相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Cold-sprayed coatings: Microstructure, mechanical properties, and wear behaviour
Pedro Poza et al.
PROGRESS IN MATERIALS SCIENCE (2022)
Low pressure cold spraying of TiO2 on acrylonitrile butadiene styrene (ABS)
M. Winnicki et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Formation conditions of vortex-like intermixing interfaces in cold spray
Shuo Yin et al.
MATERIALS & DESIGN (2021)
Improved corrosion resistance of AZ91D magnesium alloy coated by novel cold-sprayed Zn-HA/Zn double-layer coatings
Hai-Long Yao et al.
CERAMICS INTERNATIONAL (2020)
Preparation and characterization of NiAl-TiC-TiB2 intermetallic matrix composite coatings by atmospheric plasma spraying of SHS powders
Xizhi Fan et al.
CERAMICS INTERNATIONAL (2020)
In-vitro comparison of hydroxyapatite coatings obtained by cold spray and conventional thermal spray technologies
A. M. Vilardell et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Solid-state cold spraying of Ti and its alloys: A literature review
Wenya Li et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Microstructures and high-temperature wear behavior of NiAl/WC-Fex coatings on carbon steel by plasma cladding
Jianjun Yuan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
High temperature corrosion and wear behavior of HVOF-sprayed coating of It) Al2O3-NiAl on AISI 304 stainless steel
N. Abu-warda et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructure and wear of thermal sprayed composite NiAl-based coatings
O. Poliarus et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Building up WC-Co coatings by cold spray: A finite element simulation
Giovanni Bolelli et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructure and Microhardness of Ni/Al-TiB2 Composite Coatings Prepared by Cold Spraying Combined with Postannealing Treatment
Xiao Chen et al.
COATINGS (2019)
Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 degrees C
Mingwen Bai et al.
CORROSION SCIENCE (2018)
Production of Annealed Cold-Sprayed 316L Stainless Steel Coatings for Biomedical Applications and Their in-vitro Corrosion Response
Burak Dikici et al.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2018)
Metallization of polyether ether ketone (PEEK) by copper coating via cold spray
Chaoyue Chen et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Microstructure and adhesion strength of NiAl coating prepared on Q235 substrate by combustion synthesis assisted with Cu-Zn interlayer
Lei Li et al.
SURFACE & COATINGS TECHNOLOGY (2018)
High temperature chlorine-induced corrosion of Ni50Cr coating: HVOLF, HVOGF, cold spray and laser cladding
B. Song et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Mechanical and tribological properties of plasma sprayed NiAl composite coatings with addition of nanostructured TiO2/Bi2O3
Xinpeng Wang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Influence of coating thickness on residual stress and adhesion-strength of cold-sprayed Inconel 718 coatings
R. Singh et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Microstructures and Properties of Cold Spray Nanostructured HA Coatings
Xiao Chen et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
The effect of Al-Mg substrate preparation on the adhesion strength of plasma sprayed Ni-Al coatings
Raimonda Lukauskaite et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Characterization and Wear Behavior of Heat-treated Ni3Al Coatings Deposited by Air Plasma Spraying
K. Mehmood et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Tribological properties of laser cladding NiAl intermetallic compound coatings at elevated temperatures
Youjun Yu et al.
TRIBOLOGY INTERNATIONAL (2016)
In-situ reactive fabrication and effect of phosphorus on microstructure evolution of Ni/Ni-Al intermetallic composite coating by laser cladding
Kun Liu et al.
MATERIALS & DESIGN (2016)
Deposition Behavior of Nanostructured WC-23Co Particles in Cold Spraying Process
X. Chen et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Mechanical property and wear performance dependence on processing condition for cold-sprayed WC-(nanoWC-Co)
Guan-Jun Yang et al.
APPLIED SURFACE SCIENCE (2015)
Effect of cold sprayed Al coating on mechanical property and corrosion behavior of friction stir welded AA2024-T351 joint
W. Y. Li et al.
MATERIALS & DESIGN (2015)
On the search for producing intermetallics by diffusion reaction of cold spray bulk deposits
Vit Jan et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Effects of Substrate Hardness and Spray Angle on the Deposition Behavior of Cold-Sprayed Ti Particles
Shuo Yin et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)
Ni-Al Nanoscale Energetic Materials: Phenomena Involved During the Manufacturing of Bulk Samples by Cold Spray
A. Bacciochini et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)
Significant influence of carrier gas temperature during the cold spray process
S. Yin et al.
SURFACE ENGINEERING (2014)
Microstructural and wear characteristics of HVOF-sprayed nanocrystalline NiAl coating
M. H. Enayati et al.
WEAR (2014)
Effect of Phase Transformation Mechanism on the Microstructure of Cold-sprayed Ni/Al-Al2O3 Composite Coatings during Post-spray Annealing Treatment
Guan-Jun Yang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
Fracture toughness and wear behavior of NiAl-based nanocomposite HVOF coatings
B. Movahedi
SURFACE & COATINGS TECHNOLOGY (2013)
Formation of Pore Structure and Its Influence on the Mass Transport Property of Vacuum Cold Sprayed TiO2 Coatings Using Strengthened Nanostructured Powder
Guan-Jun Yang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)
Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings
X. K. Suo et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)
Functionally graded WC-Co/NiAl HVOF coatings for damage tolerance, wear and corrosion protection
Giovanni Bolelli et al.
SURFACE & COATINGS TECHNOLOGY (2012)
NiAl Matrix High-Temperature Self-Lubricating Composite
Shengyu Zhu et al.
TRIBOLOGY LETTERS (2011)
Influence of substrate hardness transition on built-up of nanostructured WC-12Co by cold spraying
Pei-Hu Gao et al.
APPLIED SURFACE SCIENCE (2010)
Formation of NiAl Intermetallic Compound by Cold Spraying of Ball-Milled Ni/Al Alloy Powder Through Postannealing Treatment
Qiang Zhang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2008)
Characterisation and erosion behaviour of a plasma sprayed Ni3Al coating on a Fe-based superalloy
SB Mishra et al.
MATERIALS LETTERS (2005)
Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray process
M Grujicic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Deposition characteristics of titanium coating in cold spraying
CJ Li et al.
SURFACE & COATINGS TECHNOLOGY (2003)
The effect of spray parameters on the properties of high velocity oxy-fuel NiAl intermetallic coatings
JA Hearley et al.
SURFACE & COATINGS TECHNOLOGY (2000)