☆ 4.4 Article

Conjugate Heat Transfer and Flow Features of Single-Hole and Combined-Hole Film Cooling With Rib-Roughened Internal Passages

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

An Experimental Study of Sister Holes Film Cooling With Various Secondary-to-Primary Hole Diameter Ratios

Rui Zhu et al.

Summary: Experimental investigation has shown that adding secondary film-cooling holes can significantly improve film-cooling effectiveness, especially at high blowing rates. Secondary holes create an antikidney vortex structure, weakening the main kidney vortex pair, which enhances the attachment of coolant to the surface for more effective spreading. However, adding secondary holes also leads to increased heat transfer coefficients, particularly at high blowing rates.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Thermodynamics

Large Eddy Simulations for Film Cooling Assessment of Cylindrical and Laidback Fan-Shaped Holes With Reverse Injection

Ashutosh Kumar Singh et al.

Summary: The study investigated the film cooling performance of cylindrical and reverse shaped holes for forward and reverse injection configurations using large eddy simulations, showing that the reverse shaped hole outperforms the cylindrical hole in terms of cooling effectiveness.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2021)

添加到收藏夹

Review Thermodynamics

Combined-Hole Film Cooling Designs Based on the Construction of Antikidney Vortex Structure: A Review

Rui Zhu et al.

Summary: Film cooling is an efficient and widely used cooling method for high-temperature components, with combined-hole designs being able to enhance cooling effectiveness and reduce machining difficulty.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Thermodynamics

Film cooling characteristics of cross-flow coolant passage with various relative positions of holes and inclined ribs

Cun-liang Liu et al.

Summary: The study investigated the application of ribbed cross-flow coolant channels with film hole effusion and the effects of internal cooling configuration on film cooling performance. Results showed that the position of film holes and orientation of ribs had consistent effects on the outlet velocity distribution of the film holes, jet pattern, and discharge coefficient based on different position cases.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Experimental Study on the Influence of Film Cooling Hole Extraction on Heat Transfer and Flow Field in Internal Ribbed Cooling Channels of Turbine Blades

Marlene Boettger et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2020)

添加到收藏夹

Article Thermodynamics

Simulation of air/mist cooling in a conjugate, 3-D gas turbine vane with internal passage and external film cooling

Ramy Abdelmaksoud et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Flow and heat transfer characteristics of mist/steam two-phase flow in the U-shaped cooling passage with 60 deg. ribs

Guangwen Jiang et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Engineering, Aerospace

Experimental Investigation on Effect of Cross-Flow Reynolds Number on Film Cooling Effectiveness

Lin Ye et al.

AIAA JOURNAL (2019)

添加到收藏夹

Article Thermodynamics

Vortex dynamics based analysis of internal crossflow effect on film cooling performance

Ziyu Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Engineering, Mechanical

Effect of Internal Crossflow Velocity on Film Cooling Effectiveness-Part II: Compound Angle Shaped Holes

John W. McClintic et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Mechanical

Effect of Internal Crossflow Velocity on Film Cooling Effectiveness-Part I: Axial Shaped Holes

John W. McClintic et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Thermodynamics

Influence of secondary hole injection angle on enhancement of film cooling effectiveness with horn-shaped or cylindrical primary holes

Rui Zhu et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2018)

添加到收藏夹

Article Thermodynamics

Experimental and numerical study of the effect of conjugate heat transfer on film cooling

Ben Lu et al.

EXPERIMENTAL HEAT TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Investigation on the effects of rib orientation angle on the film cooling with ribbed cross-flow coolant channel

Cun-liang Liu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Turbulent flow characteristics and heat transfer enhancement in a square channel with various crescent ribs on one wall

Gongnan Xie et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Film cooling performance and flow characteristics of internal cooling channels with continuous/truncated ribs

Gongnan Xie et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Engineering, Aerospace

Optimization of a fan-shaped hole to improve film cooling performance by RBF neural network and genetic algorithm

Chunhua Wang et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Thermodynamics

A numerical investigation of film cooling performance through variations in the location of discrete sister holes

Siavash Khajehhasani et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Effects of rib arrangements on the flow pattern and heat transfer in an internally ribbed heat exchanger tube

Nianben Zheng et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

添加到收藏夹

Article Thermodynamics

Conjugated heat transfer analysis of a film cooling passage with different rib configurations

Jin Wang et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2015)

添加到收藏夹

Article Thermodynamics

Evaluation of CFD simulations of film cooling performance on a turbine vane including conjugate heat transfer effects

Thomas E. Dyson et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2014)

添加到收藏夹

Article Thermodynamics

Flow structure and heat transfer in a square passage with offset mid-truncated ribs

Gongnan Xie et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Engineering, Mechanical

Film Cooling Extraction Effects on the Aero-Thermal Characteristics of Rib Roughened Cooling Channel Flow

Beni Cukurel et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2013)

添加到收藏夹

Article Thermodynamics

Fundamental Gas Turbine Heat Transfer

Je-Chin Han

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2013)

添加到收藏夹

Article Thermodynamics

Effect of Rib Spacing on Heat Transfer in a Two Pass Rectangular Channel (AR=2:1) at High Rotation Numbers

Jiang Lei et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Article Thermodynamics

Effects of Turbulence Promoters of Gas Turbine Blades on Film Cooling Performance

Yukiko Agata et al.

JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Thermodynamics

Heat Transfer and Pressure Drop Correlations for Square Channels With V-Shaped Ribs at High Reynolds Numbers

Nawaf Y. Alkhamis et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2011)

添加到收藏夹

Article Thermodynamics

A numerical evaluation on the effect of sister holes on film cooling effectiveness and the surrounding flow field

Marc J. Ely et al.

HEAT AND MASS TRANSFER (2009)

添加到收藏夹

Article Thermodynamics

A Numerical Study on Improving Large Angle Film Cooling Performance through the Use of Sister Holes

Marc J. Ely et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2009)

添加到收藏夹

Article Thermodynamics

Film cooling effectiveness of an advanced-louver cooling scheme for gas turbines

X. Z. Zhang et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2006)

添加到收藏夹

Article Engineering, Aerospace

Gas turbine film cooling

DG Bogard et al.

JOURNAL OF PROPULSION AND POWER (2006)

添加到收藏夹

Article Thermodynamics

Conjugate Heat Transfer Analysis of Film Cooling Flows

Xiaochen Lu et al.

JOURNAL OF THERMAL SCIENCE (2006)

添加到收藏夹

Article Engineering, Aerospace

Turbine blade internal cooling passages with rib turbulators

JC Han et al.

JOURNAL OF PROPULSION AND POWER (2006)

添加到收藏夹

Article Engineering, Mechanical

Effect of internal coolant crossflow on the effectiveness of shaped film-cooling holes

M Gritsch et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2003)

添加到收藏夹

Article Engineering, Mechanical

A converging slot-hole film-cooling geometry - Part 1: Low-speed flat-plate heat transfer and loss

JE Sargison et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2002)

添加到收藏夹

Article Engineering, Mechanical

A converging slot-hole film-cooling geometry - Part 2: Transonic nozzle guide vane heat transfer and loss

JE Sargison et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.