相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Thermal stability and machining performance of arc evaporated Ti1-xAlxN hard PVD coatings with x=0.5 - 0.73 ratios using an integrative approach
A. Hemmati et al.
MATERIALIA (2021)
Study of wear performance and tribological characterization of AlTiN PVD coatings with different Al/Ti ratios during ultra-high speed turning of stainless steel 304
Qianxi He et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)
An integrative approach to coating/carbide substrate design of CVD and PVD coated cutting tools during the machining of austenitic stainless steel
Q. He et al.
CERAMICS INTERNATIONAL (2020)
Influence of secondary carbides on microstructure, wear mechanism, and tool performance for different cermet grades during high-speed dry finish turning of AISI 304 stainless steel
Uttkarsh S. Patel et al.
WEAR (2020)
The influence of residual stress on the properties and performance of thick TiAlN multilayer coating during dry turning of compacted graphite iron
Majid Abdoos et al.
WEAR (2020)
Thin-Film PVD Coating Metamaterials Exhibiting Similarities to Natural Processes under Extreme Tribological Conditions
G. S. Fox-Rabinovich et al.
NANOMATERIALS (2020)
Guidelines for increasing the oxidation resistance of Ti-Al-N based coatings
R. Hollerweger et al.
THIN SOLID FILMS (2019)
Nanocomposite (Ti,Al,Cr,Si)N HPPMS coatings for high performance cutting tools
K. Bobzin et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Improving surface integrity aspects of AISI 316L in the context of bioimplant applications
Sadaf Zahoor et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Characterization and prediction of chip formation dynamics in machining austenitic stainless steel through supply of a high-pressure coolant
Y. Seid Ahmed et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Micro-impact testing of AlTiN and TiAlCrN coatings
Ben D. Beake et al.
WEAR (2019)
Investigation on machining induced surface and subsurface modifications on the stress corrosion crack growth behaviour of super duplex stainless steel
J. Rajaguru et al.
CORROSION SCIENCE (2018)
Influence of phase transformation on the damage tolerance of Ti-Al-N coatings
M. Bartosik et al.
VACUUM (2018)
Investigation of effects of cutting insert rake face forms on surface integrity
Huseyin Gurbuz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Surface/interface phenomena in nano-multilayer coating under severing tribological conditions
G. S. Fox-Rabinovich et al.
SURFACE AND INTERFACE ANALYSIS (2017)
Frictional and wear performance of hard coatings during machining of superduplex stainless steel
Jose M. F. de Paiva et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Relationship of microstructure, mechanical properties and hardened steel cutting performance of TiSiN-based nanocomposite coated tool
Yaohui Yuan et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Effect of machining-induced surface residual stress on initiation of stress corrosion cracking in 316 austenitic stainless steel
Wenqian Zhang et al.
CORROSION SCIENCE (2016)
Tribo-films control in adaptive TiAlCrSiYN/TiAlCrN multilayer PVD coating by accelerating the initial machining conditions
Junfeng Yuan et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Role of tribofilms in wear protection
Andrew R. Konicek et al.
TRIBOLOGY INTERNATIONAL (2016)
Influence of milling on the development of stress corrosion cracks in austenitic stainless steel
K. N. Lyon et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Spatio-temporal behaviour of atomic-scale tribo-ceramic films in adaptive surface engineered nano-materials
G. Fox-Rabinovich et al.
SCIENTIFIC REPORTS (2015)
Evolution of self-organization in nano-structured PVD coatings under extreme tribological conditions
G. Fox-Rabinovich et al.
APPLIED SURFACE SCIENCE (2014)
Microhardness and Surface Integrity in Turning Process of Duplex Stainless Steel (DSS) for Different Cutting Conditions
G. Krolczyk et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Thermal stability and oxidation resistance of arc evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN coatings
C. M. Koller et al.
SURFACE & COATINGS TECHNOLOGY (2014)
The effect of cutting speed and feed rate on the surface integrity in dry turning of CoCrMo alloy
A. Bordin et al.
2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI) (2014)
Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
M. H. Miguelez et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings
Richard Rachbauer et al.
ACTA MATERIALIA (2012)
Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in machining Ti6Al4V
Z. P. Wan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Hierarchical adaptive nanostructured PVD coatings for extreme tribological applications: the quest for nonequilibrium states and emergent behavior
German S. Fox-Rabinovich et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2012)
Thermal stability and oxidation resistance of Ti-Al-N coatings
Li Chen et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Surface layer microhardness changes with high-speed turning of hardened steels
J. Kundrak et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Decomposition pathways in age hardening of Ti-Al-N films
R. Rachbauer et al.
JOURNAL OF APPLIED PHYSICS (2011)
Deformation induced martensite in AISI 316 stainless steel
N. Solomon et al.
REVISTA DE METALURGIA (2010)
Emergent behavior of nano-multilayered coatings during dry high-speed machining of hardened tool steels
G. S. Fox-Rabinovich et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Design and performance of AlTiN and TiAlCrN PVD coatings for machining of hard to cut materials
G. S. Fox-Rabinovich et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Tribological compatibility and improvement of machining productivity and surface integrity
S. C. Veldhuis et al.
TRIBOLOGY INTERNATIONAL (2009)
Impact of Al and Cr alloying in TiN-based PVD coatings on cutting performance during machining of hard to cut materials
A. I. Kovalev et al.
VACUUM (2009)
Nanocrystalline coating design for extreme applications based on the concept of complex adaptive behavior
G. S. Fox-Rabinovich et al.
JOURNAL OF APPLIED PHYSICS (2008)
Features of self-organization in ion modified nanocrystalline plasma vapor deposited AlTiN coatings under severe tribological conditions
G. Fox-Rabinovich et al.
JOURNAL OF APPLIED PHYSICS (2007)
Wear mechanisms and tool performance of TiAlNPVD coated inserts during machining of AISI 4140 steel
Samir K. Khrais et al.
WEAR (2007)
Investigation of nano-structured PVD coatings for dry high-speed machining
Li Ning et al.
MACHINING SCIENCE AND TECHNOLOGY (2007)
Impact of annealing on microstructure, properties and cutting performance of an AlTiN coating
G. S. Fox-Rabinovich et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Influence of the Al distribution on the structure, elastic properties, and phase stability of supersaturated Ti1-xAlxN
P. H. Mayrhofer et al.
JOURNAL OF APPLIED PHYSICS (2006)
Self-adaptive wear behavior of nano-multilayered TiAlCrN/WN coatings under severe machining conditions
G. S. Fox-Rabinovich et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Hard AlTiN, AlCrNPVD coatings for machining of austenitic stainless steel
J. L. Endrino et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Residual stresses in turning - Part I Influence of process parameters
E Capello
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Mechanical properties and machining performance of Ti1-xAlxN-coated cutting tools
A Hörling et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Nano-crystalline filtered arc deposited (FAD) TiAlNPVD coatings for high-speed machining applications
GS Fox-Rabinovich et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Thin films and self-organization during friction under the current collection conditions
JS Gershman et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Tribological properties and dry machining characteristics of PVD-coated carbide inserts
BC Schramm et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Properties of (Ti,Cr,AI)N coatings with high Al content deposited by new plasma enhanced arc-cathode
K Yamamoto et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Surface integrity in finish hard turning of case-hardened steels
J Rech et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Cutting speed influence on surface integrity of hard turned bainite steel
M Jacobson et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Modeling of tool wear by diffusion in metal cutting
A Molinari et al.
WEAR (2002)
Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling
A Molinari et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2002)
Tool wear and surface integrity during high-speed turning of hardened steel with polycrystalline cubic boron nitride tools
HA Kishawy et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2001)
Surface integrity of die material in high speed hard machining, part 1: Micrographical analysis
TI El-Wardany et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2000)