☆ 4.7 Article

Using PCM in buildings to reduce HVAC energy usage taking into account Saudi Arabia climate region

JOURNAL OF BUILDING ENGINEERING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Energy assessment of a roof-integrated phase change materials, long-term numerical analysis with experimental validation

Nahed Elawady et al.

Summary: The study investigated the long-term thermal behavior of building roofs with PCM layers, and found that using PCM in hot summers can decrease indoor heat flux and achieve indoor wall temperatures closer to indoor air temperature requirements. Additionally, thicker PCM layers resulted in better performance.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Large-scale fabrication of flexible EPDM/MXene/PW phase change composites with excellent light-to-thermal conversion efficiency via water-assisted melt blending

Hao Wu et al.

Summary: Thermal therapy based on phase change materials (PCMs) shows great promise in personal thermal care, with EMP based shape-stable phase change composites (SSPCCs) prepared via water-assisted melt blending showing improved light-to-thermal conversion efficiency. The EMP-0.8 SSPCCs exhibit high melting and freezing phase change enthalpies, with stable performance after multiple cycles, making them suitable for personal thermal therapy applications.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Materials Science, Composites

Ameliorating strength-ductility efficiency of graphene nanoplatelet-reinforced aluminum composites via deformation-driven metallurgy

Yuming Xie et al.

Summary: 1.5 wt% graphene nanoplatelet-reinforced aluminum matrix composites were prepared using deformation-driven metallurgy to enhance the strength-ductility efficiency. The study focused on the strengthening-toughening behaviors related to the dispersion of graphene nanoplatelets, interfacial bonding, and grain refinement. Severe plastic deformation and dynamic recrystallization resulted in the uniform dispersion of graphene nanoplatelets and ultra-fine microstructures. The composites showed high-efficiency interfacial bonding and achieved self-compensating spatial continuity through the automatic flow of Al2O3 nanodots.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Mathematics, Applied

Combined heat and mass transfer and thermodynamic irreversibilities in the stagnation-point flow of Casson rheological fluid over a cylinder with catalytic reactions and inside a porous medium under local thermal nonequilibrium

Rasool Alizadeh et al.

Summary: The study investigates the heat and mass transport from the surface of a cylinder coated with a catalyst and exposed to an impinging flow of a Casson rheological fluid. By introducing similarity variables, the governing equations are simplified and numerically solved to predict the hydrodynamic, temperature, concentration, and entropy generation fields.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2021)

添加到收藏夹

Article Thermodynamics

Sensitivity of AHU power consumption to PCM implementation in the wall-considering the solar radiation

Arya Nariman et al.

Summary: This study showed that incorporating phase change materials (PCM) into walls can effectively reduce heat transfer, especially in decreasing the cooling load of the air conditioning system in the interior space during summer months, leading to a significant reduction in the power consumption of the cooling coil.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Energy & Fuels

Loading PCM Into Buildings Envelope to Decrease Heat Gain-Performing Transient Thermal Analysis on Nanofluid Filled Solar System

Aslam Amirahmad et al.

Summary: Researchers have explored techniques to reduce energy consumption in buildings due to their high share in energy consumption and carbon dioxide emission. In a hot and arid climate region, adding PCM, combining absorption chiller with a solar system, and dispersing nanoparticles were used to reduce energy demand. Results showed that these techniques effectively reduced heat exchange between interior and exterior spaces in buildings and improved the performance of the solar system.

FRONTIERS IN ENERGY RESEARCH (2021)

添加到收藏夹

Article Energy & Fuels

Transient Thermal Analysis of a Solar-Assisted AHU by Focusing on Heat Recovery and Nanoparticles: Jeddah Climate Zone

Yacine Khetib

Summary: In the Jeddah climate region, energy consumption in the air handling unit (AHU) sector can be reduced effectively by using energy-efficient solutions such as precooling and heat recovery. The application of heat recovery units significantly reduces cooling coil power demand in summer, while incorporating solar collectors into the AHU also reduces the energy demand for heating coils.

FRONTIERS IN ENERGY RESEARCH (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Efficacy of incorporating PCM into the building envelope on the energy saving and AHU power usage in winter

Nidal H. Abu-Hamdeh et al.

Summary: This study examined the thermal performance of a PCM-based wall numerically for energy efficiency. The findings showed that installing PCM inside the envelope can reduce heat loss from the conditioned space and lead to energy savings in AHU usage.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2021)

添加到收藏夹

Article Thermodynamics

Fast estimation of the enthalpy-temperature function of Phase Change Materials

Jean-Luc Dauvergne et al.

Summary: This paper introduces a method for rapidly estimating the enthalpy-temperature function of Phase Change Materials (PCMs) using a simple experimental setup and reliable mathematical algorithm. The accuracy of the method was validated using distilled water as a reference PCM, showing good results. Additionally, the method was proven effective for PCMs undergoing progressive melting.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Using phase change material as an energy-efficient technique to reduce energy demand in air handling unit integrated with absorption chiller and recovery unit-Applicable for high solar-irradiance regions

Mashhour A. Alazwari et al.

Summary: In the study conducted in Saudi Arabia, the introduction of phase change material and recovery unit was found to significantly reduce energy usage in cooling systems, leading to substantial energy savings and efficiency improvements.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Engineering, Chemical

Investigating the performance of the PCM-integrated building envelope on a seasonal basis

Jingyi Guo et al.

Summary: The study investigated the performance of PCM wallboards under realistic weather conditions and solar radiation, revealing that the performance is highly dependent on key factors such as environmental conditions and volumetric amount. Additionally, optimal thickness values for PCM layers regarding costs and wall density were observed for different types of PCM, while the melting point also plays a significant role in energy-saving effects.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

添加到收藏夹

Article Engineering, Chemical

Integrating a nanofluid-based solar system with air handling unit to reduce energy usage: Case studies in Saudi Arabia

Adnan Khdair et al.

Summary: The study investigated the thermal behavior of nanofluid filled solar-assisted AHU and found that nanoparticles can increase annual collector effectiveness. Integrating a nanofluid-based solar system with AHU in July can significantly reduce energy demand.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

添加到收藏夹

Article Engineering, Chemical

Free convection and second law scrutiny of NEPCM suspension inside a wavy-baffle-equipped cylinder under altered Fourier theory

M. K. Nayak et al.

Summary: This study simulated the free convection and entropy generation of nano-encapsulated phase change material (NEPCM) inside a circular cold cylinder using the finite element method, considering the effects of magnetic field and heat flux model. Changes in baffle amplitude and magnetic field strength affect the movement of NEPCMs and entropy generation, while an increase in baffle size alters the flow patterns and velocities.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

添加到收藏夹

Article Energy & Fuels

Effects of examine the phase change material through applying the solar collectors: exergy analysis of an air handling unit equipped with the heat recovery unit

Mashhour A. Alazwari et al.

Summary: This article examines the efficiency of an air handling unit (AHU) equipped with a heat recovery unit (HRU) through energy and exergy analysis, finding that the use of phase change materials and solar systems can effectively reduce energy consumption caused by irreversible processes.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Total enthalpy-based lattice Boltzmann simulations of melting in paraffin/metal foam composite phase change materials

Maximilian Gaedtke et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Construction & Building Technology

Energy usage reduction in an air handling unit by incorporating two heat recovery units

Aysan Shahsavar Goldanlou et al.

JOURNAL OF BUILDING ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Development and thermal performance of nanoencapsulated PCM/plaster wallboard for thermal energy storage in buildings

Behzad Maleki et al.

JOURNAL OF BUILDING ENGINEERING (2020)

添加到收藏夹

Review Thermodynamics

A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage

Sara Rostami et al.

ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

Z. X. Li et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Energy & Fuels

Analysis of On-Board Photovoltaics for a Battery Electric Bus and Their Impact on Battery Lifespan

Kevin R. Mallon et al.

ENERGIES (2017)

添加到收藏夹

Article Engineering, Chemical

Theoretical investigation of entropy generation and heat transfer by forced convection of copper-water nanofluid in a porous channel - Local thermal non-equilibrium and partial filling effects

Mohsen Torabi et al.

POWDER TECHNOLOGY (2016)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.