4.6 Article

Biomass Fly Ash Self-Hardened Adsorbent Monoliths for Methylene Blue Removal from Aqueous Solutions

期刊

APPLIED SCIENCES-BASEL
卷 12, 期 10, 页码 -

出版社

MDPI
DOI: 10.3390/app12105134

关键词

biomass fly ash; self-hardening; green processing; bulk porous adsorbents; dye removal; micropollutants; sorption

资金

  1. Portugal 2020 through the European Regional Development Fund - FCT/MEC (PIDDAC) [POCI/01/0247/FEDER/21874, UIDB/50011/2020, UIDP/50011/2020, LA/P/0006/2020]
  2. Portuguese Foundation for Science and Technology (FCT)/Ministry of Science, Technology and Higher Education (MCTES) [UIDP/50017/2020+UIDB/50017/2020+LA/P/0094/2020]

向作者/读者索取更多资源

This study evaluated the feasibility of using biomass fly ash as a low-cost porous bulk adsorbent for methylene blue removal from wastewater. The results showed that the addition of aluminium powder increased the porosity of the samples, and the methylene blue removal efficiency reached 80% for the most porous samples.
Featured Application Development of inexpensive waste-based porous bulk adsorbents with methylene blue adsorption capacity. The use of methylene blue (MB) by several industries generates contaminated industrial wastewaters that must be purified before discharge into the environment. Its removal can be achieved by adsorption, and low-cost and easily available materials should be used as adsorbents. Biomass fly ash (BFA) generated from biomass combustion, for heat and power generation, is increasing worldwide since the process is considered CO2 neutral. However, most of the ash is still landfilled. This study aims to evaluate the valorisation of BFA as a low-cost porous bulk adsorbent for MB removal from wastewaters. The monoliths were obtained after 14 days of curing just after adding water and a porogenic agent (aluminium powder) to the BFA, using the self-hardening ability of this waste. The BFA was characterised for chemical (XRF) and mineralogical (XRD) composition, particle size distribution (laser diffraction-COULTER) and morphology (SEM). The monolith sample cured for 14 days was characterised for density, porosity (total and open), microstructure, compressive strength, and MB removal ability (batch tests). The results showed that the addition of aluminium powder (0.09 wt.%) promoted an increase in interconnected porosity and the MB removal efficiency reached 80% for the most porous samples. The equilibrium data for the adsorption process were well characterised by a type 2 Langmuir isotherm equation with a monolayer adsorption capacity (q(max)) that ranged from 0.22 to 0.66 mg/g.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.6
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据