☆ 4.6 Article

A high-entropy spinel ceramic oxide as the cathode for proton-conducting solid oxide fuel cells

JOURNAL OF ADVANCED CERAMICS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Triggering interfacial activity of the traditional La0.5Sr0.5MnO3 cathode with Co-doping for proton-conducting solid oxide fuel cells

Yanru Yin et al.

Summary: Doping Co into the LSM cathode triggers enhanced activity at the cathode/electrolyte interface in composite cathodes, leading to significantly improved fuel cell performance. This highlights the importance of interfacial design for the cathodes of proton-conducting solid oxide fuel cells.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-performance proton-conducting solid oxide fuel cells using the first-generation Sr-doped LaMnO3 cathode tailored with Zn ions

Shuai Wu et al.

Summary: The Sr and Zn co-doped LaMnO3 (LSMZ) cathode demonstrates superior performance and stability in proton-conducting solid oxide fuel cells (H-SOFCs), outperforming all reported LSM-based H-SOFCs; LSMZ is stable against CO2 and exhibits good long-term stability, paving a new way for research on intermediate temperature SOFC cathodes.

SCIENCE CHINA-MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tailoring Sr2Fe1.5MO0.5O6-δ with Sc as a new single-phase cathode for proton-conducting solid oxide fuel cells

Liling Zhang et al.

Summary: Sc-doped Sr2Fe1.5MO0.5O6-delta shows improved proton diffusion rate, reduced vacancy formation energy and increased catalytic activity. The H-SOFC based on SFMSc cathode exhibits excellent performance and stability.

SCIENCE CHINA-MATERIALS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Optimal preparation of high-entropy boride-silicon carbide ceramics

Yan Zhang et al.

Summary: This study examined the effects of using borothermal and boro/carbothermal reduction methods in fabricating high-entropy boride-silicon carbide (HEB-SiC) ceramics. It was found that spark plasma sintering at 2000 degrees C could achieve HEB-SiC ceramics with > 98% theoretical density, and the addition of SiC resulted in slight coarsening of the microstructure. The results suggested that the choice of powder processing method and the inclusion of SiC phase could optimize the preparation of high-entropy boride-based ceramics.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Defect engineering for electrocatalytic nitrogen reduction reaction at ambient conditions

Yangsen Xu et al.

Summary: This paper introduces the latest progress in using defects such as oxygen, nitrogen, sulfur, and carbon to enhance catalytic performance in nitrogen reduction reaction, and points out the future direction of defect engineering design for NRR catalysts.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2021)

添加到收藏夹

Article Chemistry, Physical

A novel facile strategy to suppress Sr segregation for high-entropy stabilized La0.8Sr0.2MnO3-δ cathode

Yang Yang et al.

Summary: The study proposes a strategy to use high-entropy perovskite oxide as a cathode in solid oxide fuel cells to suppress Sr segregation during long-term operation, showing that high-entropy perovskite oxide is a potential cathode material.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Materials Science, Ceramics

A new class of high-entropy M3B4 borides

Mingde Qin et al.

Summary: A new class of high-entropy M3B4 borides with Ta3B4-prototyped orthorhombic structure has been synthesized in bulk form. The specimens were fabricated through reactive spark plasma sintering and showed high Vickers hardness values, expanding the family of reported high-entropy ceramics with different structures.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Electrochemistry

Improvement of the catalytic properties of porous lanthanum manganite for the oxygen reduction reaction by partial substitution of strontium for lanthanum

Qianqian Ji et al.

Summary: This study investigates the catalytic properties of lanthanum strontium manganite catalysts for the oxygen reduction reaction and identifies the most active catalyst formulation. The use of carbon spheres as templates to prepare porous La0.4Sr0.6MnO3 catalyst further enhances its catalytic activity, demonstrating the potential for improvement in ORR performance.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Tailoring electronic structure of perovskite cathode for proton-conducting solid oxide fuel cells with high performance

Xi Xu et al.

Summary: The study demonstrates that tailoring the electronic structure of perovskite oxide with Mo-doping leads to improvements in cathode materials for proton-conducting solid oxide fuel cells. The Mo-doping changes the electronic structure of the oxide, making the metal-oxygen bond less strong and the surface more active towards oxygen reduction, resulting in more feasible oxygen vacancy formation critical for protonation. The electric field induced by Mo-doping provides an additional driving force for proton movement, accelerating proton migration in the oxide and improving cathode performance.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Materials Science, Ceramics

Preparation and properties of CMAS resistant bixbyite structured high-entropy oxides RE2O3 (RE = Sm, Eu, Er, Lu, Y, and Yb): Promising environmental barrier coating materials for Al2O3f/Al2O3 composites

Yanan Sun et al.

Summary: Y2O3 is considered a potential environmental barrier coating material for Al2O3f/Al2O3 ceramic matrix composites due to its high melting point and similar thermal expansion coefficient to Al2O3. However, its high thermal conductivity and unsatisfactory CMAS resistance are major obstacles. High-entropy oxides RE2O3, such as (Eu0.2Er0.2Lu0.2Y0.2Yb0.2)(2)O-3 and (Sm0.2Er0.2Lu0.2Y0.2Yb0.2)(2)O-3, have been developed to address these issues, showing promising mechanical and thermal properties as well as excellent CMAS resistance.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Electrochemical performance of La2NiO4+δ-Ce0.55La0.45O2-δ as a promising bifunctional oxygen electrode for reversible solid oxide cells

Pengzhang Li et al.

Summary: By introducing different LDC contents in La2NiO4+delta-xCe(0.55)La(0.45)O(2-delta), it was found that LNO-30LDC exhibited lower polarization resistance, mainly attributed to the extended triple phase boundary and more oxygen ionic transfer channels. The hydrogen electrode supported single cell with LNO-30LDC oxygen electrode showed promising electrochemical performance at different temperatures.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Review Energy & Fuels

Progress in proton-conducting oxides as electrolytes for low-temperature solid oxide fuel cells: From materials to devices

Wei Zhang et al.

Summary: Solid oxide fuel cells operating at low temperatures (300-600 degrees C) have advantages for stationary and mobile electricity production, with proton-conducting oxides playing a critical role. Progress in proton-conducting solid oxide electrolytes for low-temperature SOFCs has been summarized, focusing on strategies to tune the structures and properties of proton-conducting oxides, techniques for improving performance of protonic ceramic-based SOFCs, and challenges and opportunities in the development of proton-conducting electrolyte-based PCFCs.

ENERGY SCIENCE & ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

A New Pd Doped Proton Conducting Perovskite Oxide with Multiple Functionalities for Efficient and Stable Power Generation from Ammonia at Reduced Temperatures

Fan He et al.

Summary: The use of a new Ba(Zr0.1Ce0.7Y0.1Yb0.1)(0.95)Pd0.05O3-delta perovskite as the key component in ammonia-fueled PCFCs improves catalytic activity for NH3 decomposition and increases proton conductivity, leading to higher power density and stability.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Materials Science, Ceramics

High-entropy ceramics: Present status, challenges, and a look forward

Huimin Xiang et al.

Summary: High-entropy ceramics are solid solutions of inorganic compounds with diverse crystal and electronic structures, providing large space for property tuning through band structure and phonon engineering. In addition to traditional strengthening, hardening, and low thermal conductivity, HECs exhibit new properties such as colossal dielectric constant and super ionic conductivity. Challenges in processing, characterization, and property predictions are highlighted, along with future directions for material exploration and in-depth characterization.

JOURNAL OF ADVANCED CERAMICS (2021)

添加到收藏夹

Review Electrochemistry

Density functional theory calculations for cathode materials of proton-conducting solid oxide fuel cells: A mini-review

Zhiruo Tao et al.

Summary: The application of Density Functional Theory (DFT) calculations in proton-conducting solid oxide fuel cells has shown promising results in predicting material properties and enhancing electrochemical performance, but limitations have also been observed. This mini-review focuses on exploring new cathode materials with high electrochemical performance and aims to bring attention to the interesting method.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

添加到收藏夹

Review Chemistry, Physical

Recent advances in layered Ln2NiO4+δ nickelates: fundamentals and prospects of their applications in protonic ceramic fuel and electrolysis cells

Artem P. Tarutin et al.

Summary: This work provides a comprehensive overview of layered nickelates as one of the most attractive oxygen electrode materials for protonic ceramic electrochemical cells. It emphasizes the unique advantages and research interests of these materials but points out the lack of in-depth reviews in the current literature.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Materials Science, Ceramics

Evaluating the effect of Pr-doping on the performance of strontium-doped lanthanum ferrite cathodes for protonic SOFCs

Jinming Ma et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Review Electrochemistry

Sintering aids for proton-conducting oxides - A double-edged sword? A mini review

Ji Li et al.

ELECTROCHEMISTRY COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Ca-containing Ba0.95Ca0.05Co0.4Fe0.4Zr0.1Y0.1O3-δ cathode with high CO2-poisoning tolerance for proton-conducting solid oxide fuel cells

Jun Li et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Materials Science, Ceramics

Defect structure and transport properties of (Co,Cr,Fe,Mn,Ni)3O4 spinel-structured high entropy oxide

Zbigniew Grzesik et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

High-entropy ceramics

Corey Oses et al.

NATURE REVIEWS MATERIALS (2020)

添加到收藏夹

Review Physics, Applied

Proton-conducting oxides for energy conversion and storage

Chuancheng Duan et al.

APPLIED PHYSICS REVIEWS (2020)

添加到收藏夹

Article Chemistry, Physical

Tailoring the Oxygen Vacancy to Achieve Fast Intrinsic Proton Transport in a Perovskite Cathode for Protonic Ceramic Fuel Cells

Rongzheng Ren et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

FeO6 Octahedral Distortion Activates Lattice Oxygen in Perovskite Ferrite for Methane Partial Oxidation Coupled with CO2 Splitting

Xianhua Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Engineering, Environmental

Progress in low-temperature solid oxide fuel cells with hydrocarbon fuels

Hanrui Su et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Physical

Pr2BaNiMnO7-δ double-layered Ruddlesden-Popper perovskite oxides as efficient cathode electrocatalysts for low temperature proton conducting solid oxide fuel cells

Qi Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Space charge layer effect at the platinum anode/BaZr0.9Y0.1O3-δ electrolyte interface in proton ceramic fuel cells

Min Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Electrochemistry

Cobalt-free nanofiber cathodes for proton conducting solid oxide fuel cells

Haidi Tang et al.

ELECTROCHEMISTRY COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Physical

First principles study on the oxygen reduction reaction of the La1-xSrxMnO3-δ coated Ba1-xSrxCo1-yFeyO3-δ cathode for solid oxide fuel cells

Xiaokang Lu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Densification and electrical conducting behavior of BaZr0.9Y0.1O3-δ proton conducting ceramics with NiO additive

Min Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Improving the performance of the Ba0.5Sr0.5Co0.8Fe0.2O3-δ cathode for Check for proton-conducting SOFCs by microwave sintering

Wenyun Liu et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Chemistry, Physical

A novel layered perovskite Nd(Ba0.4Sr0.4Ca0.2)Co1.6Fe0.4O5+δ as cathode for proton-conducting solid oxide fuel cells

Junyu Chen et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Chemistry, Physical

Tailoring cations in a perovskite cathode for proton-conducting solid oxide fuel cells with high performance

Xi Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

New reduced-temperature ceramic fuel cells with dual-ion conducting electrolyte and triple-conducting double perovskite cathode

Chuan Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Impressive performance of proton-conducting solid oxide fuel cells using a first-generation cathode with tailored cations

Xi Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Self-Assembled Triple-Conducting Nanocomposite as a Superior Protonic Ceramic Fuel Cell Cathode

Yufei Song et al.

JOULE (2019)

添加到收藏夹

Article Engineering, Chemical

Highly-conductive proton-conducting electrolyte membranes with a low sintering temperature for solid oxide fuel cells

Xi Xu et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailoring the Cathode-Electrolyte Interface with Nanoparticles for Boosting the Solid Oxide Fuel Cell Performance of Chemically Stable Proton-Conducting Electrolytes

Lei Bi et al.

SMALL (2018)

添加到收藏夹

Article Energy & Fuels

Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells

Sihyuk Choi et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Stable and Efficient Cathode for Fluorine-Containing Proton-Conducting Solid Oxide Fuel Cells

Yun Xie et al.

CHEMSUSCHEM (2018)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of one-step co-fired proton-conducting solid oxide fuel cells with the assistance of microwave sintering

Bin Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

An In Situ Formed, Dual-Phase Cathode with a Highly Active Catalyst Coating for Protonic Ceramic Fuel Cells

Yu Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Porous YFe0.5Co0.5O3 thin sheets as cathode for intermediate-temperature solid oxide fuel cells

Jiajia Cui et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects

Belma Talic et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Cu1.3Mn1.7O4 spinel coatings deposited by electrophoretic deposition on Crofer 22 APU substrates for solid oxide fuel cell applications

Zhihao Sun et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Energy & Fuels

Self-assembled dynamic perovskite composite cathodes for intermediate temperature solid oxide fuel cells

J. Felix Shin et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Materials Science, Ceramics

A novel BaCe0.5Fe0.3Bi0.2O3-δ perovskite-type cathode for proton-conducting solid oxide fuel cells

Duo Shan et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Chemistry, Physical

High performance cobalt-free Cu1.4Mn1.6O4 spinel oxide as an intermediate temperature solid oxide fuel cell cathode

Shuying Zhen et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Physical

Sm0.5Sr0.5CoO3-δ infiltrated Ce0.9Gd0.1O2-δ composite cathodes for high performance protonic ceramic fuel cells

Ling Zhao et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Readily processed protonic ceramic fuel cells with high performance at low temperatures

Chuancheng Duan et al.

SCIENCE (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Triple-Conducting Layered Perovskites as Cathode Materials for Proton-Conducting Solid Oxide Fuel Cells

Junyoung Kim et al.

CHEMSUSCHEM (2014)

添加到收藏夹

Article Chemistry, Physical

High-performance anode-supported solid oxide fuel cells based on nickel-based cathode and Ba(Zr0.1Ce0.7Y0.2)O3-δ electrolyte

Zhiwen Zhu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel Mn1.5Co1.5O4 spinel cathodes for intermediate temperature solid oxide fuel cells

Huanying Liu et al.

CHEMICAL COMMUNICATIONS (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Prediction of solid oxide fuel cell cathode activity with first-principles descriptors

Yueh-Lin Lee et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-performance composite cathodes with tailored mixed conductivity for intermediate temperature solid oxide fuel cells using proton conducting electrolytes

Emiliana Fabbri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.