☆ 4.7 Article

Effect of pulsed laser and laser-arc hybrid on aluminum/steel riveting-welding hybrid bonding technology

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Investigation on microstructure and properties of dissimilar joint between TRIP800 and QP980 fabricated by laser welding

Yanbing Guo et al.

Summary: Dissimilar weld joints of QP980 and TRIP800 were fabricated using a fiber laser for study of their microstructure and mechanical properties. Results showed that the tensile properties were not affected by the narrow softening zone, but a reduction in hardness contributed to fracture in TRIP800. The location of maximum strain shifted from the QP980 side to the TRIP800 side during the tensile test. Limited dome height test (LDH) was used to characterize the dissimilar weld joints, and the LDH values varied with the punch pole location due to softening zone and non-uniform microstructure in the heat-affected zone of the joints.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)

添加到收藏夹

Article Optics

Effect of pulse frequency on the nanosecond pulsed laser welded Al/steel lapped joint

Fengyuan Shu et al.

Summary: The study found that higher pulse frequencies led to better welding characteristics with fewer defects. Increasing the frequency resulted in more compact welding structures.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Process and performance characteristics of an improved friction-stir riveting process

Bin Wang et al.

Summary: Friction-stir riveting is a new mechanical fastening technique that combines spinning and extruding actions to produce joints with high strength. By using improved rivet design and tooling, along with optimized parameters, joints with peak load exceeding 8 kN were achieved in connecting 2-mm AA5052 sheets, showing higher strength than other mechanical joining techniques.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of axial magnetic field on TIG welding-brazing of AA6061 aluminum alloy to HSLA350 steel

Rui Li et al.

Summary: External magnetic field (EMF) has positive effects on joint quality by refining the Al matrix and second phases, increasing joint strength, and reducing the formation of intermetallic compounds (IMCs) layer at the Al/steel welding seam interface.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved mechanical properties of laser-arc hybrid welded Al/steel dissimilar butt-joint through beam oscillation

Yunfei Meng et al.

Summary: In this study, laser-arc hybrid welding combined with beam oscillation was used to suppress the formation of brittle intermetallic compounds at the interface of Al/steel butt-joints, leading to improved uniformity of the weld. The optimized frequency of 150 Hz successfully suppressed weld defects and transformed the interface from an uneven two-layer IMCs to a uniform single-layer IMCs, resulting in a 65% increase in tensile property and a 96% enhancement in bending property.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of Al/steel dissimilar welds fabricated by friction surfacing assisted friction stir lap welding

Li Zhou et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Industrial

Dissimilar metal joining of aluminum to steel by hybrid process of adhesive bonding and projection welding using a novel insert element

Anastasiia Zvorykina et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of fiber laser welded QP980/press-hardened 22MnB5 steel joint

Hongyun Zhao et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Engineering, Industrial

Joint formation mechanism and performance of resistance rivet welding (RRW) for aluminum alloy and press hardened steel

Sizhe Niu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Thermally Assisted Self-Piercing Riveting of AA6061-T6 to Ultrahigh Strength Steel

Lin Deng et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)

添加到收藏夹

Article Transportation Science & Technology

Parameter Sensitivity and Process Time Reduction for Friction Element Welding of 6061-T6 Aluminum to 1500 MPa Press-Hardened Steel

Brandt J. Ruszkiewicz et al.

SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Industrial

Microstructure and mechanical properties of fiber laser welded QP980 steel

Wei Guo et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Manufacturing

Influence of laser power on interfacial microstructure and mechanical properties of laser welded-brazed Al/steel dissimilar butted joint

Liqun Li et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Automation & Control Systems

Recent developments in joining of aluminum alloys

Gurel Cam et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Manufacturing

Resistance Element Welding of 6061 Aluminum Alloy to Uncoated 22MnMoB Boron Steel

Zhanxiang Ling et al.

MATERIALS AND MANUFACTURING PROCESSES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of laser welding on butt joints of Al/steel dissimilar materials

Junhao Sun et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimised design of electrode morphology for novel dissimilar resistance spot welding of aluminium alloy and galvanised high strength steel

Weihua Zhang et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures

G. Meschut et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications

J. Hirsch et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Research on microstructure and mechanical properties of laser keyhole welding-brazing of automotive galvanized steel to aluminum alloy

M. J. Zhang et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Time-Resolved X-Ray Microtomography Observation of Intermetallic Formation Between Solid Fe and Liquid Al

Guillaume Pasche et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications

Hui-Chi Chen et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dissimilar welding of carbon steel to 5754 aluminum alloy by Nd:YAG pulsed laser

M. J. Torkamany et al.

MATERIALS & DESIGN (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Intermetallic compounds in Al 6016/IF-steel friction stir spot welds

S. Bozzi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

An assessment of the entire Al-Fe system including D0(3) ordering

Bo Sundman et al.

ACTA MATERIALIA (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.