☆ 4.6 Article

Comparison of Various Thin-Film-Based Absorber Materials: A Viable Approach for Next-Generation Solar Cells

COATINGS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Optimization of a Pb-free all-perovskite tandem solar cell with 30.85% efficiency

Arman U. Duha et al.

Summary: Simulation results of a lead-free all-perovskite tandem solar cell show that the optimal tandem cell thickness can achieve a high efficiency of 30.85%, significantly higher than that of each subcell. The top and bottom subcells have thicknesses of 983nm and 1600nm respectively, with a matching J(SC) of 14.70 mA/cm(2).

OPTICAL MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cubic Silicon Carbide (3C-SiC) as a buffer layer for high efficiency and highly stable CdTe solar cell

Jannatun Noor Sameera et al.

Summary: Cubic Silicon Carbide (3C-SiC) is introduced as a potential non-toxic buffer layer for heterojunction CdTe solar cells, with device modeling and optimization of the novel CdTe solar cell conducted. The study focuses on the thickness, doping concentration, and defect density of the 3C-SiC buffer layer, as well as the impact of environmental conditions on efficient photovoltaic operation.

OPTICAL MATERIALS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Study of CZTSSe-Based Solar Cells with Different ETMs by SCAPS

Lhoussayne Et-taya et al.

Summary: In this study, the performance of CZTSSe-based solar cells with different electron transporting materials was numerically investigated. The results show the optimum power conversion efficiency for CdS, TiO2, and ZnSe as the ETMs.

SUSTAINABILITY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical Insights into the Influence of Electrical Properties of n-CdS Buffer Layer on the Performance of SLG/Mo/p-Absorber/n-CdS/n-ZnO/Ag Configured Thin Film Photovoltaic Devices

Asmaa Soheil Najm et al.

Summary: The study investigates the impact of electrical properties of CdS buffer layer on thin film photovoltaic devices, revealing that carrier mobility and concentration of the buffer layer can affect device performance to some extent, particularly for absorber layers with a conduction band offset greater than 0.3 eV. However, for an ideal absorber layer, these properties do not significantly alter the maximum achievable efficiency.

COATINGS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Enhancing the Performance of an Sb2Se3-Based Solar Cell by Dual Buffer Layer

Kamlesh Kumar Mamta et al.

Summary: The study focused on the impact of using ZnS as a buffer layer instead of CdS in Sb2Se3-based solar cells, showing that changing buffer materials and thicknesses significantly affects cell performance.

SUSTAINABILITY (2021)

添加到收藏夹

Article Physics, Condensed Matter

Numerical Simulation and Performance Evaluation of Highly Efficient Sb2Se3 Solar Cell with Tin Sulfide as Hole Transport Layer

Adil Sunny et al.

Summary: By introducing inorganic tin sulfide (SnS) as a hole transport material, the performance of Sb2Se3 thin-film solar cells is optimized to enhance photovoltaic efficiency and reduce carrier recombination loss. The simulated results suggest that HTL with electron affinity greater than 3.5 eV and back contact metal with a work function greater than or equal to 4.9 eV will improve solar cell efficiency.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2021)

添加到收藏夹

Article Energy & Fuels

Stable and efficient Sb2Se3 solar cells with solution-processed NiOx hole-transport layer

Liping Guo et al.

Summary: In this study, an n-i-p structure was fabricated for Sb2Se3 solar cells by integrating a solution-processed NiOx hole-transport layer to enhance carrier collection, resulting in an improved power conversion efficiency from 6.12% to 7.15% with a 50 nm NiOx HTL. The mechanism behind the enhanced device performance was characterized through material microstructure, device physics, and interface electronic behaviors, showing that the low-cost NiOx HTL can also improve device stability under accelerated stress tests.

SOLAR ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

CZTS nanoparticles as an effective hole-transport layer for Sb2Se3 thin-film solar cells

Fangling Mu et al.

Summary: By utilizing CZTS nanoparticles as a hole-transport layer, the back interface carrier recombination in Sb2Se3 solar cells can be effectively suppressed, leading to a significant improvement in carrier collection efficiency and ultimately achieving a champion efficiency of 6.06% in the n-i-p Sb2Se3 solar cells.

SOLAR ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Numerical modelling and analysis of earth abundant Sb2S3 and Sb2Se3 based solar cells using SCAPS-1D

Arindam Basak et al.

Summary: Antimony chalcogenides, Sb2S3 and Sb2Se3, show great potential for next generation solar cells due to their non-toxicity, earth abundance, low cost and easy availability. Through detailed numerical analysis and configuration optimization, the optimal parameters for achieving high efficiency solar cells using Sb2S3 and Sb2Se3 have been determined, including absorber layer thickness, buffer layer thickness, series-shunt resistance, and the choice of electrode material with suitable work function. Efficiencies of 9.51% and 12.62% have been achieved for Sb2S3 and Sb2Se3 solar cells respectively after optimizing different parameters.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigating Effect of CdS Buffer Layer on the Performance of Cu2ZnSnS4Based Solar Cells Using SCAPS-1D

Rihana Khan et al.

Summary: The performance enhancement of Copper Zinc Tin Sulphide (Cu2ZnSnS4) based thin film solar cell was proposed using the SCAPS-1D simulation program. Through optimization, an efficiency enhancement of 19.64% was achieved with Jsc, Voc, and FF values of 24.22 mA cm(-2), 0.9489 V, and 86.13% respectively.

TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

CZTS solar cells and the possibility of increasing VOC using evaporated Al2O3 at the CZTS/CdS interface

E. Ojeda-Duran et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Proposal of CIGS dual-junction solar cell and investigation of different metal grids effect

Maryam Hedayati et al.

OPTICAL AND QUANTUM ELECTRONICS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Efficiency enhancement of CZTSSe solar cells via screening the absorber layer by examining of different possible defects

Mehran Minbashi et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design and simulation of C2N based solar cell by SCAPS-1D software

Xiangyu Zhou et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Development of high efficiency CZTS solar cell through buffer layer parameters optimization using SCAPS-1D

Shadi Yasin et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

9.2%-efficient core-shell structured antimony selenide nanorod array solar cells

Zhiqiang Li et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Physical

Interface Structure and Band Alignment of CZTS/CdS Heterojunction: An Experimental and First-Principles DFT Investigation

Sachin Rondiya et al.

MATERIALS (2019)

添加到收藏夹

Proceedings Paper Energy & Fuels

ZnTe Back Buffer Layer to Enhance the Efficiency of CdS/CdTe Solar Cells

Sandip Singh Bista et al.

2019 IEEE 46TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Analysis of Sb2Se3/CdS based photovoltaic cell: A numerical simulation approach

Ling-yan Lin et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Boosting the efficiency of single junction kesterite solar cell using Ag mixed Cu2ZnSnS4 active layer

Uday Saha et al.

RSC ADVANCES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structural and electronic properties of low-index stoichiometric Cu2ZnSnS4 surfaces

Zhan-Ju Jia et al.

MATERIALS RESEARCH EXPRESS (2018)

添加到收藏夹

Review Engineering, Multidisciplinary

Advances in Cost-Efficient Thin-Film Photovoltaics Based on Cu(In, Ga)Se2

Michael Powalla et al.

ENGINEERING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

An Antimony Selenide Molecular Ink for Flexible Broadband Photodetectors

Md Rezaul Hasan et al.

ADVANCED ELECTRONIC MATERIALS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improvement of CIGS thin-film solar cell performance by optimization of Zn(O,S) buffer layer parameters

Samaneh Sharbati et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2015)

添加到收藏夹

Review Green & Sustainable Science & Technology

Physical principles of losses in thin film solar cells and efficiency enhancement methods

Meena Dhankhar et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

CZTS based thin film solar cells: a status review

M. P. Suryawanshi et al.

MATERIALS TECHNOLOGY (2013)

添加到收藏夹

Review Chemistry, Physical

Achievements and Challenges of CdS/CdTe Solar Cells

Zhou Fang et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2011)

添加到收藏夹

Article Physics, Condensed Matter

Electronic structure of antimony selenide (Sb2Se3) from GW calculations

Rajesekarakumar Vadapoo et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2011)

添加到收藏夹

Article Energy & Fuels

New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%

Philip Jackson et al.

PROGRESS IN PHOTOVOLTAICS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical modeling of intra-band tunneling for heterojunction solar cells in SCAPS

J. Verschraegen et al.

THIN SOLID FILMS (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation of the band gap energy on CdS thin films growth by two different techniques

AI Oliva et al.

THIN SOLID FILMS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.