相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect of Ni content on the transformation behavior and mechanical property of NiTi shape memory alloys fabricated by laser powder bed fusion
Shifeng Wen et al.
OPTICS AND LASER TECHNOLOGY (2021)
Study on performance optimization of 316L stainless steel parts by High-Efficiency Selective Laser Melting
Yude Liu et al.
OPTICS AND LASER TECHNOLOGY (2021)
Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting
Taban Larimian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Properties of 316L formed by a 400 W power laser Selective Laser Melting with 250 μm layer thickness
Wentian Shi et al.
POWDER TECHNOLOGY (2020)
Automatic generation of alternative build orientations for laser powder bed fusion based on facet clustering
Yuchu Qin et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Application of optimized laser surface re-melting process on selective laser melted 316L stainless steel inclined parts
Jafar Ghorbani et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments
S. L. Sing et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
Jinliang Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels
Zan Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L
Mostafa Yakout et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Influence of build orientation on microstructure, mechanical and corrosion behavior of Inconel 718 processed by selective laser melting
Dafan Du et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of Laser Processing Strategy and Remelting on Surface Structure and Porosity Development during Selective Laser Melting of a Metallic Material
Chunlei Qiu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Computer simulation of microstructure evolution in strip-cast silicon steel with cube and fibre texture
Sheuli Hore et al.
PHILOSOPHICAL MAGAZINE (2019)
Mechanical properties of lightweight 316L stainless steel lattice structures fabricated by selective laser melting
Tianlin Zhong et al.
MATERIALS & DESIGN (2019)
Impact of the scanning strategy on the mechanical behavior of 316L steel synthesized by selective laser melting
O. O. Salman et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Phase Field Simulations of Microstructure Evolution in IN718 Using a Surrogate Ni-Fe-Nb Alloy during Laser Powder Bed Fusion
Balasubramaniam Radhakrishnan et al.
METALS (2019)
Research on mechanical properties and microstructure by selective laser melting of 316L stainless steel
Pan Lu et al.
MATERIALS RESEARCH EXPRESS (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Three-dimensional modeling of the microstructure evolution during metal additive manufacturing
O. Zinovieva et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review
H. Shipley et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L
Wakshum M. Tucho et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
Tomasz Kurzynowski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti-6Al-4V alloy during solid-solid phase transformation in additive manufacturing
Shaohua Chen et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2018)
Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel
Yang Liu et al.
OPTICS AND LASER TECHNOLOGY (2018)
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
Zhongji Sun et al.
NPG ASIA MATERIALS (2018)
Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting
Bandar AlMangour et al.
MATERIALS & DESIGN (2018)
Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review
Babis Schoinochoritis et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Effects of laser power on the microstructure and mechanical properties of 316L stainless steel prepared by selective laser melting
Zeng Zheng et al.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2017)
Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
E. Liverani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Mechanical behavior of selective laser melted 316L stainless steel
Jyoti Suryawanshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys
Trevor Keller et al.
ACTA MATERIALIA (2017)
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Theron M. Rodgers et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data
Evdokia Popova et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2017)
Prediction of microstructure in laser powder bed fusion process
Ranadip Acharya et al.
ACTA MATERIALIA (2017)
Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6
Z. Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
Mesoscale modeling and simulation of microstructure evolution during dynamic recrystallization of a Ni-based superalloy
Fei Chen et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
Yuan Zhong et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting
G. Miranda et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Densification Behavior of 316L Stainless Steel Parts Fabricated by Selective Laser Melting by Variation in Laser Energy Density
Joon-Phil Choi et al.
MATERIALS TRANSACTIONS (2016)
Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method
A. Zinoviev et al.
MATERIALS & DESIGN (2016)
Effect of manufacturing parameters on mechanical properties of 316L stainless steel parts fabricated by selective laser melting: A computational framework
Arman Ahmadi et al.
MATERIALS & DESIGN (2016)
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts
Di Wang et al.
MATERIALS & DESIGN (2016)
Selective laser melting of stainless steel 316L with low porosity and high build rates
Zhongji Sun et al.
MATERIALS & DESIGN (2016)
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Aref Yadollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder
Yang Liu et al.
MATERIALS & DESIGN (2015)
Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W
Chandrika Kamath et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Compositionally graded metals: A new frontier of additive manufacturing
Douglas C. Hofmann et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures
A. Mertens et al.
POWDER METALLURGY (2014)
Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder
I. Yadroitsev et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting
Ahmed Hussein et al.
MATERIALS & DESIGN (2013)
The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder
Baicheng Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effects of the Processing Parameters on the Forming Quality of Stainless Steel Parts by Selective Laser Melting
Qingsong Wei et al.
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5 (2011)
A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing
I. A. Roberts et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Effects of processing parameters on the temperature field of selective laser melting metal powder
Ruidi Li et al.
POWDER METALLURGY AND METAL CERAMICS (2009)
Measurements and Monte Carlo simulation of grain growth in the heat-affected zone of Ti-6Al-4V welds
S Mishra et al.
ACTA MATERIALIA (2004)
Simulation of liquid phase sintering using the Monte Carlo method
J Aldazabal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Micro-macro simulation of sintering process by coupling Monte Carlo and finite element methods
K Mori et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)
分享论文
