☆ 4.6 Article

Fast-Track-Protocol for Optimization of Presurgical Planning in Acute Surgical Treatment of Acetabular Quadrilateral Plate Fractures Using 3D Printing Technology and Pre-Contoured Reconstruction Plates

APPLIED SCIENCES-BASEL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

A physical investigation of dimensional and mechanical characteristics of 3D printed nut and bolt for industrial applications

Ramesh Chand et al.

Summary: This study investigates the dimensional precision, surface properties, mechanical properties, and scanning electron microscope (SEM) of nut-bolt components fabricated using a multi-jet 3D printer. The findings show that the 3D printer is suitable for commercial production, although there is a decrease in mechanical properties when moving from one section to another.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Fused filament fabrication of nylon 6/66 copolymer: parametric study comparing full factorial and Taguchi design of experiments

Kaifur Rashed et al.

Summary: This study compares the differences between full factorial and Taguchi design of experiments (DoEs) in terms of their effects on the mechanical and surface properties of Nylon 6/66 in Fused Filament Fabrication (FFF) process. It also analyzes the failure mechanism and proposes a theory based on the results. The findings suggest that fill density has the greatest effect on properties, and Taguchi DoE is a more efficient technique.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Transient thermal finite-element analysis of fused filament fabrication process

Chitralekha Nahar et al.

Summary: This study simulates the fused filament fabrication (FFF) process using temperature-dependent thermal properties and investigates the effects of processing parameters on interface temperature and bond formation time. The results show that the first interface has the longest bond formation time, and higher temperatures of the extruder and envelope, larger extruder diameter, and lower convective heat transfer coefficient can increase the bond formation time.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Mechanical

Investigation of suitable material and adhesion promoter combinations for fused filament fabrication on flexible silicone build plates

Thomas Herzog et al.

Summary: To extend the vacuum-assisted multipoint moulding (VAMM) technology, the authors developed the enhanced vacuum-assisted multipoint moulding with additive attachments (EMMA) technology, which requires additive manufactured attachments on a curved silicone surface. This study investigates various filament and adhesion promoter combinations for fused filament fabrication (FFF) on silicone build plates. The results show that unheated silicone build plates are suitable for FFF with polylactide filament and various adhesion promoters, with the highest adhesion strength achieved using an adhesive foil. The study also demonstrates the differences in the first layer manifestation depending on the adhesion promoter used.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Pelvic Reconstruction Procedure for Custom-Made Prosthesis Design of Bone Tumor Surgical Treatments

Gilda Durastanti et al.

Summary: Limb salvage procedures in orthopaedic oncology have become more common with recent advancements in medical imaging, biomechanical modeling, and additive manufacturing. However, surgical reconstruction with metal implants after tumor resection in the pelvis remains challenging due to the complexity of anatomical structures involved. This study aims to provide a consistent procedure to guide surgeons and bioengineers in the design of proper implants.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Three-dimensional semi-automated volumetric assessment of the pulp space of teeth following regenerative dental procedures

Heeresh Shetty et al.

Summary: This study compared the accuracy of two artificial intelligence-based medical imaging programs, OsiriX MD and 3D Slicer, in estimating the volume of pulp space following regenerative endodontic procedures (REPs). The results showed a significant decrease in pulp space volume measured by both programs, with no significant difference in accuracy between them. 3D Slicer, an open-source software program, was found to be as accurate as the commercially available OsiriX MD in volumetric assessment of post-REP pulp space.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Engineering, Mechanical

Additive manufacturing a powerful tool for the aerospace industry

Mahyar Khorasani et al.

Summary: This study demonstrates how additive manufacturing can optimize designs to reduce production costs of complex components. The results show that AM can enhance production processes through customization, rapid prototyping, and geometrical freedom. Detailed analysis of manufacturing costs and effective production strategies were discussed in the study.

RAPID PROTOTYPING JOURNAL (2021)

添加到收藏夹

Article Engineering, Mechanical

The influence of process parameters on the impact resistance of 3D printed PLA specimens under water-absorption and heat-treated conditions

Pradeep Kumar Mishra et al.

Summary: The study analyzes the impact of water absorption and heat treatment on the impact strength of 3D printed specimens, proposing a low-cost post-processing technique to enhance impact strength significantly. Experimental findings highlight the importance of raster orientation in impact resistance, revealing post-processing heat treatment as a more convenient option compared to water absorption in terms of processing time and cost.

RAPID PROTOTYPING JOURNAL (2021)

添加到收藏夹

Review Radiology, Nuclear Medicine & Medical Imaging

Comprehensive Review of 3D Segmentation Software Tools for MRI Usable for Pelvic Surgery Planning

Alessio Virzi et al.

JOURNAL OF DIGITAL IMAGING (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Investigation of pelvic symmetry using CAD software

Maha S. Ead et al.

MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2020)

添加到收藏夹

Article Clinical Neurology

Cost-Effective Method for 3-Dimensional Printing Dynamic Multiobject and Patient-Specific Brain Tumor Models: Technical Note

Aaron Damon et al.

WORLD NEUROSURGERY (2020)

添加到收藏夹

Review Medicine, General & Internal

A Review on 3D-Printed Templates for Precontouring Fixation Plates in Orthopedic Surgery

Rodica Marinescu et al.

JOURNAL OF CLINICAL MEDICINE (2020)

添加到收藏夹

Article Veterinary Sciences

Digital Endocasting in Comparative Canine Brain Morphology

Kalman Czeibert et al.

FRONTIERS IN VETERINARY SCIENCE (2020)

添加到收藏夹

Article Orthopedics

Application of computer-assisted virtual surgical procedures and three-dimensional printing of patient-specific pre-contoured plates in bicolumnar acetabular fracture fixation

Kaifang Chen et al.

ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH (2019)

添加到收藏夹

Article Orthopedics

Ten-year outcomes of cementless anatomical femoral implants after 3D computed tomography planning. Follow-up note

Olivier Tostain et al.

ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH (2019)

添加到收藏夹

Article Medicine, General & Internal

Osteoporotic Pelvic Fractures

Ludwig Oberkircher et al.

DEUTSCHES ARZTEBLATT INTERNATIONAL (2018)

添加到收藏夹

Article Orthopedics

Computer-assisted surgery in acetabular fractures: Virtual reduction of acetabular fracture using the first patient-specific biomechanical model simulator

M. Boudissa et al.

ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH (2018)

添加到收藏夹

Article Critical Care Medicine

3D surgical printing for preoperative planning of trabecular augments in acetabular fracture sequel

Coral Sanchez-Perez et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2018)

添加到收藏夹

Article Critical Care Medicine

The design, production and clinical application of 3D patient-specific implants with drilling guides for acetabular surgery

B. J. Merema et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2017)

添加到收藏夹

Article Critical Care Medicine

Accurate fixation of plates and screws for the treatment of acetabular fractures using 3D-printed guiding templates: An experimental study

Xu Chen et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2017)

添加到收藏夹

Article Critical Care Medicine

Application of an innovative computerized virtual planning system in acetabular fracture surgery: A feasibility study

Huixiang Wang et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2016)

添加到收藏夹

Article Critical Care Medicine

A combination of three-dimensional printing and computer-assisted virtual surgical procedure for preoperative planning of acetabular fracture reduction

Canjun Zeng et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2016)

添加到收藏夹

Article Critical Care Medicine

3D surgical printing and pre contoured plates for acetabular fractures

Francisco Chana-Rodriguez et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Volumetric CT-based segmentation of NSCLC using 3D-Slicer

Emmanuel Rios Velazquez et al.

SCIENTIFIC REPORTS (2013)

添加到收藏夹

Article Radiology, Nuclear Medicine & Medical Imaging

3D Slicer as an image computing platform for the Quantitative Imaging Network

Andriy Fedorov et al.

MAGNETIC RESONANCE IMAGING (2012)

添加到收藏夹

Article Critical Care Medicine

Computer-assisted virtual surgical procedure for acetabular fractures based on real CT data

Yanling Hu et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2011)

添加到收藏夹

Article Critical Care Medicine

Acetabular both-column fractures: Essentials of operative management

Luca Pierannunzii et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2010)

添加到收藏夹

Article Orthopedics

Virtual 3D planning of acetabular fracture reduction

Musa Citak et al.

JOURNAL OF ORTHOPAEDIC RESEARCH (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.