相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Geopolymer as the future oil-well cement: A review
Stephen Adjei et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)
Evaluation of Qusaiba Kaolinitic Shale as a Supplementary Cementitious Material in Lightweight Oil-Well Cement Formulation
Stephen Adjei et al.
ACS OMEGA (2022)
Impact of Drilling Fluid Contamination on Performance of Rock-Based Geopolymers
E. Eid et al.
SPE JOURNAL (2021)
The Effect of Various Si/Al, Na/Al Molar Ratios and Free Water on Micromorphology and Macro-Strength of Metakaolin-Based Geopolymer
Hongguang Wang et al.
MATERIALS (2021)
Valorization of Geothermal Silica and Natural Bentonite through Geopolymerization: A Characterization Study and Response Surface Design
Himawan Tri Bayu Murti Petrus et al.
INTERNATIONAL JOURNAL OF TECHNOLOGY (2021)
Geopolymers as an alternative to Portland cement: An overview
N. B. Singh et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Microannulus Formation Mechanism at the Cementing Interface of a Thermal Recovery Well during Cyclic Steam Injection
JiWei Wu et al.
ADVANCES IN CIVIL ENGINEERING (2020)
Mineralogical and Thermal Characterization of Kaolinitic Clays from Terra Alta (Catalonia, Spain)
Maite Garcia-Valles et al.
MINERALS (2020)
Utilization of metakaolin-based geopolymer as a mud-cake solidification agent to enhance the bonding strength of oil well cement-formation interface
Yuhuan Bu et al.
ROYAL SOCIETY OPEN SCIENCE (2020)
Experimental evaluation of sustainable geopolymer mortars developed from loam natural soil
Muhammad Ramzan Abdul Karim et al.
JOURNAL OF ASIAN ARCHITECTURE AND BUILDING ENGINEERING (2020)
Predictive Model of Setting Times and Compressive Strengths for Low-Alkali, Ambient-Cured, Fly Ash/Slag-Based Geopolymers
Supphatuch Ukritnukun et al.
MINERALS (2020)
Investigating the expansion characteristics of geopolymer cement samples in a water bath and compared with the expansion of ASTM Class-G cement
Siti Humairah Bt Abd Rahman et al.
HELIYON (2020)
An Experimental Investigation of the Relative Strength of the Silica Polymorphs Quartz, Coesite, and Stishovite
Simon A. Hunt et al.
GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS (2019)
Carbonation of silica cement at high-temperature well conditions
Ruben Bjorge et al.
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2019)
Investigating geopolymer cement performance in presence of water based drilling fluid
Mohamed Ahdaya et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)
Evaluation of mechanical properties of cement slurries containing SBR latex subjected to high temperatures
Ramon Victor Alves Ramalho et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)
Influence of Na2O Content and Ms (SiO2/Na2O) of Alkaline Activator on Workability and Setting of Alkali-Activated Slag Paste
Sung Choi et al.
MATERIALS (2019)
Statistical Evaluation of Mechanical Properties of Slag Based Alkali-Activated Material
Martin Sisol et al.
SUSTAINABILITY (2019)
Nanoclay-modulated oxygen vacancies of metal oxide
Qihang Zhao et al.
COMMUNICATIONS CHEMISTRY (2019)
A geopolymer cementing system for oil wells subject to steam injection
Maria D. M. Paiva et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)
Physicochemical Characterization of Geopolymer Binders and Foams Made from Tunisian Clay
Imen Ben Messaoud et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Thermal Resistance Variations of Fly Ash Geopolymers: Foaming Responses
Heah Cheng-Yong et al.
SCIENTIFIC REPORTS (2017)
The Effect of Temperature Curing on Geopolymer Concrete
Triwulan et al.
ENGINEERING TECHNOLOGY INTERNATIONAL CONFERENCE 2016 (ETIC 2016) (2017)
Geopolymer materials based on natural zeolite
Aleksandar Nikolov et al.
CASE STUDIES IN CONSTRUCTION MATERIALS (2017)
Industrial calcination of kaolinitic clays to make reactive pozzolans
Roger S. Almenares et al.
CASE STUDIES IN CONSTRUCTION MATERIALS (2017)
Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers
Sanjay Kumar et al.
ADVANCED POWDER TECHNOLOGY (2017)
Review: Role of chemistry, mechanics, and transport on well integrity in CO2 storage environments
Susan Carroll et al.
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2016)
Development of Paper Sludge Ash-Based Geopolymer and Application to Treatment of Hazardous Water Contaminated with Radioisotopes
Zhuguo Li et al.
MATERIALS (2016)
Geopolymer as well cement and its mechanical integrity under deep down-hole stress conditions: application for carbon capture and storage wells
M. C. M. Nasvi et al.
GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2016)
Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration
Adrian Alujas et al.
APPLIED CLAY SCIENCE (2015)
The effects of SiO2/Na2O molar ratio on the characteristics of alkali-activated waste catalyst-metakaolin based geopolymers
Hui Cheng et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Effect of different mix compositions on apparent carbon dioxide (CO2) permeability of geopolymer: Suitability as well cement for CO2 sequestration wells
M. C. M. Nasvi et al.
APPLIED ENERGY (2014)
Effect of elevated temperature on the properties of geopolymer synthesized from calcined ore-dressing tailing of bauxite and ground-granulated blast furnace slag
Jiayuan Ye et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Mechanical behaviour of wellbore materials saturated in brine water with different salinity levels
M. C. M. Nasvi et al.
ENERGY (2014)
Effect of temperature on permeability of geopolymer: A primary well sealant for carbon capture and storage wells
M. C. M. Nasvi et al.
FUEL (2014)
The permeability of geopolymer at down-hole stress conditions: Application for carbon dioxide sequestration wells
M. C. M. Nasvi et al.
APPLIED ENERGY (2013)
Microstructural and strength evolutions of geopolymer composite reinforced by resin exposed to elevated temperature
Yao Jun Zhang et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2012)
Geopolymer as well cement and the variation of its mechanical behavior with curing temperature
Mohamed M. C. Nasvi et al.
GREENHOUSE GASES-SCIENCE AND TECHNOLOGY (2012)
Thermal treatment of kaolin: effect on the pozzolanic activity
A. Tironi et al.
11TH INTERNATIONAL CONGRESS ON METALLURGY & MATERIALS SAM/CONAMET 2011 (2012)
Thermal analysis of a white calcium bentonite
Hale Bayram et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2010)
Comparison of surface properties between kaolin and metakaolin in concentrated lime solutions
K. L. Konan et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2009)
Effect of calcium silicate sources on geopolymerisation
Christina K. Yip et al.
CEMENT AND CONCRETE RESEARCH (2008)
Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures
Daniel L. Y. Kong et al.
CEMENT AND CONCRETE RESEARCH (2007)
Geopolymer technology:: the current state of the art
P. Duxson et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Understanding the relationship between geopolymer composition, microstructure and mechanical properties
P Duxson et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)
The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation
CK Yip et al.
CEMENT AND CONCRETE RESEARCH (2005)
Industrially interesting approaches to low-CO2 cements
E Gartner
CEMENT AND CONCRETE RESEARCH (2004)
The effects of inorganic salt contamination on the strength and durability of geopolymers
WKW Lee et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2002)
Effects of dosage and modulus of water glass on early hydration of alkali-slag cements
D Krizan et al.
CEMENT AND CONCRETE RESEARCH (2002)