相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials
Sumit Bahl et al.
INTERNATIONAL MATERIALS REVIEWS (2021)
Critical role of scan strategies on the development of microstructure, texture, and residual stresses during laser powder bed fusion additive manufacturing
Naresh Nadammal et al.
ADDITIVE MANUFACTURING (2021)
Enhanced biomechanical performance of additively manufactured Ti-6Al-4V bone plates
Saurabh Kumar Gupta et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Review of recent developments in surface nanocrystallization of metallic biomaterials
Srijan Acharya et al.
NANOSCALE (2021)
Oligocrystalline microstructure in an additively manufactured biocompatible Ti-Nb-Zr-Ta alloy
Rodolfo Lisboa Batalha et al.
MATERIALS LETTERS (2020)
Influence of alloying elements on cellular response and in-vitro corrosion behavior of titanium-molybdenum-chromium alloys for implant materials
Nor Haliza Mat-Baharin et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2020)
A review of technological improvements in laser-based powder bed fusion of metal printers
AmirMahyar Khorasani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Processing a biocompatible Ti-35Nb-7Zr-5Ta alloy by selective laser melting
Rodolfo Lisboa Batalha et al.
JOURNAL OF MATERIALS RESEARCH (2020)
Surface Functionalization of Biomedical Ti-6Al-7Nb Alloy by Liquid Metal Dealloying
Ilya Vladimirovich Okulov et al.
NANOMATERIALS (2020)
Processing parameters in laser powder bed fusion metal additive manufacturing
J. P. Oliveira et al.
MATERIALS & DESIGN (2020)
Assessing the Material-Dependent Stress Distribution in Fractured Bone and Orthopedic Fixing Plate by Finite Element Analysis
Y. Naidubabu et al.
ADVANCES IN MATERIALS AND MANUFACTURING ENGINEERING, ICAMME 2019 (2020)
A novel approach to achieving a low Young's modulus in titanium-based metallic glasses
Jia-Peng Luo et al.
EMERGING MATERIALS RESEARCH (2019)
Study of the influence of Zr on the mechanical properties and functional response of Ti-Nb-Ta-Zr-O alloy for orthopedic applications
Srijan Acharya et al.
MATERIALS & DESIGN (2019)
Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application
H. Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Review on titanium and titanium based alloys as biomaterials for orthopaedic applications
Manmeet Kaur et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Selective laser melting additive manufacturing of pure tungsten: Role of volumetric energy density on densification, microstructure and mechanical properties
Meng Guo et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness
Rushikesh Sabban et al.
ACTA MATERIALIA (2019)
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
Niloofar Sanaei et al.
MATERIALS & DESIGN (2019)
Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material
Maria Watroba et al.
MATERIALS & DESIGN (2019)
New aspects about the search for the most relevant parameters optimizing SLM materials
Tatiana Mishurova et al.
ADDITIVE MANUFACTURING (2019)
A comparison of bacterial adhesion and biofilm formation on commonly used orthopaedic metal implant materials: An In vitro study
Rajesh Malhotra et al.
INDIAN JOURNAL OF ORTHOPAEDICS (2019)
Microstructural adjustments and mechanical properties of a cold-rolled biomedical near -Ti alloy sheet
Xi-Qun Ma et al.
RARE METALS (2018)
Additive manufacturing of titanium alloys in the biomedical field: processes, properties and applications
Francesco Trevisan et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2018)
Deformation mechanism and mechanical properties of a thermomechanically processed beta Ti-28Nb-35.4Zr alloy
Sertan Ozan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Engineering the next-generation tin containing β titanium alloys with high strength and low modulus for orthopedic applications
Sumit Bahl et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys
I. Okulov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A Review of Metastable Beta Titanium Alloys
R. Prakash Kolli et al.
METALS (2018)
Surface Severe Plastic Deformation of an Orthopedic Ti-Nb-Sn Alloy Induces Unusual Precipitate Remodeling and Supports Stem Cell Osteogenesis through Akt Signaling
Sumit Bahl et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Surface Severe Plastic Deformation of an Orthopedic Ti-Nb-Sn Alloy Induces Unusual Precipitate Remodeling and Supports Stem Cell Osteogenesis through Akt Signaling
Sumit Bahl et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
T. Mukherjee et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Predictive model for porosity in powder-bed fusion additive manufacturing at high beam energy regime
G. Vastola et al.
ADDITIVE MANUFACTURING (2018)
Residual Stress in Selective Laser Melted Inconel 718: Influence of the Removal from Base Plate and Deposition Hatch Length
Tobias Thiede et al.
MATERIALS PERFORMANCE AND CHARACTERIZATION (2018)
The selection of process parameters in additive manufacturing for aerospace alloys
Mostafa Yakout et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Dimensionless numbers in additive manufacturing
T. Mukherjee et al.
JOURNAL OF APPLIED PHYSICS (2017)
Laser and Electron Beam Additive Manufacturing Methods of Fabricating Titanium Bone Implants
Bartlomiej Wysocki et al.
APPLIED SCIENCES-BASEL (2017)
Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718
Naresh Nadammal et al.
MATERIALS & DESIGN (2017)
Novel bioactive materials developed by simulated body fluid evaluation: Surface-modified Ti metal and its alloys
Tadashi Kokubo et al.
ACTA BIOMATERIALIA (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Biomedical titanium alloys with Young's moduli close to that of cortical bone
Mitsuo Niinomi et al.
REGENERATIVE BIOMATERIALS (2016)
Microstructure characterization and property tailoring of a biomedical Ti-19Nb-1.5Mo-4Zr-8Sn alloy
Weifeng Wan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The present and future of additive manufacturing in the aerospace sector: A review of important aspects
Adrian Uriondo et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2015)
Biocompatibility evaluation of novel β-type titanium alloy (Ti-35Nb-7Zr-5Ta)98Si2 in vitro
Yu Sun et al.
RSC ADVANCES (2015)
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
K. N. Amato et al.
ACTA MATERIALIA (2012)
Balling behavior of stainless steel and nickel powder during selective laser melting process
Ruidi Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Cytotoxicity study of some Ti alloys used as biomaterial
Tatiani A. G. Donato et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2009)
Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation
S. J. Li et al.
ACTA BIOMATERIALIA (2008)
Application of dimensional analysis to selective laser melting
Maarten van Elsen et al.
RAPID PROTOTYPING JOURNAL (2008)
Production of new titanium alloy for orthopedic implants
EB Taddei et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2004)
Biocompatibility of β-stabilizing elements of titanium alloys
E Eisenbarth et al.
BIOMATERIALS (2004)
分享论文
