4.7 Article

Development of nanocomposite based on hydroxyapatite/hematite/graphene oxide for medical applications

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Ceramics

Improvement of physicochemical properties of ternary nanocomposites based on hydroxyapatite/CuO/graphene oxide for biomedical usages

M. Afifi et al.

Summary: This study investigated nanocomposites based on hydroxyapatite (HAP), which showed improved human osteoblast viability and excellent antibacterial activity when combined with CuO and GO. The results suggest that the biomaterials have great biocompatibility for biomedical applications.

CERAMICS INTERNATIONAL (2022)

Review Automation & Control Systems

Extreme pressure and antiwear additives for lubricant: academic insights and perspectives

Haogang Li et al.

Summary: This article reviews the mechanisms and properties of extreme pressure (EP) and antiwear (AW) additives in boundary lubrication and discusses the advantages and disadvantages of traditional and nanoparticle additives. It also studies the influence of non-polar chain length on traditional additives and the effects of nanoparticle structure parameters, concentration, and media polarity on properties.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Article Chemistry, Analytical

Degradation of methylene blue using co-dopants Mg and Se in an hydroxyapatite composite

Mehrez E. El-Naggar et al.

Summary: This study investigated the effect of different magnesium ion contents incorporated into hydroxyapatite (HAP) and modified with selenite ions on the degradation performance of methylene blue. The results showed that even at a low ratio, magnesium ions induced changes in the microstructure, morphology, surface area, external surface charge, particle size, and degradation performance of HAP.

LUMINESCENCE (2022)

Article Instruments & Instrumentation

Rotational nonlinear double-beam energy harvesting

Ze-Qi Lu et al.

Summary: This paper investigates the performance of a coupled rotational double-beam energy harvester (DBEH) with magnetic nonlinearity. The study analyzes the effect of varying parameters on energy harvesting performance using a theoretical model and numerical analysis. The theoretical model is validated through experiments, and the results show effective energy harvesting over a wide range of rotational frequencies.

SMART MATERIALS AND STRUCTURES (2022)

Article Chemistry, Physical

Piezo-phototronic effect promoted carrier separation in coaxial p-n junctions for self-powered photodetector

Xinxin Du et al.

Summary: This study demonstrates fiber-shaped photodetectors constructed by vertical organic-inorganic heterostructures, achieving self-powered behavior and promoted photoresponse through piezo-phototronic effect. By controlling bend-induced piezo-potentials, tunable photoresponse and ultrafast response and recovery were realized, enhancing light detection ability.

NANO ENERGY (2022)

Article Automation & Control Systems

Research on water jet-guided laser micro-hole machining of 6061 aluminum alloy

Yinuo Zhang et al.

Summary: With the rapid development of the information age, electronic components are developing towards miniaturization, making chip manufacturing more difficult. Water jet-guided laser processing technology was used to study the transient thermal distribution and forming qualities of 6061 aluminum alloy, showing the effects of laser parameters on micro-hole quality and the advantages and disadvantages of different drilling technologies.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Article Multidisciplinary Sciences

In situ synthesis of hydroxyapatite nanorods on graphene oxide nanosheets and their reinforcement in biopolymer scaffold

Cijun Shuai et al.

Summary: This study successfully combined the mechanical properties of GO and the bioactivity of HAP in biopolymer bone scaffold through in situ synthesis, addressing the dispersion issues of GO and HAP.

JOURNAL OF ADVANCED RESEARCH (2022)

Article Chemistry, Physical

Pd/PANI/Ti composite electrocatalyst with efficient electrocatalytic performance: Synthesis, characterization, stability, kinetic studies, and degradation mechanism

Jian Zhang et al.

Summary: The Pd/PANI/Ti composite electrodes were prepared and showed high efficiency in degrading chlorophenol pollutant 2,4-DCP, indicating promising practical applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Engineering, Mechanical

Lubrication-enhanced mechanisms of titanium alloy grinding using lecithin biolubricant

Dongzhou Jia et al.

Summary: The effects of lecithin on the electrophysiological properties of biolubricant were investigated, and the influence of lecithin mixing ratio on grinding performance was discussed. The experimental results demonstrate that lecithin can improve the conductivity, viscosity, and surface tension of biolubricant, leading to enhanced grinding performance.

TRIBOLOGY INTERNATIONAL (2022)

Article Multidisciplinary Sciences

Electrospun Polycaprolactone Nanofibrous Webs Containing Cu-Magnetite/Graphene Oxide for Cell Viability, Antibacterial Performance, and Dye Decolorization from Aqueous Solutions

Hyam A. Radwan et al.

Summary: The study involved doping magnetite nanoparticles with copper through a mat of graphene oxide nanosheets to create nanofibrous membranes, which demonstrated good mechanical properties, high dye removal efficiency, and certain antibacterial effectiveness.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)

Article Chemistry, Physical

Cost-effective mechanochemical synthesis of highly dispersed supported transition metal catalysts for hydrogen storage

Yike Huang et al.

Summary: The research demonstrates a quasi-solid-state template strategy for the synthesis of highly dispersed metal catalysts on nitrogen-doped carbon, successfully applied in MgH2. This method achieves dispersion of metal precursor, evaporation of solvent, downsizing of templates, and successful synthesis of various metal catalysts in a single-step ball-milling process.

NANO ENERGY (2021)

Article Metallurgy & Metallurgical Engineering

Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg-6.0Zn-0.5Mn alloy

Bin-Jiang Lv et al.

Summary: A new wrought magnesium alloy based on Mg-6.0Zn-0.5Mn has been developed, exhibiting a superior combination of high tensile yield strength and good ductility. Addition of minor neodymium and erbium accelerates twinning, dynamic recrystallization, and dynamic precipitation processes, leading to improved mechanical properties. The alloy demonstrates enhanced yield strength, tensile strength, and elongation due to fine complete DRX grains, second phase particles, and a high density of precipitates resulting from the micro-alloying.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Chemistry, Physical

Tuning the compositional configuration of hydroxyapatite modified with vanadium ions including thermal stability and antibacterial properties

Badreah A. Al Jahdaly et al.

Summary: In this study, vanadate ions were incorporated into hydroxyapatite lattice with different concentrations using the co-precipitation technique. The presence of vanadate dopants significantly affected lattice parameters, thermal stability, and antibacterial properties of the resulting biomaterial.

JOURNAL OF MOLECULAR STRUCTURE (2021)

Article Materials Science, Multidisciplinary

Thallium/vanadate co-substitutions through hydroxyapatite/polycaprolactone nanofibrous scaffolds for biomedical domains

Mehrez E. El-Naggar et al.

Summary: The electrospun nanofibrous scaffolds containing codoped HAP in PCL demonstrated good microstructure, mechanical properties, and antibacterial efficacy. By altering the Tl ion ratio, the surface morphology and antibacterial effects of the nanofiber scaffolds can be effectively controlled.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Engineering, Biomedical

Accelerated degradation of HAP/PLLA bone scaffold by PGA blending facilitates bioactivity and osteoconductivity

Cijun Shuai et al.

Summary: The addition of PGA into HAP/PLLA scaffold accelerated the degradation process, leading to increased degradation rate and pore formation, which promoted the deposition and growth of bone-like apatite as well as provided a favorable environment for osteoblast adhesion and proliferation. This led to excellent bone defect repair capacity demonstrated by the formation of abundant new bone tissue and blood vessel tissue, ultimately bridging both ends of the defect region after 8 weeks of implantation.

BIOACTIVE MATERIALS (2021)

Article Materials Science, Multidisciplinary

Facile modification of polycaprolactone nanofibers with hydroxyapatite doped with thallium ions for wound and mucosal healing applications

Mehrez E. El-Naggar et al.

Summary: The Tl-HAP@PCL nanofibers, fabricated by encapsulating hydroxyapatite modified with different contributions of thallium ions within polycaprolactone scaffolds, showed variations in roughness, contact angle, and mechanical properties, demonstrating promising wound dressing capability and cell viability.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Chemistry, Multidisciplinary

Human Dental Pulp Stem Cell Osteogenic Differentiation Seeded on Equine Bone Block with Graphene and Melatonin

Rosa Mancinelli et al.

Summary: Equine bone blocks with G-N2 and G-N10 coatings, along with melatonin, were found to enhance cell adhesion and increase osteogenic potential of hDPSCs, suggesting a promotion of the osteogenic process.

APPLIED SCIENCES-BASEL (2021)

Article Engineering, Biomedical

Microstructure evolution and texture tailoring of reduced graphene oxide reinforced Zn scaffold

Youwen Yang et al.

Summary: This study demonstrated the great potential of using reduced graphene oxide (RGO) as reinforcement in zinc scaffold to enhance mechanical performance and cell behavior, making it a promising material for bone repair applications.

BIOACTIVE MATERIALS (2021)

Article Construction & Building Technology

Physico-mechanical and microstructure properties of cemented coal Gangue-Fly ash backfill: Effects of curing temperature

Weizhen Liu et al.

Summary: High environment temperatures in deep coal mines can significantly affect the strength and microstructure of Cemented Coal Gangue-Fly Ash Backfill (CGFB). Higher curing temperatures accelerate the hydration reaction rate and generate more hydration products, leading to changes in the failure mode of CGFB specimens. Under the influence of temperature, the porosity of CGFB specimens better reflects the mechanical behavior of the backfill.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Biochemistry & Molecular Biology

Morphological features and mechanical properties of nanofibers scaffolds of polylactic acid modified with hydroxyapatite/CdSe for wound healing applications

Hossam Donya et al.

Summary: Different nanocomposites were encapsulated into nanofibrous scaffolds, with compositions indexed as HAP@PLA, CdSe@PLA, HAP/CdSe@PLA, HAP/GO@PLA, and HAP/CdSe/GO@PLA. Results showed that the addition of CdSe and GO dopants significantly increased nanofiber diameter and enhanced antibacterial activity.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Article Biochemistry & Molecular Biology

Preparation of carbon dots-hematite quantum dots-loaded hydroxypropyl cellulose-chitosan nanocomposites for drug delivery, sunlight catalytic and antimicrobial application

Yanuo Chen et al.

Summary: This project focused on the synthesis of carbon dots/alpha-Fe2O3 quantum dots and the preparation of HPCCS and UN. The nanocomposites exhibited unique characteristics in terms of antimicrobial, pH-responsive and optical properties, and showed high photocatalytic activity for pollutant degradation.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY (2021)

Review Engineering, Mechanical

Cryogenic minimum quantity lubrication machining: from mechanism to application

Mingzheng Liu et al.

Summary: The article discusses the role of cutting fluid in metal cutting and the environmental issues associated with traditional flood machining. It then explores the limitations of alternative technologies such as MQL and cryogenic cooling, and the potential of combining the two in CMQL technology. The benefits, mechanisms, and application prospects of CMQL are systematically analyzed, showing its superiority over cryogenic or MQL alone.

FRONTIERS OF MECHANICAL ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Nanofibers of polycaprolactone containing hydroxyapatite doped with aluminum/vanadate ions for wound healing applications

Sherif Ashraf et al.

Summary: In this study, an electrospinning technique was used to fabricate a nanofibrous scaffold based on PCL containing co-doped HAP with varying Al/V ion levels. The modified HAP showed changes in cell viability, contact angle, microstructure, and mechanical properties as the Al content increased. The results suggest that this material has potential for biomedical wound healing applications.

NEW JOURNAL OF CHEMISTRY (2021)

Review Multidisciplinary Sciences

A review of green methods for phyto-fabrication of hematite (α-Fe2O3) nanoparticles and their characterization, properties, and applications

Mostafa F. Al-Hakkani et al.

Summary: This study presents a quick and simple literature survey on the bio-fabrication of Alpha Hematite nanoparticles using plant extracts green method, highlighting the utility of environmentally friendly biosynthesis methods, physicochemical properties, instrumental analysis tools, and potential applications.

HELIYON (2021)

Review Chemistry, Multidisciplinary

Biomaterials for bone tissue engineering scaffolds: a review

Huawei Qu et al.

RSC ADVANCES (2019)

Article Biotechnology & Applied Microbiology

Hepatoprotective and free radical scavenging actions of quercetin nanoparticles on aflatoxin B1-induced liver damage: in vitro/in vivo studies

Aziz Eftekhari et al.

ARTIFICIAL CELLS NANOMEDICINE AND BIOTECHNOLOGY (2018)

Article Chemistry, Analytical

Bioinspired carbon quantum dots for sensitive fluorescent detection of vitamin B12 in cell system

Mingqian Wang et al.

ANALYTICA CHIMICA ACTA (2018)

Review Medicine, Research & Experimental

A short view on nanohydroxyapatite as coating of dental implants

Javad Yazdani et al.

BIOMEDICINE & PHARMACOTHERAPY (2018)

Article Physics, Condensed Matter

Characterization of Mg-containing hydroxyapatites synthesized by combustion method

Omer Kaygili et al.

PHYSICA B-CONDENSED MATTER (2018)

Article Biochemistry & Molecular Biology

Development of Zinc-Doped Hydroxyapatite by Sol-Gel Method for Medical Applications

Catalin Constantin Negrila et al.

MOLECULES (2018)

Article Radiology, Nuclear Medicine & Medical Imaging

Structure and cell viability of Pd substituted hydroxyapatite nano particles

S. F. Mansour et al.

BIOMEDICAL PHYSICS & ENGINEERING EXPRESS (2018)

Article Biotechnology & Applied Microbiology

Ciprofloxacin HCl-loaded calcium carbonate nanoparticles: preparation, solid state characterization, and evaluation of antimicrobial effect against Staphylococcus aureus

Solmaz Maleki Dizaj et al.

ARTIFICIAL CELLS NANOMEDICINE AND BIOTECHNOLOGY (2017)

Review Multidisciplinary Sciences

Enhancing regenerative approaches with nanoparticles

Sabine van Rijt et al.

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2017)

Article Multidisciplinary Sciences

Physico-mechanical and morphological features of zirconia substituted hydroxyapatite nano crystals

S. F. Mansour et al.

SCIENTIFIC REPORTS (2017)

Review Nanoscience & Nanotechnology

Review of Research on Template Methods in Preparation of Nanomaterials

Yadian Xie et al.

JOURNAL OF NANOMATERIALS (2016)

Article Chemistry, Physical

A Novel Aluminum-Graphite Dual-Ion Battery

Xiaolong Zhang et al.

ADVANCED ENERGY MATERIALS (2016)

Review Biotechnology & Applied Microbiology

Impact of Dental Implant Surface Modifications on Osseointegration

Ralf Smeets et al.

BIOMED RESEARCH INTERNATIONAL (2016)

Article Materials Science, Multidisciplinary

Synthesis and characterization of hematite nanopowders

J. Sharmila Justus et al.

MATERIALS RESEARCH EXPRESS (2016)

Article Nanoscience & Nanotechnology

Preparation, Characterization, and Antibacterial Activity of Silver Nanoparticle-Decorated Graphene Oxide Nanocomposite

Wei Shao et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Review Pharmacology & Pharmacy

Calcium carbonate nanoparticles as cancer drug delivery system

Solmaz Maleki Dizaj et al.

EXPERT OPINION ON DRUG DELIVERY (2015)

Article Chemistry, Physical

Bioactive hydroxyapatite/graphene composite coating and its corrosion stability in simulated body fluid

Ana Jankovic et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Materials Science, Biomaterials

Distribution of Eu2+ and Eu3+ Ions in Hydroxyapatite: A Cathodoluminescence and Raman Study

Luz A. Zavala-Sanchez et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)

Article Materials Science, Biomaterials

Distribution of Eu2+ and Eu3+ Ions in Hydroxyapatite: A Cathodoluminescence and Raman Study

Luz A. Zavala-Sanchez et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)

Article Multidisciplinary Sciences

Antimicrobial activity of iron oxide nanoparticle upon modulation of nanoparticle-bacteria interface

Manoranjan Arakha et al.

SCIENTIFIC REPORTS (2015)

Article Materials Science, Multidisciplinary

Hydroxyapatite nanopowders prepared in the presence of zirconium ions

M. J. Lukic et al.

MATERIALS LETTERS (2014)

Article Polymer Science

Physical and mechanical properties of graphene oxide/polyethersulfone nanocomposites

T. Forati et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2014)

Article Materials Science, Ceramics

Nano-crystalline aluminum-containing hydroxyapatite based bioceramics: synthesis and characterization

O. Kaygili et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2013)

Article Chemistry, Multidisciplinary

Synthesis, Characterization, and Antimicrobial Activity of Nano-Hydroxyapatite-Zinc for Bone Tissue Engineering Applications

M. Swetha et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2012)

Review Chemistry, Multidisciplinary

Graphene and Graphene Oxide: Synthesis, Properties, and Applications

Yanwu Zhu et al.

ADVANCED MATERIALS (2010)

Article Geosciences, Multidisciplinary

In situ FTIR study on the dehydration of natural goethite

P. S. R. Prasad et al.

JOURNAL OF ASIAN EARTH SCIENCES (2006)

Article Chemistry, Physical

FT-IR, XPS and PEC characterization of spray deposited hematite thin films

JD Desai et al.

APPLIED SURFACE SCIENCE (2005)

Article Orthopedics

The incidence of fractures and dislocations referred for orthopaedic services in a capitated population

MR Brinker et al.

JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2004)

Review Otorhinolaryngology

Scaffolds and biomaterials for tissue engineering: a review of clinical applications

A Vats et al.

CLINICAL OTOLARYNGOLOGY (2003)