4.4 Article

Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging

出版社

WILEY
DOI: 10.1002/jbm.b.33720

关键词

aging; flexural strength; mechanical cycling; phase transformation; yttria-stabilized tetragonal zirconia

向作者/读者索取更多资源

ObjectivesThis study evaluated the influence of two aging procedures on the biaxial flexural strength of yttria-stabilized tetragonal zirconia ceramics. Material and methods. Disc-shaped zirconia specimens and (ZE: E.max ZirCAD, Ivoclar; ZT: Zirkon Translucent, Zirkonzahn) (N=80) (empty set :12 mm; thickness:1.2 mm, ISO 6872) were prepared and randomly divided into four groups (n=10 per group) according to the aging procedures: C: Control, no aging; M: mechanical cycling (2 x 10(6) cycles/3.8 Hz/200 N); AUT: Aging in autoclave at 134 degrees C, 2 bar for 24 h; AUT+M: Autoclave aging followed by mechanical cycling. After aging, the transformed monoclinic zirconia (%) were evaluated using X-ray diffraction and surface roughness was measured using atomic force microscopy. The average grain size was measured by scanning electron microscopy and the specimens were submitted to biaxial flexural strength testing (1 mm/min, 1000 kgf in water). Data (MPa) were statistically analyzed using 2-way analysis of variance and Tukey's test (=0.05). Results. Aging procedures significantly affected (p=0.000) the flexural strength data but the effect of zirconia type was not significant (p=0.657). AUT(ZT) (936.4 +/- 120.9(b)) and AUT+M-ZE (867.2 +/- 49.3(b)) groups presented significantly higher values (p<0.05) of flexural strength than those of the control groups (C-ZT: 716.5 +/- 185.7(a); C-ZE: 779.9 +/- 114(a)) (Tukey's test). The monoclinic phase percentage (%) was higher for AUT(ZE) (71), AUT(ZT) (66), AUT+M-ZE (71), and AUT+M-ZM (66) compared to the C groups (ZE:0; ZT:0). Surface roughness (mu m) was higher for AUT(ZE) (0.09), AUT(ZT) (0.08), AUT+M-ZE (0.09 mu m), and AUT+M-ZT (0.09 mu m) than those of other groups. Conclusions. Regardless of the zirconia type, autoclave aging alone or with mechanical aging increased the flexure strength but also induced higher transformation from tetragonal to monoclinic phase in both zirconia materials tested. (c) 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1972-1977, 2017.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.4
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据