☆ 4.6 Review

Tribo-informatics approaches in tribology research: A review

FRICTION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Computer Science, Interdisciplinary Applications

A generalized artificial intelligence model for estimating the friction angle of clays in evaluating slope stability using a deep neural network and Harris Hawks optimization algorithm

Hong Zhang et al.

Summary: In this study, a new artificial intelligence model was proposed for predicting the friction angle of clays from different areas. Through various tests and comparisons, it was found that this model can accurately predict the friction angle of clays from different regions.

ENGINEERING WITH COMPUTERS (2022)

添加到收藏夹

Article Engineering, Mechanical

Triboinformatics Approach for Friction and Wear Prediction of Al-Graphite Composites Using Machine Learning Methods

Md Syam Hasan et al.

Summary: Data-driven analysis and machine learning algorithms were used to predict the coefficient of friction and wear-rate of self-lubricating aluminum graphite composites. Graphite content and hardness were found to be the most significant variables for predicting the friction behavior.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Engineering, Mechanical

Identification of abnormal tribological regimes using a microphone and semi-supervised machine-learning algorithm

Vigneashwara Pandiyan et al.

Summary: Traditional offline surface inspections lead to significant wasted machine time, while utilizing machine learning algorithms combined with sensor features for real-time classification shows better results, but there is an issue with unbalanced datasets during model training. A method is proposed to differentiate abnormal wear regimes by only familiarizing ML algorithms with the distribution of acoustic emission signals related to the normal wear regime, achieving high accuracy during validation, which can effectively enable real-time condition monitoring and wear prediction.

FRICTION (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Modeling of friction stir welding of aviation grade aluminium alloy using machine learning approaches

Shubham Verma et al.

Summary: This study applies machine learning approaches to analyze and predict the tensile behavior of friction stir welded AA6082. Random forest regression is found to be the best performing method, and rotational speed is identified as the most influencing factor for ultimate tensile strength.

INTERNATIONAL JOURNAL OF MODELLING AND SIMULATION (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A novel artificial intelligence technique for analyzing slope stability using PSO-CA model

Zhenyan Luo et al.

Summary: This study proposed a new artificial intelligence model, the PSO-CA technique, for predicting FS in slope stability of open-pit mines, which was applied to quarry data in Vietnam. By comparing with other models, the results showed that the PSO-CA technique had higher accuracy in estimating slope stability.

ENGINEERING WITH COMPUTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Machine-learning methods to predict the wetting properties of iron-based composites

Amir Kordijazi et al.

Summary: The study found that droplet size has no significant impact on CA, while composition, surface roughness, and time interval show correlations with CA. Surface roughness was identified as the main predictor of CA, with the low coefficient of determination in linear regression analysis indicating non-linearity.

SURFACE INNOVATIONS (2021)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation and prediction of tribological behavior of unidirectional short castor oil fiber reinforced epoxy composites

Rajesh Egala et al.

Summary: The study introduced a newly developed natural fiber, castor oil fiber, in tribo-composites and compared the performance of different fiber lengths in epoxy resin composites. Results showed that the composite with 5 mm fiber length exhibited the best tribological properties. The study also predicted the tribological behavior of composites using regression and artificial neural network models, with multi hidden layer ANN being the most accurate predictor.

FRICTION (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Predicting tool wear size across multi-cutting conditions using advanced machine learning techniques

Yan Shen et al.

Summary: This study introduces a framework for monitoring the health of cutting tools under multi-cutting conditions, using advanced machine learning methods and dynamic smoothing scheme to develop a predictive model. Experimental results show a high agreement between the predictions and experiments in terms of prediction trends and accuracy of the averaged root mean squared error values.

JOURNAL OF INTELLIGENT MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machine Learning and Statistical Approach to Predict and Analyze Wear Rates in Copper Surface Composites

Titus Thankachan et al.

Summary: This research applies machine learning models and statistical methods to predict and analyze the dry sliding wear rates of novel copper-based surface composites. Experimental and statistical analysis confirms that the presence of boron nitride particles can significantly reduce wear rates, with the worn-out surface exhibiting different wear modes under varying load conditions. Additionally, an artificial neural network model with a 4-7-1 topology demonstrates good agreement between predicted and experimental outcomes.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Artificial Intelligence Applications for Friction Stir Welding: A Review

Berkay Eren et al.

Summary: Advancements in artificial intelligence (AI) have allowed for its widespread application in various industrial processes, with friction stir welding (FSW) being a prominent area. AI techniques have been found to be crucial in decision-making, especially in determining input parameters for achieving desired output values in FSW.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Artificial neural network and multi-criterion decision making approach of designing a blend of biodegradable lubricants and investigating its tribological properties

Shubrajit Bhaumik et al.

Summary: The study found that the newly proposed blend showed a reduced coefficient of friction and comparable extreme pressure performance to commercial mineral oil. Compared to other lubricants, the proposed blend exhibited less wear and surface damage.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Machine learning classification-based approach for mechanical properties of friction stir welding of copper

Shivraman Thapliyal et al.

Summary: This study employed machine learning models to analyze the impact of process parameters on the mechanical properties of friction stir welded copper joints, with the neural network model achieving the highest accuracy of 94%. The machine learning model suggested that tool features and design were the most important parameters influencing the joint's mechanical properties.

MANUFACTURING LETTERS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Machine learning cutting force, surface roughness, and tool life in high speed turning processes

Yun Zhang et al.

Summary: The study develops Gaussian process regression models to predict three cutting parameters in high speed turning processes, which are highly stable and accurate, promising for fast, robust, and low-cost cutting parameter estimations.

MANUFACTURING LETTERS (2021)

添加到收藏夹

Article Engineering, Chemical

The investigation of the effect of particle size on wear performance of AA7075/Al2O3 composites using statistical analysis and different machine learning methods

Fatih Aydin

Summary: Particle size and load are crucial factors influencing the wear performance of 7075-Al2O3 composites. A larger particle size and higher load lead to better wear resistance, with the 15 μm particle size composite showing the best performance. Machine learning models like ELM have high accuracy in predicting wear behavior for Al matrix composites.

ADVANCED POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Data-driven wear monitoring for sliding bearings using acoustic emission signals and long short-term memory neural networks

F. Koenig et al.

Summary: This study aims to identify an appropriate monitoring technique and demonstrate the potential of data-driven wear monitoring. Through the use of Acoustic Emission (AE) technique and data-driven method, wear-critical mixed friction and hydrodynamic regime can be effectively distinguished and monitored, achieving real-time wear monitoring for sliding bearings.

WEAR (2021)

添加到收藏夹

Review Chemistry, Physical

Research methods of contact electrification: Theoretical simulation and experiment

Zhinan Zhang et al.

Summary: This paper systematically reviews the generation process of TENGs and the research methods of CE, providing an important reference for current triboelectric researchers to develop efficient research methods.

NANO ENERGY (2021)

添加到收藏夹

Article Engineering, Industrial

ForceNet: An offline cutting force prediction model based on neuro-physical learning approach

Ke Xu et al.

Summary: Accurate cutting force prediction is crucial for the optimization of numerically controlled machining processes. This paper introduces ForceNet, a cutting force prediction model that incorporates elementary physical priori into structured neural networks to predict cutting force for end-milling processes with complex CWE. Preliminary results show that ForceNet outperforms existing methods in both prediction accuracy and data efficiency.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

添加到收藏夹

Article Engineering, Mechanical

Machine learning based anomaly detection and classification of acoustic emission events for wear monitoring in sliding bearing systems

F. Koenig et al.

Summary: The study aims to monitor and classify the multi-variant wear behavior of sliding bearings using acoustic emission (AE) technique and deep learning based on convolutional neural networks. It successfully achieved high accuracy and sensitivity in detecting three-body abrasion due to particle contamination.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Automated 3D ferrograph image analysis for similar particle identification with the knowledge-embedded double-CNN model

Shuo Wang et al.

Summary: The paper proposes a wear debris analysis method based on Ferrograph, utilizing a knowledge-embedded doubleCNN model to identify fatigue and severe sliding particles using 3D topographical information. This approach successfully addresses the issues of lack of fault particle samples and conflicts among redundant features, resulting in accurate identification of these particles.

WEAR (2021)

添加到收藏夹

Article Engineering, Mechanical

Artificial intelligence-based predictive model of nanoscale friction using experimental data

Marko Percic et al.

Summary: A recent study systematically characterized nanoscale friction in technological thin films using machine learning algorithms, improving prediction accuracy and providing an effective tool for further scientific and technological nanotribological analyses.

FRICTION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Predictive Analysis of Wettability of Al-Si Based Multiphase Alloys and Aluminum Matrix Composites by Machine Learning and Physical Modeling

Amir Kordijazi et al.

Summary: The wetting of multiphase alloys and their composites is influenced by various factors, which are difficult to predict solely based on first principles. Through experimental, theoretical, and machine learning approaches, correlations between composition, surface finish, microstructure, and water contact angle were studied. Machine learning models showed better accuracy in predicting wetting behavior compared to theoretical models.

LANGMUIR (2021)

添加到收藏夹

Article Mechanics

A Data-Driven Framework for Buckling Analysis of Near-Spherical Composite Shells Under External Pressure

Mitansh Doshi et al.

Summary: This paper introduces a data-driven framework that accurately predicts buckling loads of composite near-spherical shells under external pressure. By using machine learning model trained on finite element simulation data, the efficiency and accuracy of the framework are demonstrated. This method enables users without access to powerful computational resources to easily predict the buckling loads of near-spherical shells.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Running-in real-time wear generation under vary working condition based on Gaussian process regression approximation

Renaldy Dwi Nugraha et al.

Summary: This study proposes a data-driven approach based on Gaussian process regression approximation to analyze the acquired data in real-time lubricant monitoring operation. The approach aims to create new knowledge on the understanding of real-time wear generation, with a focus on investigating running-in processes with abnormal data. The experimental setup and the approach used in this study show promising results in investigating running-in real-time wear generation.

MEASUREMENT (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Bandgap prediction of two-dimensional materials using machine learning

Yu Zhang et al.

Summary: The study applies machine learning algorithms to predict the bandgaps of 2D materials based on the computational 2D materials database. Results show that gradient boosted decision trees and random forests are more effective in predicting bandgaps, while support vector regression and multi-layer perceptron also show some predictive capabilities. Through ML prediction, high precision properties of 2D materials can be rapidly obtained.

PLOS ONE (2021)

添加到收藏夹

Article Engineering, Mechanical

Triboinformatic modeling of dry friction and wear of aluminum base alloys using machine learning algorithms

Md Syam Hasan et al.

Summary: Data-driven methods, including machine learning algorithms, were used to study the friction and wear of aluminum alloys, demonstrating satisfactory predictive performance. Among the ML models tested, Random Forest performed best in predicting wear rates while K Nearest Neighbor exhibited the best performance in predicting coefficients of friction.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Research on tool wear prediction based on temperature signals and deep learning

Zhaopeng He et al.

Summary: Tool condition monitoring is crucial for efficient tool life utilization, production improvement, and cost reduction. A deep learning method using temperature signals was proposed to predict tool wear accurately. The experimental results showed that the proposed model outperformed traditional methods in terms of prediction accuracy and stability.

WEAR (2021)

添加到收藏夹

Article Engineering, Chemical

Lifetime Prediction Using a Tribology-Aware, Deep Learning-Based Digital Twin of Ball Bearing-Like Tribosystems in Oil and Gas

Prathamesh S. Desai et al.

Summary: This study explores the use of machine learning for predicting the remaining useful life of lubrication systems in oil and gas plants, utilizing deep learning and tribological data from sensors for more accurate predictions and improved overall efficiency of components.

PROCESSES (2021)

添加到收藏夹

Review Engineering, Mechanical

Current Trends and Applications of Machine Learning in Tribology-A Review

Max Marian et al.

Summary: Machine learning and artificial intelligence are being increasingly used in tribology to sort through patterns and identify trends. Research covers various fields in tribology, from composite materials to lubricants, utilizing diverse applications and algorithms. This review aims to introduce and discuss the current trends and applications of ML and AI in the field, providing inspiration and support for researchers and engineers.

LUBRICANTS (2021)

添加到收藏夹

Article Engineering, Mechanical

A Digital Twin for Friction Prediction in Dynamic Rubber Applications with Surface Textures

Valentina Zambrano et al.

Summary: Surface texturing is an effective method to reduce friction without changing materials. In this study, surface textures were transferred to rubber samples using a novel laser surface texturing-based production process. The friction measurements were combined with Reduced Order Modelling to predict friction outcomes and find optimized dimple parameters. This approach allows industrial producers to improve product quality by optimizing textures and controlling surface texture tolerances before production.

LUBRICANTS (2021)

添加到收藏夹

Article Engineering, Mechanical

The Use of Artificial Intelligence in Tribology-A Perspective

Andreas Rosenkranz et al.

Summary: This article introduces the application of artificial intelligence and machine learning in the field of tribology, highlighting recent advances and successful case studies using artificial neural networks. These methods demonstrate accurate and efficient prediction of tribological characteristics, with future research directions emphasizing the extended use of artificial intelligence and machine learning concepts.

LUBRICANTS (2021)

添加到收藏夹

Article Engineering, Mechanical

Tribo-informatics: Concept, architecture, and case study

Zhinan Zhang et al.

Summary: Friction is crucial in various aspects of modern society, and the diversity and dispersion of tribology information pose challenges to its preservation and circulation. The combination of information technology with tribology research enhances research efficiency and optimizes the research process in this field.

FRICTION (2021)

添加到收藏夹

Article Engineering, Chemical

Artificial intelligence (AI)-based friction factor models for large piping networks

Nusrat Parveen et al.

CHEMICAL ENGINEERING COMMUNICATIONS (2020)

添加到收藏夹

Article Materials Science, Composites

Design of the ultrahigh molecular weight polyethylene composites with multiple nanoparticles: An artificial intelligence approach

A. Vinoth et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Prediction of Friction Coefficients During Scratch Based on an Integrated Finite Element and Artificial Neural Network Method

Haibo Xie et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Article Engineering, Mechanical

Tool wear prediction in hard turning of EN8 steel using cutting force and surface roughness with artificial neural network

S. K. Thangarasu et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Ferrograph Analysis With Improved Particle Segmentation and Classification Methods

Shuo Wang et al.

JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Direct detection of wear conditions by classification of ferrograph images

Jingqiu Wang et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Machine learning-based wear fault diagnosis for marine diesel engine by fusing multiple data-driven models

Xiaojian Xu et al.

KNOWLEDGE-BASED SYSTEMS (2020)

添加到收藏夹

Article Chemistry, Analytical

Identification of Road-Surface Type Using Deep Neural Networks for Friction Coefficient Estimation

Eldar Sabanovic et al.

SENSORS (2020)

添加到收藏夹

Article Engineering, Mechanical

Prediction of wear loss quantities of ferro-alloy coating using different machine learning algorithms

Osman Altay et al.

FRICTION (2020)

添加到收藏夹

Article Engineering, Mechanical

A new physics-based data-driven guideline for wear modelling and prediction of train wheels

Yuanchen Zeng et al.

WEAR (2020)

添加到收藏夹

Article Chemistry, Physical

Triboelectric Nanogenerator (TENG)-Sparking an Energy and Sensor Revolution

Zhong Lin Wang

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Review Engineering, Mechanical

Triboelectric nanogenerators: Fundamental physics and potential applications

Linglin Zhou et al.

FRICTION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machine learning based hierarchy of causative variables for tool failure in friction stir welding

Y. Du et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Automation & Control Systems

Transient Thermography for Flaw Detection in Friction Stir Welding: A Machine Learning Approach

Mohamed Atwya et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)

添加到收藏夹

Article Automation & Control Systems

Simple machine learning allied with data-driven methods for monitoring tool wear in machining processes

Adalto de Farias et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

tribAIn-Towards an Explicit Specification of Shared Tribological Understanding

Patricia Kuegler et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Mechanical

Using Machine Learning Radial Basis Function (RBF) Method for Predicting Lubricated Friction on Textured and Porous Surfaces

Guido Boidi et al.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2020)

添加到收藏夹

Article Engineering, Manufacturing

An intelligent prediction model of the tool wear based on machine learning in turning high strength steel

Minghui Cheng et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2020)

添加到收藏夹

Article Engineering, Mechanical

Automated assessment of gear wear mechanism and severity using mould images and convolutional neural networks

Haichuan Chang et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Review Chemistry, Physical

Practice of Simulation and Life Cycle Assessment in Tribology-A Review

Abdulaziz Kurdi et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Industrial

Physics guided neural network for machining tool wear prediction

Jinjiang Wang et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machine Learning Decomposition Onset Temperature of Lubricant Additives

Yun Zhang et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Physical Model Based on Data-Driven Analysis of Chemical Composition Effects of Friction Stir Welding

J. Y. Li et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tool Wear and Material Removal Predictions in Micro-EDM Drilling: Advantages of Data-Driven Approaches

Mattia Bellotti et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Chemistry, Physical

Data-driven modeling of wetting angle and corrosion resistance of hypereutectic cast Aluminum-Silicon alloys based on physical and chemical properties of surface

Amir Kordijazi et al.

SURFACES AND INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Artificial Intelligence Aided Design of Microtextured Surfaces: Application to Controlling Wettability

Andres Diaz Lantada et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

WP-DRnet: A novel wear particle detection and recognition network for automatic ferrograph image analysis

Yeping Peng et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Design of Alumina Reinforced Aluminium Alloy Composites with Improved Tribo-Mechanical Properties: A Machine Learning Approach

Titov Banerjee et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2020)

添加到收藏夹

Article Chemistry, Analytical

Artificial Intelligence and fourier-transform infrared spectroscopy for evaluating water-mediated degradation of lubricant oils

Christian Chimeno-Trinchet et al.

TALANTA (2020)

添加到收藏夹

Article Engineering, Mechanical

Friction and Wear Monitoring Methods for Journal Bearings of Geared Turbofans Based on Acoustic Emission Signals and Machine Learning

Noushin Mokhtari et al.

LUBRICANTS (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Artificial intelligence design charts for predicting friction capacity of driven pile in clay

Hossein Moayedi et al.

NEURAL COMPUTING & APPLICATIONS (2019)

添加到收藏夹

Article Engineering, Mechanical

Assessing the effectiveness of data-driven time-domain condition indicators in predicting the progression of surface distress under rolling contact

K. Gouda et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

WearGP: A computationally efficient machine learning framework for local erosive wear predictions via nodal Gaussian processes

Anh Tran et al.

WEAR (2019)

添加到收藏夹

Article Engineering, Mechanical

Predicting the polyethylene wear rate in pin-on-disc experiments in the context of prosthetic hip implants: Deriving a data-driven model using machine learning methods

A. Borjali et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Mechanical

Restoration of defocused ferrograph images using a large kernel convolutional neural network

Hongkun Wu et al.

WEAR (2019)

添加到收藏夹

Article Engineering, Mechanical

Relevance vector machine for tool wear prediction

Dongdong Kong et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Prediction of Surface Treatment Effects on the Tribological Performance of Tool Steels Using Artificial Neural Networks

Liborio Cavaleri et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Chemistry, Physical

Conditions for void formation in friction stir welding from machine learning

Yang Du et al.

NPJ COMPUTATIONAL MATERIALS (2019)

添加到收藏夹

Article

Automated Classification of Tribological Faults of Alternative Systems with the Use of Unsupervised Artificial Neural Networks

Marco Antonio Leandro Cabral et al.

Journal of Computational and Theoretical Nanoscience (2019)

添加到收藏夹

Article Engineering, Civil

Revisiting the Estimation of Colebrook Friction Factor: A Comparison between Artificial Intelligence Models and C-W based Explicit Equations

Majid Niazkar

KSCE JOURNAL OF CIVIL ENGINEERING (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Deep heterogeneous GRU model for predictive analytics in smart manufacturing: Application to tool wear prediction

Jinjiang Wang et al.

COMPUTERS IN INDUSTRY (2019)

添加到收藏夹

Article Engineering, Manufacturing

On material separation and cutting force prediction in micro milling through involving the effect of dead metal zone

Min Wan et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Monitoring of friction stir welding based on vision system coupled with Machine learning algorithm

S. Sudhagar et al.

MEASUREMENT (2019)

添加到收藏夹

Article Automation & Control Systems

Hybrid data-driven physics-based model fusion framework for tool wear prediction

Houman Hanachi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Prediction of cutting tool wear during milling process using artificial intelligence techniques

S. Shankar et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Mechanical

Tribological behaviour diagnostic and fault detection of mechanical seals based on acoustic emission measurements

Hossein Towsyfyan et al.

FRICTION (2019)

添加到收藏夹

Article Engineering, Mechanical

Artificial intelligence based design of multiple friction modifiers dispersed castor oil and evaluating its tribological properties

Shubrajit Bhaumik et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Manufacturing

Data-driven smart manufacturing: Tool wear monitoring with audio signals and machine learning

Zhixiong Li et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Proceedings Paper Engineering, Industrial

A hybrid approach using machine learning to predict the cutting forces under consideration of the tool wear

Bingxiao Peng et al.

17TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (17TH CIRP CMMO) (2019)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Machine learning classification for tool life modeling using production shop-floor tool wear data

Jaydeep Karandikar

47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)

添加到收藏夹

Review Engineering, Mechanical

Artificial Neural Networks (ANNs) as a Novel Modeling Technique in Tribology

Ivan Argatov

FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND (2019)

添加到收藏夹

Article Engineering, Mechanical

Artificial Neural Network-Based Analysis of the Tribological Behavior of Vegetable Oil-Diesel Fuel Mixtures

Costel Humelnicu et al.

LUBRICANTS (2019)

添加到收藏夹

Review Engineering, Mechanical

Multi-Scale Surface Texturing in Tribology-Current Knowledge and Future Perspectives

Philipp G. Gruetzmacher et al.

LUBRICANTS (2019)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A comparison of machine learning methods for cutting parameters prediction in high speed turning process

Zoran Jurkovic et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2018)

添加到收藏夹

Article Automation & Control Systems

Application of audible sound signals for tool wear monitoring using machine learning techniques in end milling

Achyuth Kothuru et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Using robust generalized fuzzy modeling and enhanced symbolic regression to model tribological systems

Gabriel Kronberger et al.

APPLIED SOFT COMPUTING (2018)

添加到收藏夹

Article Engineering, Manufacturing

Cloud-Based Parallel Machine Learning for Tool Wear Prediction

Dazhong Wu et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Mechanical

Optimizing the Tribological Behavior of Hybrid Copper Surface Composites Using Statistical and Machine Learning Techniques

Titus Thankachan et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Mechanical

A non-reference evaluation method for edge detection of wear particles in ferrograph images

Jingqiu Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

Gaussian process regression for tool wear prediction

Dongdong Kong et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Using artificial intelligence models for the prediction of surface wear based on surface isotropy levels

A. Bustillo et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2018)

添加到收藏夹

Article Chemistry, Analytical

Tool Wear Prediction in Ti-6Al-4V Machining through Multiple Sensor Monitoring and PCA Features Pattern Recognition

Alessandra Caggiano

SENSORS (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

BONN Technique: Tribological Properties Predictor for Plasma Nitrided 316L Stainless Steel

T. Sathish

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Review Multidisciplinary Sciences

State-of-the-art in artificial neural network applications: A survey

Oludare Isaac Abiodun et al.

HELIYON (2018)

添加到收藏夹

Article Engineering, Mechanical

Lubrication Regime Classification of Hydrodynamic Journal Bearings by Machine Learning Using Torque Data

Jakob Moder et al.

LUBRICANTS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Performance evaluation of friction stir welding using machine learning approaches

Shubham Verma et al.

METHODSX (2018)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Tool-wear prediction and pattern-recognition using artificial neural network and DNA-based computing

Doriana M. D'Addona et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2017)

添加到收藏夹

Article Automation & Control Systems

Prediction of Failure in Lubricated Surfaces Using Acoustic Time-Frequency Features and Random Forest Algorithm

Sergey A. Shevchik et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2017)

添加到收藏夹

Article Engineering, Manufacturing

A Comparative Study on Machine Learning Algorithms for Smart Manufacturing: Tool Wear Prediction Using Random Forests

Dazhong Wu et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Design and development of force and torque measurement setup for real time monitoring of friction stir welding process

Bipul Das et al.

MEASUREMENT (2017)

添加到收藏夹

Article Engineering, Manufacturing

Torque based defect detection and weld quality modelling in friction stir welding process

Bipul Das et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Engineering, Mechanical

Design and application of friction pair surface modification coating for remanufacturing

Haidou Wang et al.

FRICTION (2017)

添加到收藏夹

Article Automation & Control Systems

A comparison of performance of artificial intelligence methods in prediction of dry sliding wear behavior

Farshid Alambeigi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Mechanical

Shape classification of wear particles by image boundary analysis using machine learning algorithms

Wei Yuan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

添加到收藏夹

Review Engineering, Mechanical

Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings

Daniel Gropper et al.

TRIBOLOGY INTERNATIONAL (2016)

添加到收藏夹

Article Engineering, Mechanical

Establishing quantitative structure tribo-ability relationship model using Bayesian regularization neural network

Xinlei Gao et al.

FRICTION (2016)

添加到收藏夹

Article Oncology

Introduction to machine learning: k-nearest neighbors

Zhongheng Zhang

ANNALS OF TRANSLATIONAL MEDICINE (2016)

添加到收藏夹

Article Engineering, Industrial

Enhanced particle filter for tool wear prediction

Jinjiang Wang et al.

JOURNAL OF MANUFACTURING SYSTEMS (2015)

添加到收藏夹

Article Acoustics

A new method for the prediction of chatter stability lobes based on dynamic cutting force simulation model and support vector machine

Chong Peng et al.

JOURNAL OF SOUND AND VIBRATION (2015)

添加到收藏夹

Article Education & Educational Research

Flipping the classroom and instructional technology integration in a college-level information systems spreadsheet course

Randall S. Davies et al.

ETR&D-EDUCATIONAL TECHNOLOGY RESEARCH AND DEVELOPMENT (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Artificial Intelligence in numerical modeling of nano sized ceramic particulates reinforced metal matrix composites

Mohsen Ostad Shabani et al.

APPLIED MATHEMATICAL MODELLING (2012)

添加到收藏夹

Article Engineering, Industrial

Supply chain integration and performance: The effects of long-term relationships, information technology and sharing, and logistics integration

Daniel Prajogo et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2012)

添加到收藏夹

Article Engineering, Chemical

Data-Driven Model for Estimation of Friction Coefficient Via Informatics Methods

Eric W. Bucholz et al.

TRIBOLOGY LETTERS (2012)

添加到收藏夹

Review Health Care Sciences & Services

The Benefits Of Health Information Technology: A Review Of The Recent Literature Shows Predominantly Positive Results

Melinda Beeuwkes Buntin et al.

HEALTH AFFAIRS (2011)

添加到收藏夹

Article Engineering, Mechanical

Tool wear monitoring by machine learning techniques and singular spectrum analysis

Bovic Kilundu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

添加到收藏夹

Article Engineering, Mechanical

A systematic approach for the selection of tribological coatings

D. B. Luo et al.

WEAR (2011)

添加到收藏夹

Article Automation & Control Systems

Optimizations of friction stir welding of aluminum alloy by using genetically optimized neural network

Ibrahim N. Tansel et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)

添加到收藏夹

Article Engineering, Mechanical

Friction materials development by using DOE/RSM and artificial neural network

Guipu Xiao et al.

TRIBOLOGY INTERNATIONAL (2010)

添加到收藏夹

Article Engineering, Mechanical

Artificial intelligence as efficient technique for ball bearing fretting wear damage prediction

T. Kolodziejczyk et al.

WEAR (2010)

添加到收藏夹

Article Chemistry, Physical

Prediction of tribological behavior of aluminum-copper based composite using artificial neural network

Mohammed Hayajneh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Engineering, Industrial

Prediction of cutting force for self-propelled rotary tool using artificial neural networks

Wangshen Hao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)

添加到收藏夹

Article Engineering, Mechanical

A study of information technology used in oil monitoring

XP Yan et al.

TRIBOLOGY INTERNATIONAL (2005)

添加到收藏夹

Review Materials Science, Multidisciplinary

Friction stir welding and processing

RS Mishra et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.