相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Alloy design via additive manufacturing: Advantages, challenges, applications and perspectives
Amit Bandyopadhyay et al.
MATERIALS TODAY (2022)
Translation of 3D printed materials for medical applications
Amit Bandyopadhyay et al.
MRS BULLETIN (2022)
Inconel 718-W7Ni3Fe bimetallic structures using directed energy deposition-based additive manufacturing
C. Groden et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2022)
Advances in additive manufacturing of metal-based functionally graded materials
Ashley Reichardt et al.
INTERNATIONAL MATERIALS REVIEWS (2021)
Microstructures and mechanical behavior of the bimetallic additively-manufactured structure (BAMS) of austenitic stainless steel and Inconel 625
Md R. U. Ahsan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
On the formation of Fish-scale morphology with curved grain interfacial microstructures during selective laser melting of dissimilar alloys
Liming Yao et al.
ACTA MATERIALIA (2021)
Plasticity and fracture behavior of Inconel 625 manufactured by laser powder bed fusion: Comparison between as-built and stress relieved conditions
Shipin Qin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Influence of Compositionally Graded Interface on Microstructure and Compressive Deformation of 316L Stainless Steel to Al12Si Aluminum Alloy Bimetallic Structures
Yanning Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Bimetallic structure of Ti6Al4V and Al6.21Cu fabricated by cold metal transfer additive manufacturing via Nb interlayer added by TIG
Naiqiang Xu et al.
MATERIALS LETTERS (2021)
Characterization of AA7075/AA5356 gradient transition zone in an electron beam wire-feed additive manufactured sample
V Utyaganova et al.
MATERIALS CHARACTERIZATION (2021)
3D Printing in alloy design to improve biocompatibility in metallic implants
Indranath Mitra et al.
MATERIALS TODAY (2021)
Review on effect of heat input for wire arc additive manufacturing process
Nor Ana Rosli et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Combined effects of porosity and stress state on the failure behavior of laser powder bed fusion stainless steel 316L
Alexander E. Wilson-Heid et al.
ADDITIVE MANUFACTURING (2021)
Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds
Norberto Jimenez-Mena et al.
ENGINEERING FRACTURE MECHANICS (2021)
Designing high-temperature oxidation-resistant titanium matrix composites via directed energy deposition-based additive manufacturing
Kellen D. Traxel et al.
MATERIALS & DESIGN (2021)
Powder-based laser hybrid additive manufacturing of metals: a review
Amaia Jimenez et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Investigation of copper/stainless steel multi-metallic materials fabricated by laser metal deposition
Xinchang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effect of parameters on microstructure and mechanical property of dissimilar joints between 316L stainless steel and GH909 alloy by laser welding
Lin Chen et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Opportunities and challenges in additive manufacturing of functionally graded metallic materials via powder-fed laser directed energy deposition: A review
M. Ansari et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Nature-inspired materials and structures using 3D Printing
Amit Bandyopadhyay et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion
S. L. Sing et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Influence of the groove shape on welding residual stresses in P92/SUS304 dissimilar metal butt-welded joints
Suo Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Joining of dissimilar metals using microwave hybrid heating and Tungsten Inert Gas welding-A review
Sanjeel R. Naik et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Optical micrograph and micro-hardness behavior of dissimilar welded joints of aluminum (Al 6061-T6) and stainless steel (SS 304) with friction crush welding
Prem Singh et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Laser additive manufacturing of bimetallic structure from Ti-6Al-4V to Ti-48Al-2Cr-2Nb via vanadium interlayer
Zhanqi Liu et al.
MATERIALS LETTERS (2020)
In-situ dual wire arc additive manufacturing of NiTi-coating on Ti6Al4V alloys: Microstructure characterization and mechanical properties
Jun Wang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Microstructural investigation and mechanical behavior of a two-material component fabricated through selective laser melting of AlSi10Mg on an Al-Cu-Ni-Fe-Mg cast alloy substrate
Amir Hadadzadeh et al.
ADDITIVE MANUFACTURING (2020)
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Lei Yan et al.
ADDITIVE MANUFACTURING (2020)
Influence of in situ ceramic reinforcement towards tailoring titanium matrix composites using laser-based additive manufacturing
Kellen D. Traxel et al.
ADDITIVE MANUFACTURING (2020)
Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, residual stress and property gradients
S. C. Bodner et al.
ADDITIVE MANUFACTURING (2020)
Heat-treatment effects on a bimetallic additively-manufactured structure (BAMS) of the low-carbon steel and austenitic-stainless steel
Md. R. U. Ahsan et al.
ADDITIVE MANUFACTURING (2020)
Additive manufacturing of multiple materials by selective laser melting: Ti-alloy to stainless steel via a Cu-alloy interlayer
Cher Fu Tey et al.
ADDITIVE MANUFACTURING (2020)
Tribological investigation of additive manufacturing medical Ti6Al4V alloys against Al2O3 ceramic balls in artificial saliva
Jiang Ju et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Influence mechanism of process parameters on the interfacial characterization of selective laser melting 316L/CuSn10
Jie Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Recent developments in metal additive manufacturing
Amit Bandyopadhyay et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
Fabrication and performance studies on explosively welded CuCrZr/316L bimetallic plate applied in extreme environments
Junfeng Xu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Microstructural evolution and high temperature resistance of functionally graded material Ti-6Al-4V/Inconel 718 coated by directed Chock for energy deposition-laser
Shuwei Ji et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Technology advancements for channel wall nozzle manufacturing in liquid rocket engines
Paul R. Gradl et al.
ACTA ASTRONAUTICA (2020)
Eliminating the crack of laser 3D printed functionally graded material from TA15 to Inconel718 by base preheating
Chun Shang et al.
OPTICS AND LASER TECHNOLOGY (2020)
Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers
G. H. S. F. L. Carvalho et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Enhanced interface strength in steel-nickel bimetallic component fabricated using wire arc additive manufacturing with interweaving deposition strategy
Bintao Wu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Explosive welding of Al alloys and high strength duplex stainless steel by controlling energetic conditions
Xiang Chen et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes
Zhe Sun et al.
ADDITIVE MANUFACTURING (2020)
Interface engineering of additively manufactured maraging steel-H13 bimetallic structures
Sajad Shakerin et al.
MATERIALS CHARACTERIZATION (2020)
Additive manufacturing of copper-tool steel dissimilar joining: Experimental characterization and thermal modeling
Xinchang Zhang et al.
MATERIALS CHARACTERIZATION (2020)
Additive manufacturing of copper-H13 tool steel bi-metallic structures via Ni-based multi-interlayer
Xinchang Zhang et al.
ADDITIVE MANUFACTURING (2020)
Wire-arc additive manufacturing of nickel aluminum bronze/stainless steel hybrid parts - Interfacial characterization, prospects, and problems
C. Dharmendra et al.
MATERIALIA (2020)
Selective laser melting of tungsten-copper functionally graded material
Chaolin Tan et al.
MATERIALS LETTERS (2019)
Improvement of densification and microstructure of ASTM A131 EH36 steel samples additively manufactured via selective laser melting with varying laser scanning speed and hatch spacing
Jingjing Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and mechanical properties of CuSn/18Ni300 bimetallic porous structures manufactured by selective laser melting
Mingkang Zhang et al.
MATERIALS & DESIGN (2019)
Inconel-steel functionally bimetal materials by hybrid directed energy deposition and thermal milling: Microstructure and mechanical properties
Pengfei Li et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Interfacial microstructure and mechanical. properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting
Jie Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Fatigue life and microstructure of additive manufactured Ti6Al4V after different finishing processes
L. Denti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
An Al-7Si alloy/cast iron bimetallic composite with super-high shear strength
Zhilin Guo et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Heat treatment effects on Inconel 625 components fabricated by wire plus arc additive manufacturing (WAAM)-part 1: microstructural characterization
A. N. M. Tanvir et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Interfacial characterization and mechanical properties of 316L stainless steel/inconel 718 manufactured by selective laser melting
Xinliang Mei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Additive manufacturing of functionally graded materials: A review
Chi Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Multiphysics modeling of phase transformation and microhardness evolution in laser direct deposited Ti6Al4V
Shunyu Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Influence of deposition orientation on fatigue response of LENS™ processed Ti6Al4V
Amit Bandyopadhyay et al.
MATERIALS LETTERS (2019)
Laser additive manufacturing of TA15-Inconel 718 bimetallic structure via Nb/Cu multi-interlayer
Chun Shang et al.
VACUUM (2019)
Aluminum with dispersed nanoparticles by laser additive manufacturing
Ting-Chiang Lin et al.
NATURE COMMUNICATIONS (2019)
Influence of trace boron addition on microstructure, tensile properties and their anisotropy of Ti6Al4V fabricated by laser directed energy deposition
Aitang Xue et al.
MATERIALS & DESIGN (2019)
Wall thickness distribution of Cu-Al bimetallic tube based on free bending process
Xunzhong Guo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
In situ alloying of elemental Al-Cu12 feedstock using selective laser melting
Rafael Martinez et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Hybrid additive manufacturing of Al-Ti6Al4V functionally graded materials with selective laser melting and cold spraying
Shuo Yin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Compositionally graded magnetic-nonmagnetic bimetallic structure using laser engineered net shaping
Bryan Heer et al.
MATERIALS LETTERS (2018)
Additive manufacturing of multi-material structures
Amit Bandyopadhyay et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
Tribocorrosion behavior of additive manufactured Ti-6Al-4V biomedical alloy
M. Buciumeanu et al.
TRIBOLOGY INTERNATIONAL (2018)
Direct fabrication of compositionally graded Ti-Al2O3 multi-material structures using Laser Engineered Net Shaping
Yanning Zhang et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing of Inconel 718-Copper alloy bimetallic structure using laser engineered net shaping (LENS™)
Bonny Onuike et al.
ADDITIVE MANUFACTURING (2018)
An overview of functionally graded additive manufacturing
Giselle Hsiang Loh et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing of Inconel 718-Ti6Al4V bimetallic structures
Bonny Onuike et al.
ADDITIVE MANUFACTURING (2018)
Narrow gap multi-pass laser butt welding of explosion welded CP-Ti/Q23513 bimetallic sheet by using a copper interlayer
Jie Ning et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Gradient effect in the waved interfacial layer of 304L/533B bimetallic plates induced by explosive welding
Lili Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanical and microstructure analysis of AA6061 and Ti6Al4V fiber laser butt weld
Giuseppe Casalino et al.
OPTIK (2017)
Analysis of SiC nano-powder effects on friction stir welding of dissimilar Al-Mg alloy to A316L stainless steel
A. A. Fallahi et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
K. G. Prashanth et al.
MATERIALS RESEARCH LETTERS (2017)
Thermal-structural analysis of regeneratively-cooled thrust chamber wall in reusable LOX/Methane rocket engines
Jiawen Song et al.
CHINESE JOURNAL OF AERONAUTICS (2017)
Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations
Lourdes D. Bobbio et al.
ACTA MATERIALIA (2017)
Micro-milling machinability of DED additive titanium Ti-6Al-4V
Giuseppe Bonaiti et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Characterization of diffusion-bonded titanium alloy and 304 stainless steel with Ag as an interlayer
M. Balasubramanian
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling
Beth E. Carroll et al.
ACTA MATERIALIA (2016)
Hybrid additive and subtractive machine tools - Research and industrial developments
Joseph M. Flynn et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Dissimilar metal deposition with a stainless steel and nickel-based alloy using wire and arc-based additive manufacturing
Takeyuki Abe et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)
Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing
Ashley Reichardt et al.
MATERIALS & DESIGN (2016)
Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting
Xipeng Tan et al.
ACTA MATERIALIA (2015)
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
Donghong Ding et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
An experimental and simulation study on build thickness dependent microstructure for electron beam melted Ti-6Al-4V
Xipeng Tan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Galina Kasperovich et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing
John Schmelzle et al.
JOURNAL OF MECHANICAL DESIGN (2015)
Experimental investigations of fracture and fatigue crack growth of copper-steel joints arc welded using nickel-base filler
M. Velu et al.
MATERIALS & DESIGN (2015)
Interfacial characterization of SLM parts in multi-material processing: Intermetallic phase formation between AlSi10Mg and C18400 copper alloy
S. L. Sing et al.
MATERIALS CHARACTERIZATION (2015)
Atomic-size effect and solid solubility of multicomponent alloys
Zhijun Wang et al.
SCRIPTA MATERIALIA (2015)
Microstructure and mechanical properties of dissimilar Al-Cu joints by friction stir welding
Qiu-zheng Zhang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Yong Huang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Stainless steel to titanium bimetallic structure using LENS (TM)
Himanshu Sahasrabudhe et al.
ADDITIVE MANUFACTURING (2015)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
An investigation on microstructures and mechanical properties of explosive cladded C103 niobium alloy over C263 nimonic alloy
P. Mastanaiah et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Compositionally graded metals: A new frontier of additive manufacturing
Douglas C. Hofmann et al.
JOURNAL OF MATERIALS RESEARCH (2014)
In situ synthesized TiB-TiN reinforced Ti6Al4V alloy composite coatings: Microstructure, tribological and in-vitro biocompatibility
Mitun Das et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Microstructure and interface characterization of dissimilar friction stir welded lap joints between Ti-6Al-4V and AISI 304
Kaio Niitsu Campo et al.
MATERIALS & DESIGN (2014)
Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel
Shuhai Chen et al.
MATERIALS & DESIGN (2014)
Dissimilar pulsed Nd:YAG laser welding of pure niobium to Ti-6Al-4V
M. J. Torkamany et al.
MATERIALS & DESIGN (2014)
Interfacial characterization of SLM parts in multi-material processing: Metallurgical diffusion between 316L stainless steel and C18400 copper alloy
Z. H. Liu et al.
MATERIALS CHARACTERIZATION (2014)
On the Texture Formation of Selective Laser Melted Ti-6Al-4V
Marco Simonelli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures
A. Mertens et al.
POWDER METALLURGY (2014)
Experimental Study of Direct Laser Deposition of Ti-6Al-4V and Inconel 718 by Using Pulsed Parameters
Kamran Shah et al.
SCIENTIFIC WORLD JOURNAL (2014)
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Douglas C. Hofmann et al.
SCIENTIFIC REPORTS (2014)
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
F. Otto et al.
ACTA MATERIALIA (2013)
Impact of temperature on shear strength of single lap Al-Cu bimetallic joint
Robert Uscinowicz
COMPOSITES PART B-ENGINEERING (2013)
Evolution of microstructures and mechanical properties during dissimilar electron beam welding of titanium alloy to stainless steel via copper interlayer
I. Tomashchuk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of phase transformation and intermetallic compounds on the microstructure and tensile strength properties of diffusion-bonded joints between Ti-6Al-4V and AISI 304L
T. Vigraman et al.
MATERIALS & DESIGN (2012)
Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer
Peng Li et al.
MATERIALS CHARACTERIZATION (2012)
Fabrication and microstructure characterization of selective laser-melted FeAl intermetallic parts
Bo Song et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
E. Yasa et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications
Hui-Chi Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Interface microstructure and strength properties of Ti-6Al-4V and microduplex stainless steel diffusion bonded joints
S. Kundu et al.
MATERIALS & DESIGN (2011)
Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: Evaluation of mechanical properties
M. Khalid Imran et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Review: friction stir welding tools
R. Rai et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Direct laser processing of a tantalum coating on titanium for bone replacement structures
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2010)
Evolution of Interface Microstructure and Mechanical Properties of Titanium/304 Stainless Steel Diffusion Bonded Joint Using Nb Interlayer
Sukumar Kundu et al.
ISIJ INTERNATIONAL (2010)
Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping
Felix A. Espana et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
Low cost integration of additive and subtractive processes for hybrid layered manufacturing
K. P. Karunakaran et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2010)
Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer
A. Elrefaey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
High strength bonding of titanium to stainless steel using an Ag interlayer
Jung G. Lee et al.
JOURNAL OF NUCLEAR MATERIALS (2009)
An experimental and theoretical study of gas tungsten arc welding of stainless steel plates with different sulfur concentrations
S. Mishra et al.
ACTA MATERIALIA (2008)
Solid-solution phase formation rules for multi-component alloys
Yong Zhang et al.
ADVANCED ENGINEERING MATERIALS (2008)
Infrared brazing of Ti-6Al-4V and 17-4 PH stainless steel with (Ni)/Cr barrier layer(s)
R. K. Shiue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Recent advances in friction-stir welding - Process, weldment structure and properties
R. Nandan et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Effects of intermetallic phases on the bond strength of diffusion-bonded joints between titanium and 304 stainless steel using nickel interlayer
S. Kundu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Parametric analysis of the selective laser melting process
I. Yadroitsev et al.
APPLIED SURFACE SCIENCE (2007)
Applications of a hybrid manufacturing process for fabrication of metallic structures
Frank Liou et al.
RAPID PROTOTYPING JOURNAL (2007)
Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features
A. Simchi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Interfacial microstructure and mechanical properties of diffusion-bonded titanium-stainless steel joints using a nickel interlayer
S. Kundu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Hybrid adaptive layer manufacturing: An Intelligent art of direct metal rapid tooling process
S Akula et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2006)
Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer
S Kundu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Development of nickel-titanium graded composition components
MS Domack et al.
RAPID PROTOTYPING JOURNAL (2005)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Laser deposition of compositionally graded titanium-vanadium and titanium-molybdenum alloys
PC Collins et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Strain energy distribution in ceramic-to-metal joints
JW Park et al.
ACTA MATERIALIA (2002)
Diffusion bonding of a microduplex stainless steel to Ti-6Al-4V
N Orhan et al.
SCRIPTA MATERIALIA (2001)
A comparative evaluation of welding consumables for dissimilar welds between 316LN austenitic stainless steel and Alloy 800
M Sireesha et al.
JOURNAL OF NUCLEAR MATERIALS (2000)