相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A novel Bimodal Milling (BiM) approach to achieve harmonic structured SUS316L with controlled microstructure and outstanding mechanical performance
Bhupendra Sharma et al.
POWDER TECHNOLOGY (2022)
Heterogeneous evolution of lattice defects leading to high strength and high ductility in harmonic structure materials through atomic and dislocation simulations
Tomotsugu Shimokawa et al.
ACTA MATERIALIA (2022)
Heterostructured materials: superior properties from hetero-zone interaction
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2021)
Simultaneously enhanced strength and strain hardening capacity in FeMnCoCr high-entropy alloy via harmonic structure design
Guodong Li et al.
SCRIPTA MATERIALIA (2021)
Effects of rolling reduction and direction on fatigue crack propagation in commercially pure titanium with harmonic structure
Y. Nakai et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Improvement of structural efficiency in metals by the control of topological arrangements in ultrafine and coarse grains
Abdallah Shokry et al.
SCIENTIFIC REPORTS (2021)
The effects of thermo-mechanical processing on fatigue crack propagation in commercially pure titanium with a harmonic structure
Kohei Osaki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Critical Assesment 37: Harmonic-structure materials - idea, status and perspectives
Dmytro Orlov et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
A TEM in situ study of the softening of Tungsten by Rhenium
Daniel Caillard
ACTA MATERIALIA (2020)
Investigation on the Durability of Ti-6Al-4V Alloy Designed in a Harmonic Structure via Powder Metallurgy: Fatigue Behavior and Specimen Size Parameter Issue
Benjamin Guennec et al.
METALS (2020)
A three-dimensional microstructure-based crystal plasticity model for coarse-grained and harmonic-structured Ti-6Al-4V under monotonic and cyclic shear loading
Xiang Wang et al.
ACTA MECHANICA (2020)
Combined effects of low temperature nitriding and cold rolling on fatigue properties of commercially pure titanium
Shoichi Kikuchi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Numerical modeling on strengthening mechanisms of the harmonic structured design on CP-Ti and Ti-6Al-4V
Xiang Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Strain partitioning and back-stress evaluation in harmonic-structure materials
Dmytro Orlov et al.
MATERIALS LETTERS (2020)
Extra-strengthening in a harmonic structure designed pure titanium due to preferential recrystallization phenomenon through thermomechanical treatment
Bhupendra Sharma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Harmonic Structure Design: A Strategy for Outstanding Mechanical Properties in Structural Materials
Bhupendra Sharma et al.
METALS (2020)
Fretting wear mechanism for harmonic, non-harmonic and conventional 316L stainless steels
Prabhat K. Rai et al.
WEAR (2019)
Effects of Microstructure on Mechanical Properties of Harmonic Structure Designed Pure Ni
Masaya Nagata et al.
MATERIALS TRANSACTIONS (2019)
Effect of bimodal harmonic structure on fatigue properties of austenitic stainless steel under axial loading
Shoichi Kikuchi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
A 3D crystal plasticity model of monotonic and cyclic simple shear deformation for commercial-purity polycrystalline Ti with a harmonic structure
Xiang Wang et al.
MECHANICS OF MATERIALS (2019)
Corrosion Behavior of Harmonic Structured 316L Stainless Steel in 3.5% NaCl and Simulated Body Fluid Solution
Prabhat K. Rai et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Evaluation of fatigue properties under four-point bending and fatigue crack propagation in austenitic stainless steel with a bimodal harmonic structure
Shoichi Kikuchi et al.
FRATTURA ED INTEGRITA STRUTTURALE (2019)
Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy
Zezhou Li et al.
ACTA MATERIALIA (2018)
Twinning-induced plasticity (TWIP) steels
Bruno C. De Cooman et al.
ACTA MATERIALIA (2018)
A three-dimensional multi-scale polycrystalline plasticity model coupled with damage for pure Ti with harmonic structure design
Jia Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Fractographic analysis of fatigue crack initiation and propagation in CP titanium with a bimodal harmonic structure
Yuhei Nukui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Statistical fatigue properties and small fatigue crack propagation in bimodal harmonic structured Ti-6Al-4V alloy under four-point bending
Shoichi Kikuchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effects of grain size gradients on the fretting wear of a specially-processed low carbon steel against AISI E52100 bearing steel
Prabhat K. Rai et al.
WEAR (2018)
Additional hardening in harmonic structured materials by strain partitioning and back stress
Hyung Keun Park et al.
MATERIALS RESEARCH LETTERS (2018)
Conventional vs harmonic-structured beta-Ti-25Nb-25Zr alloys: A comparative study of deformation mechanisms
F. Mompiou et al.
ACTA MATERIALIA (2018)
Mechanical properties and microstructure in a fine grained Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy deformed at a high strain rate
Bingfeng Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Evaluation of near-threshold fatigue crack propagation in harmonic-structured CP titanium with a bimodal grain size distribution
Shoichi Kikuchi et al.
ENGINEERING FRACTURE MECHANICS (2017)
Functionalization of New Biocompatible Titanium Alloys with Harmonic Structure Design by Using UV Irradiation
G. Amokrane et al.
IRBM (2017)
Wear Behavior of Harmonic Structured 304L Stainless Steel
Prabhat K. Rai et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Dynamic Hall-Petch versus grain-size gradient effects on the mechanical behavior under simple shear loading of 13-titanium Ti-25Nb-25Zr alloys
G. Dirras et al.
MATERIALS LETTERS (2017)
Effect of bimodal grain size distribution on fatigue properties of Ti-6A1-4V alloy with harmonic structure under four-point bending
Shoichi Kikuchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Fatigue behavior of a harmonic structure designed austenitic stainless steel under uniaxial stress loading
Zhe Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals
Evan Ma et al.
MATERIALS TODAY (2017)
Cyclic shear behavior of conventional and harmonic structure-designed Ti-25Nb-25Zr β-titanium alloy: Back-stress hardening and twinning inhibition
G. Dirras et al.
SCRIPTA MATERIALIA (2017)
Heterogeneous materials: a new class of materials with unprecedented mechanical properties
Xiaolei Wu et al.
MATERIALS RESEARCH LETTERS (2017)
Dynamic deformation and failure of ultrafine-grained titanium
Zezhou Li et al.
ACTA MATERIALIA (2017)
Effect of harmonic structure design with bimodal grain size distribution on near-threshold fatigue crack propagation in Ti-6Al-4V alloy
Shoichi Kikuchi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Effect of bimodal harmonic structure design on the deformation behaviour and mechanical properties of Co-Cr-Mo alloy
Sanjay Kumar Vajpai et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Three-Dimensionally Gradient and Periodic Harmonic Structure for High Performance Advanced Structural Materials
Sanjay Kumar Vajpai et al.
MATERIALS TRANSACTIONS (2016)
Effect of Harmonic Microstructure on the Corrosion Behavior of SUS304L Austenitic Stainless Steel
Prabhat K. Rai et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials
Sanjay Kumar Vajpai et al.
MATERIALS RESEARCH LETTERS (2016)
Back stress strengthening and strain hardening in gradient structure
Muxin Yang et al.
MATERIALS RESEARCH LETTERS (2016)
Strength and ductility of gradient structured copper obtained by surface mechanical attrition treatment
Zhe Yin et al.
MATERIALS & DESIGN (2016)
Adiabatic shear localization in a near beta Ti-5Al-5Mo-5 V-1Cr-1Fe alloy
Bingfeng Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Application of High Pressure Gas Jet Mill Process to Fabricate High Performance Harmonic Structure Designed Pure Titanium
Mie Ota et al.
MATERIALS TRANSACTIONS (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
The Development of High Performance Ti-6Al-4V Alloy via a Unique Microstructural Design with Bimodal Grain Size Distribution
Sanjay Kumar Vajpai et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics
Zhe Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Role of Nanostructure in Electrochemical Corrosion and High Temperature Oxidation: A Review
B. V. Mahesh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
The use of the direct impact Hopkinson pressure bar technique to describe thermally activated and viscous regimes of metallic materials
Herve Couque
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2014)
Extraordinary strain hardening by gradient structure
XiaoLei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
A TEM in situ study of alloying effects in iron. II-Solid solution hardening caused by high concentrations of Si and Cr
D. Caillard
ACTA MATERIALIA (2013)
In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium
Frederic Mompiou et al.
ACTA MATERIALIA (2012)
Effect of grain size on corrosion of high purity aluminium
K. D. Ralston et al.
ELECTROCHIMICA ACTA (2011)
Effect of Grain Size on Corrosion: A Review
K. D. Ralston et al.
CORROSION (2010)
Fine-grained nickel deformed by direct impact at different velocities: Microstructure and mechanical properties
G. Dirras et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography
Eralp Demir et al.
ACTA MATERIALIA (2009)
Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel
M. Anthony Xavior et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A different viewpoint on adiabatic shear localization
D. Rittel
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2009)
Thermo-mechanical aspects of adiabatic shear failure of AM50 and Ti6Al4V alloys
D. Rittel et al.
MECHANICS OF MATERIALS (2008)
Experimental study of dislocation mobility in a Ti-6Al-4V alloy
P. Castany et al.
ACTA MATERIALIA (2007)
Effect of surface nanocrystallization on corrosion and corrosion inhibition of low carbon steel: Synergistic effect of methionine and iodide ion
E. E. Oguzie et al.
ELECTROCHIMICA ACTA (2007)
Friction and wear behaviors of nanocrystalline surface layer of pure copper
Y. S. Zhang et al.
WEAR (2006)
Mechanical, electrochemical and tribological properties of nano-crystalline surface of 304 stainless steel
XY Wang et al.
WEAR (2003)
Crystallographic plasticity in fretting of Ti-6AL-4V
CH Goh et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing
N Tsuji et al.
SCRIPTA MATERIALIA (2002)
High tensile ductility in a nanostructured metal
YM Wang et al.
NATURE (2002)
Short-range order (SRO) and its effect on the primary creep behavior of a Ti-6wt.%Al alloy
T Neeraj et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Effect of grain size on friction and wear behavior of Ti3SiC2
T El-Raghy et al.
WEAR (2000)
A new view on transformation induced plasticity (TRIP)
FD Fischer et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
分享论文
