The hot compressive deformation behavior of cast Mg-Gd-Y-Zn-Zr alloys with and without LPSO phase in their initial microstructures

Samples of Mg-8.2Gd-3.8Y-1.1Zn-0.4Zr alloy with and without an intragranular lamellae-shaped long period stacking ordered (LPSO) phase were prepared through heat treatment and a series of hot compression tests on these materials were conducted to examine and evaluate the influence of LPSO on the hot compressive deformation behavior and deformation mechanisms at a given alloy composition. The values of activation energy for plastic flow (Qc) of the solution treated (without LPSO phase) and annealed alloys (with intragranular LPSO phase) were larger than that for pure Mg, indicating that the presence of a high amount of rare earth (RE) elements and LPSO in the Mg matrix significantly increases Qc. The Qc value of the annealed alloy was larger than that of the solution treated alloy at all the strain levels (223.3 vs. 195.5 kJ/mol in average) and the largest difference in Qc between the two alloys was recorded at the smallest strain of 0.1 where precipitation of LPSO during deformation was limited in the solution treated alloy. These observations imply that the formation of LPSO phase out of the RE-rich solid solution matrix during deformation increases Qc, but the increment is not so large. Analysis of the hot compressive data of the alloys with LPSO phase and the alloys with RE-rich solid solution matrix in literatures indicates the similarity of the effect of the LPSO and RE-rich solid solution matrix phases on Qc and high-temperature strength.(c) 2022 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University

Automated summary

This study investigates the influence of intragranular lamellae-shaped long period stacking ordered (LPSO) phase on the hot compressive deformation behavior and deformation mechanisms of Mg-8.2Gd-3.8Y-1.1Zn-0.4Zr alloy. The results show that the presence of LPSO phase increases the activation energy for plastic flow (Qc) and affects the deformation behavior and high-temperature strength of the alloy.