. Tafoya et al.
FLEXIBLE AND PRINTED ELECTRONICS (2020)
Review-Inkjet Printing of Metal Structures for Electrochemical Sensor Applications
Yongkun Sui et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Additive manufacturing for energy storage: Methods, designs and material selection for customizable 3D printed batteries and supercapacitors
Umair Gulzar et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2020)
Semiconductor water-based inks: Miniaturized NiO pseudocapacitor electrodes by inkjet printing
J. Yus et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film
Penghui Zhu et al.
LANGMUIR (2019)
Metallic Nanoparticle Inks for 3D Printing of Electronics
Hong Wei Tan et al.
ADVANCED ELECTRONIC MATERIALS (2019)
Fabrication of Large-Area Bimodal Sensors by All-Inkjet-Printing
Sheng Fu et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Disposable Sensors in Diagnostics, Food, and Environmental Monitoring
Can Dincer et al.
ADVANCED MATERIALS (2019)
Advanced Polymer Designs for Direct-Ink-Write 3D Printing
Longyu Li et al.
CHEMISTRY-A EUROPEAN JOURNAL (2019)
Disposable Biosensor Based on Amidase/CeO2/GNR Modified Inkjet-printed CNT Electrodes-droplet Based Paracetamol Detection in Biological Fluids for Point-of-care Applications
Dalibor M. Stankovic et al.
ELECTROANALYSIS (2019)
Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics
Lixin Mo et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)
A review of aerosol jet printing-a non-traditional hybrid process for micro-manufacturing
N. J. Wilkinson et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Bending reliability of flexible transparent electrode of gravure offset printed invisible silver-grid laminated with conductive polymer
Masato Ohsawa et al.
MICROELECTRONICS RELIABILITY (2019)
A flexible precise volume sensor based on metal-on-polyimide electrodes sandwiched by PDMS channel for microfluidic systems
Zhihua Pu et al.
MICROFLUIDICS AND NANOFLUIDICS (2019)
Flexible Insole Sensors with Stably Connected Electrodes for Gait Phase Detection
Wenzheng Heng et al.
SENSORS (2019)
Enhanced flexible room temperature ammonia sensor based on PEDOT: PSS thin film with FeCl3 additives prepared by inkjet printing
Dawu Lv et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
All-in-One Iontronic Sensing Paper
Sen Li et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Wearable Bandage-Based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering
Shweta Agarwala et al.
ACS SENSORS (2019)
A novel approach to a fully inkjet printed SnO2-based gas sensor on a flexible foil
Omar Kassem et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Inkjet Printing and Characterization of Titanium Dioxide and Platinum Electrodes For Dye-sensitized Solar Cells (DSSCs)
Chin-Tai Chen et al.
2019 IEEE 46TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2019)
A fully inkjet-printed transparent humidity sensor based on a Ti3C2/Ag hybrid for touchless sensing of finger motion
Ning Li et al.
NANOSCALE (2019)
A review on inkjet printing of nanoparticle inks for flexible electronics
Laxmidhar Nayak et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Polydopamine-collagen complex to enhance the biocompatibility of polydimethylsiloxane substrates for sustaining long-term culture of L929 fibroblasts and tendon stem cells
Qian Li et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Drop dynamics in the inkjet printing process
Herman Wijshoff
CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2018)
Non-enzymatic electrochemical lactate sensing by NiO and Ni(OH)2 electrodes: A mechanistic investigation
Sungjin Kim et al.
ELECTROCHIMICA ACTA (2018)
An inkjet printed Ag electrode fabricated on plastic substrate with a chemical sintering approach for the electrochemical sensing of hydrogen peroxide
Libo Shi et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Green Strategies for Molecularly Imprinted Polymer Development
Raquel Viveiros et al.
POLYMERS (2018)
A Handwriting Method for Low-Cost Gas Sensors
Florin C. Loghin et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Skin electronics from scalable fabrication of an intrinsically stretchable transistor array
Sihong Wang et al.
NATURE (2018)
A review on flexible gas sensors: From materials to devices
Rouba Alrammouz et al.
SENSORS AND ACTUATORS A-PHYSICAL (2018)
A fully inkjet-printed disposable glucose sensor on paper
Eloise Bihar et al.
NPJ FLEXIBLE ELECTRONICS (2018)
Principles of aerosol jet printing
Ethan B. Secor
FLEXIBLE AND PRINTED ELECTRONICS (2018)
Direct Printing of Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing With Silver Nanoinks
Hantang Qin et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Flexible small-channel thin-film transistors by electrohydrodynamic lithography
Yajiang Ding et al.
NANOSCALE (2017)
Highly stretchable polymer semiconductor films through the nanoconfinement effect
Jie Xu et al.
SCIENCE (2017)
Low-voltage, high-sensitivity and high-reliability bimodal sensor array with fully inkjet-printed flexible conducting electrode for low power consumption electronic skin
Kyungkwan Kim et al.
NANO ENERGY (2017)
Fabrication and electrical characterization of multi-layer capacitive touch sensors on flexible substrates by additive e-jet printing
Hantang Qin et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
A highly stretchable, transparent, and conductive polymer
Yue Wang et al.
SCIENCE ADVANCES (2017)
A review on inkjet printing of CNT composites for smart applications
Saeideh Kholghi Eshkalak et al.
APPLIED MATERIALS TODAY (2017)
Efficient All-Solution Processed Quantum Dot Light Emitting Diodes Based on Inkjet Printing Technique
Yang Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Inkjet-printed electrochemical sensors
Ana Moya et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2017)
Fully inkjet printed flexible resistive memory
B. Huber et al.
APPLIED PHYSICS LETTERS (2017)
Solution based zinc tin oxide TFTs: the dual role of the organic solvent
Daniela Salgueiro et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)
Inkjet-Printed Flexible Gold Electrode Arrays for Bioelectronic Interfaces
Yasser Khan et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Electrowetting Controls the Deposit Patterns of Evaporated Salt Water Nanodroplets
Jun Zhang et al.
LANGMUIR (2016)
Inkjet-printed bifunctional carbon nanotubes for pH sensing
Yiheng Qin et al.
MATERIALS LETTERS (2016)
Temperature sensor realized by inkjet printing process on flexible substrate
M. D. Dankoco et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2016)
3D nanostructured inkjet printed graphene via UV-pulsed laser irradiation enables paper-based electronics and electrochemical devices
Suprem R. Das et al.
NANOSCALE (2016)
Flexible and printable paper-based strain sensors for wearable and large-area green electronics
Xinqin Liao et al.
NANOSCALE (2016)
Large-scale assembly of highly sensitive Si-based flexible strain sensors for human motion monitoring
Bing-Chang Zhang et al.
NANOSCALE (2016)
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Wei Gao et al.
NATURE (2016)
All-inkjet-printed dissolved oxygen sensors on flexible plastic substrates
Ana Moya et al.
ORGANIC ELECTRONICS (2016)
Mechanical behavior of strain sensors based on PEDOT:PSS and silver nanoparticles inks deposited on polymer substrate by inkjet printing
Michela Borghetti et al.
SENSORS AND ACTUATORS A-PHYSICAL (2016)
Inkjet-printing deposition of silver electro-conductive layers on textile substrates at low sintering temperature by using an aqueous silver ions-containing ink for textronic applications
Z. Stempien et al.
SENSORS AND ACTUATORS B-CHEMICAL (2016)
Organic thin-film transistors fabricated using a slot-die-coating process and related sensing applications
Byoungchoo Park et al.
RSC ADVANCES (2016)
Temperature sensor realized by inkjet printing process on flexible substrate
M. D. Dankoco et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2016)
A Transparent, Smooth, Thermally Robust, Conductive Polyimide for Flexible Electronics
Joshua A. Spechler et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Selective laser sintering of Ag nanoparticles ink for applications in flexible electronics
I. Theodorakos et al.
APPLIED SURFACE SCIENCE (2015)
Coffee stains on paper
Azadeh Nilghaz et al.
CHEMICAL ENGINEERING SCIENCE (2015)
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Saleem Khan et al.
IEEE SENSORS JOURNAL (2015)
Colloidal Drop Deposition on Porous Substrates: Competition among Particle Motion, Evaporation, and Infiltration
Min Pack et al.
LANGMUIR (2015)
Inkjet printing of conductive polymer nanowire network on flexible substrates and its application in chemical sensing
Edward Song et al.
MICROELECTRONIC ENGINEERING (2015)
Tailoring nanoscale properties of tungsten oxide for inkjet printed electrochromic devices
Pawel Jerzy Wojcik et al.
NANOSCALE (2015)
Green ink in all colors-Printing ink from renewable resources
Tobias Robert
PROGRESS IN ORGANIC COATINGS (2015)
Recent advances in graphene based gas sensors
Seba S. Varghese et al.
SENSORS AND ACTUATORS B-CHEMICAL (2015)
Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing
M. Serdar Onses et al.
SMALL (2015)
Acoustic suppression of the coffee-ring effect
Dileep Mampallil et al.
SOFT MATTER (2015)
Direct patterning of gold nanoparticles using flexographic printing for biosensing applications
Jamie Benson et al.
NANOSCALE RESEARCH LETTERS (2015)
Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers
Juha Niittynen et al.
SCIENTIFIC REPORTS (2015)
Inkjet printed SnO2 gas sensor on plastic substrate
M. Rieu et al.
EUROSENSORS 2015 (2015)
An Inkjet Printed CO2 Gas Sensor
B. Ando et al.
EUROSENSORS 2015 (2015)
Anisotropic optical properties of large-scale aligned silver nanowire films via controlled coffee ring effects
Weiping Zhou et al.
RSC ADVANCES (2015)
Direct Intense Pulsed Light Sintering of Inkjet-Printed Copper Oxide Layers within Six Milliseconds
Hyunkyoo Kang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Gravure Printing of Graphene for Large-Area Flexible Electronics
Ethan B. Secor et al.
ADVANCED MATERIALS (2014)
Low temperature plasma sintering of silver nanoparticles
Siyuan Ma et al.
APPLIED SURFACE SCIENCE (2014)
New insight into the size-controlled synthesis of silver nanoparticles and its superiority in room temperature sintering
Yao Tang et al.
CRYSTENGCOMM (2014)
Thermoelectric Properties and Thermal Stability of PEDOT:PSS Films on a Polyimide Substrate and Application in Flexible Energy Conversion Devices
Masahiro Hokazono et al.
JOURNAL OF ELECTRONIC MATERIALS (2014)
A review of non-contact micro- and nano-printing technologies
Changhai Ru et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2014)
Biological Applications of Gold Nanoparticles
Monic Shah et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)
Laser sintering of copper nanoparticles
Michael Zenou et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
Electrostatic Suppression of the Coffee Stain Effect
Alexander W. Wray et al.
LANGMUIR (2014)
Inkjet printing of flexible high-performance carbon nanotube transparent conductive films by coffee ring effect
Allon Shimoni et al.
NANOSCALE (2014)
Coffee-ring effect-based simultaneous SERS substrate fabrication and analyte enrichment for trace analysis
Weidong Wang et al.
NANOSCALE (2014)
Room-temperature sintering of conductive Ag films on paper
Qijin Huang et al.
MATERIALS LETTERS (2014)
Enhanced printed temperature sensors on flexible substrate
A. Aliane et al.
MICROELECTRONICS JOURNAL (2014)
Flexible Carbon Nanotube Films for High Performance Strain Sensors
Olfa Kanoun et al.
SENSORS (2014)
Alternative sintering methods compared to conventional thermal sintering for inkjet printed silver nanoparticle ink
Juha Niittynen et al.
THIN SOLID FILMS (2014)
Personal electronics printing via tapping mode composite liquid metal ink delivery and adhesion mechanism
Yi Zheng et al.
SCIENTIFIC REPORTS (2014)
Fabrication of highly electrically conducting fine patterns via substrate-independent inkjet printing of mussel-inspired organic nano-material
Siyuan Ma et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Controllable fabrication of a flexible transparent metallic grid conductor based on the coffee ring effect
Zhiliang Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Controlled Inkjetting of a Conductive Pattern of Silver Nanoparticles Based on the Coffee-Ring Effect
Zhiliang Zhang et al.
ADVANCED MATERIALS (2013)
Wide Linear-Range Detecting Nonenzymatic Glucose Biosensor Based on CuO Nanoparticles Inkjet-Printed on Electrodes
Rafiq Ahmad et al.
ANALYTICAL CHEMISTRY (2013)
Enhanced colloidal monolayer assembly via vibration-assisted convective deposition
Tanyakorn Muangnapoh et al.
APPLIED PHYSICS LETTERS (2013)
High-resolution inkjet printing of electrically conducting lines of silver nanoparticles by edge-enhanced twin-line deposition
Vadim Bromberg et al.
APPLIED PHYSICS LETTERS (2013)
Patterning of controllable surface wettability for printing techniques
Dongliang Tian et al.
CHEMICAL SOCIETY REVIEWS (2013)
Contact angle hysteresis: a review of fundamentals and applications
H. B. Eral et al.
COLLOID AND POLYMER SCIENCE (2013)
Fully Printed, High Performance Carbon Nanotube Thin-Film Transistors on Flexible Substrates
Pak Heng Lau et al.
NANO LETTERS (2013)
Single-walled carbon nanotube networks for ethanol vapor sensing applications
Ilya V. Anoshkin et al.
NANO RESEARCH (2013)
Control of surface wettability for inkjet printing by combining hydrophobic coating and plasma treatment
Heung Yeol Park et al.
THIN SOLID FILMS (2013)
Electrical sintering characteristics of inkjet-printed conductive Ag lines on a paper substrate
Shin Jang et al.
THIN SOLID FILMS (2013)
Oven Sintering Process Optimization for Inkjet-Printed Ag Nanoparticle Ink
Eerik Halonen et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2013)
Inkjet Printed Fractal-Connected Electrodes with Silver Nanoparticle Ink
Mohammad Vaseem et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Humidity sensing properties of different single-walled carbon nanotube composite films fabricated by layer-by-layer self-assembly technique
Hongjun Jing et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2012)
Inkjet printing of silver citrate conductive ink on PET substrate
Xiaolei Nie et al.
APPLIED SURFACE SCIENCE (2012)
Inkjet printing of conductive materials: a review
Gerard Cummins et al.
CIRCUIT WORLD (2012)
Inkjet-printed gas sensors: metal decorated WO3 nanoparticles and their gas sensing properties
Jarmo Kukkola et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Optimization of inkjet printed PEDOT:PSS thin films through annealing processes
Zhaoting Xiong et al.
ORGANIC ELECTRONICS (2012)
Building microscopic soccer balls with evaporating colloidal fakir drops
Alvaro G. Marin et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
All additive inkjet printed humidity sensors on plastic substrate
F. Molina-Lopez et al.
SENSORS AND ACTUATORS B-CHEMICAL (2012)
Solderable and electroplatable flexible electronic circuit on a porous stretchable elastomer
Gi Seok Jeong et al.
NATURE COMMUNICATIONS (2012)
Conductive Inks with a Built-In Mechanism That Enables Sintering at Room Temperature
Michael Grouchko et al.
ACS NANO (2011)
On the Principles of Printing Sub-micrometer 3D Structures from Dielectric-Liquid-Based Colloids
Niklas C. Schirmer et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Paper Electronics
Daniel Tobjork et al.
ADVANCED MATERIALS (2011)
Impact of ink formulation on carbon nanotube network organization within inkjet printed conductive films
Aurore Denneulin et al.
CARBON (2011)
Mechanistic Studies on Sintering of Silver Nanoparticles
Steven K. Volkman et al.
CHEMISTRY OF MATERIALS (2011)
Graphene Sensors
Ernie W. Hill et al.
IEEE SENSORS JOURNAL (2011)
Contactless Electrical Sintering of Silver Nanoparticles on Flexible Substrates
Mark Allen et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2011)
Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors
Lu Huang et al.
NANO RESEARCH (2011)
Suppression of the coffee-ring effect by shape-dependent capillary interactions
Peter J. Yunker et al.
NATURE (2011)
Inkjet-printing of indium tin oxide (ITO) films for transparent conducting electrodes
Myun-sung Hwang et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2011)
Electronics with and on paper
R. Martins et al.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2011)
Organic inkjet-patterned memory array based on ferroelectric field-effect transistors
Tse Nga Ng et al.
ORGANIC ELECTRONICS (2011)
Layer-by-layer assembly carbon nanotubes thin film based gas sensors for ammonia detection
Sun Ping et al.
SCIENCE CHINA-INFORMATION SCIENCES (2011)
Suppressing the coffee stain effect: how to control colloidal self-assembly in evaporating drops using electrowetting
H. B. Eral et al.
SOFT MATTER (2011)
Electrical Transport and Field-Effect Transistors Using Inkjet-Printed SWCNT Films Having Different Functional Side Groups
Eduardo Gracia-Espino et al.
ACS NANO (2010)
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Shlomo Magdassi et al.
ACS NANO (2010)
Tunable Carbon Nanotube Thin-Film Transistors Produced Exclusively via Inkjet Printing
Haruya Okimoto et al.
ADVANCED MATERIALS (2010)
Inkjet Printing-Process and Its Applications
Madhusudan Singh et al.
ADVANCED MATERIALS (2010)
Gold nanoparticle ink suitable for electric-conductive pattern fabrication using in ink-jet printing technology
Wenjuan Cui et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2010)
Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials
Jolke Perelaer et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Minimal Size of Coffee Ring Structure
Xiaoying Shen et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2010)
Effect of aging on optical properties of bimetallic sensor chips
X. Chen et al.
OPTICS EXPRESS (2010)
Sintering of inkjet printed copper nanoparticles for flexible electronics
Seonhee Jang et al.
SCRIPTA MATERIALIA (2010)
Ink-jet printing of Cu conductive ink on flexible substrate modified by oxygen plasma treatment
Yong-Sung Goo et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Development of a gravure offset printing system for the printing electrodes of flat panel display
Taik-Min Lee et al.
THIN SOLID FILMS (2010)
Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability
Shlomo Magdassi et al.
MATERIALS (2010)
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Ingo Reinhold et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Inkjet printing and adhesion characterisation of conductive tracks on a commercial printed circuit board material
A. Sridhar et al.
THIN SOLID FILMS (2009)
Inkjet printing of narrow conductive tracks on untreated polymeric substrates
Thijs H. J. van Osch et al.
ADVANCED MATERIALS (2008)
Biological applications of gold nanoparticles
Ralph A. Sperling et al.
CHEMICAL SOCIETY REVIEWS (2008)
Development of ultrafine indium tin oxide (ITO) nanoparticle for ink-jet printing by low-temperature synthetic method
Sung-Jei Hong et al.
IEEE TRANSACTIONS ON NANOTECHNOLOGY (2008)
Inkjet-printed line morphologies and temperature control of the coffee ring effect
Dan Soltman et al.
LANGMUIR (2008)
Large area-aligned arrays from direct deposition of single-wall carbon nanotube inks
Trevor J. Simmons et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2007)
Ink-jet printing of carbon nanotube thin film transistors
P. Beecher et al.
JOURNAL OF APPLIED PHYSICS (2007)
Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions
Dongjo Kim et al.
APPLIED PHYSICS LETTERS (2006)
Ink-jet printing and microwave sintering of conductive silver tracks
Jolke Perelaer et al.
ADVANCED MATERIALS (2006)
The preparation of ZnO based gas-sensing thin films by ink-jet printing method
WF Shen et al.
THIN SOLID FILMS (2005)
An amperometric glucose biosensor prototype fabricated by thermal inkjet printing
L Setti et al.
BIOSENSORS & BIOELECTRONICS (2005)
Highly conductive ink jet printed films of nanosilver particles for printable electronics
D Kim et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)
Experimental study of the impact of an ink-jet printed droplet on a solid substrate
DB van Dam et al.
PHYSICS OF FLUIDS (2004)
Rapid self-assembly of monodisperse colloidal spheres in an ink-jet printed droplet
HY Ko et al.
CHEMISTRY OF MATERIALS (2004)
分享论文
