4.7 Article

Ag-Modified Porous Perovskite-Type LaFeO3 for Efficient Ethanol Detection

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Ultrathin 2D NbWO6 Perovskite Semiconductor Based Gas Sensors with Ultrahigh Selectivity under Low Working Temperature

Jing Wang et al.

Summary: In this study, 2D all-inorganic NbWO6 perovskite nanosheets with thicknesses down to 1.5 nm were synthesized by liquid exfoliation, showing high selectivity, sensitivity, and fast response in hydrogen sulfide detection. This work highlights the potential of low-dimensional, nontoxic, and wide-bandgap perovskite semiconductors for high-performance gas sensors working in ambient conditions.

ADVANCED MATERIALS (2022)

Article Chemistry, Analytical

Tunable oxygen vacancies of cobalt oxides for efficient gas sensing application

Yushu Shi et al.

Summary: This study successfully detected triethylamine (TEA) using newly generated p-type Co3O4 nanosheets with rich oxygen vacancies, showing high sensitivity, excellent selectivity, and stability at an operating temperature of 200 degrees Celsius. By controlling annealing temperature to adjust oxygen vacancies and particle morphologies, a new approach for designing p-type metal oxide semiconductor nanomaterials for gas sensing applications was proposed.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Engineering, Environmental

Phosphorus-doped porous perovskite LaFe1-xPxO3-δ nanosheets with rich surface oxygen vacancies for ppb level acetone sensing at low temperature

Wenbo Qin et al.

Summary: In this study, P-doped perovskite LaFe1-xPxO3-delta with abundant Ov defects were prepared and utilized as sensors for acetone detection. The LaFe0.99P0.01O3-delta sensor exhibited excellent gas-sensitive performance, with nearly twofold improvement in response value and a detection limit at the ppb level. Electron paramagnetic resonance and X-ray photoelectron spectroscopy confirmed the strong correlation between the sensing characteristics and the Ov defects. Theoretical analysis revealed that P doping induced Ov defects and modulated the energy levels of the material, enhancing chemisorbed oxygen species and intermolecular interactions.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

LnFeO3 (Ln=La, Nd, Sm) derived from bimetallic organic frameworks for gas sensor

Guozheng Zhang et al.

Summary: In this paper, a simple method for the preparation of perovskite-type oxides was reported, achieving controllable morphologies and obtaining materials with oxygen-vacancy rich structures. The LaFeO3-based sensor showed outstanding gas sensing performance at a relatively low temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Letter Materials Science, Multidisciplinary

MgO intercalation and crystallization between epitaxial graphene and Ru(0001)

Xue-Yan Wang et al.

RARE METALS (2022)

Article Chemistry, Analytical

Hierarchically structured LaFeO3 with hollow core and porous shell as efficient sensing material for ethanol detection

Thi To Nga Phan et al.

Summary: The hollow LaFeO3 sensor synthesized by a hydrothermal method with cetyl-trimethylammonium bromide exhibited enhanced sensing performance towards ethanol gas, showing potential for future practical use in trace ethanol detection.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Materials Science, Multidisciplinary

Microstructure, magnetic properties of hexagonal barium ferrite powder based on calcination temperature and holding time

Si-Yun Shen et al.

Summary: Research on the calcination conditions of barium ferrite powder shows that low temperature and long holding time are beneficial for obtaining homogeneous grain size and excellent magnetic properties.

RARE METALS (2021)

Article Materials Science, Multidisciplinary

Enhanced formaldehyde sensitivity of two-dimensional mesoporous SnO2 by nitrogen-doped graphene quantum dots

Zhen-Lu Chen et al.

Summary: The synthesis of N-GQDs/SnO2 nanocomposite for HCHO detection showed high efficiency and extended the research and application potential of GQDs nanocomposites.

RARE METALS (2021)

Article Engineering, Environmental

Orthorhombically distorted perovskite SeZnO3 nanosheets as an electrocatalyst for lithium-oxygen batteries

Yoon Seon Kim et al.

Summary: Perovskite SeZnO3 nanosheets synthesized through a wet chemistry method exhibited a high oxygen vacancy concentration and abundant surface defects, showing excellent catalytic activity and electrical conductivity suitable for improving lithium-oxygen batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Noble Metal Nanoparticles Decorated Metal Oxide Semiconducting Nanowire Arrays Interwoven into 3D Mesoporous Superstructures for Low-Temperature Gas Sensing

Yuan Ren et al.

Summary: Mesoporous materials have been extensively studied for various applications due to their high specific surface areas and well-interconnected uniform nanopores. Great attention has been paid to synthesizing stable functional mesoporous metal oxides for catalysis, energy storage and conversion, chemical sensing, and so forth.

ACS CENTRAL SCIENCE (2021)

Article Nanoscience & Nanotechnology

Size-Controlled Au Nanoparticles Incorporating Mesoporous ZnO for Sensitive Ethanol Sensing

Mengli Lei et al.

Summary: The mesoporous ZnO-Au composites prepared by photoreduction exhibit superior ethanol sensing performance, attributed to their excellent physical structure and interface effects. Compared to other noble metals, mesoporous ZnO-Au shows higher selectivity and sensitivity to ethanol.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Environmental

Integrated sensing array of the perovskite-type LnFeO3 (Ln=La, Pr, Nd, Sm) to discriminate detection of volatile sulfur compounds

Zhihao Zhang et al.

Summary: The single-phase perovskite-type LnFeO(3) nanoparticles prepared by the citrate sol-gel method exhibit significant differences in gas response to the four typical VSCs, showing good performance, tolerance to environmental changes, and long-term stability for detecting VSCs gas at an operating temperature of 210 degrees C. A new sensor array design integrating a series of LnFeO(3) materials shows excellent recognition ability for various VSCs, promising real-time monitoring capabilities.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Analytical

High selectivity of Ag-doped Fe2O3 hollow nanofibers in H2S detection at room operating temperature

Chengyu Yang et al.

Summary: This paper reported a simple method to synthesize Ag-doped Fe2O3 hollow nanofibers by electrospinning, and studied their application as gas sensors. The results showed that the material exhibited high response, selectivity, and sensitivity to H2S at room temperature, making it a promising sensing material for future applications.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

Synthesis of spindle-like Co-doped LaFeO3 porous microstructure for high performance n-butanol sensor

Jiaqian Gu et al.

Summary: In this study, Co-doped LaFeO3 SPMSs were synthesized and showed significantly improved gas sensing performance towards n-butanol, with lower optimal operating temperature, higher response, better selectivity, lower detection limit, and faster response/recovery speed.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Multidisciplinary

Preparation and formaldehyde sensitive properties of N-GQDs/SnO2 nanocomposite

Zhenlu Chen et al.

CHINESE CHEMICAL LETTERS (2020)

Article Nanoscience & Nanotechnology

Bimetallic PtCu Nanocrystal Sensitization WO3 Hollow Spheres for Highly Efficient 3-Hydroxy-2-butanone Biomarker Detection

Ding Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Materials Science, Ceramics

Recent advances in ABO3 perovskites: their gas-sensing performance as resistive-type gas sensors

Peresi Majura Bulemo et al.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2020)

Article Chemistry, Physical

Highly active and humidity resistive perovskite LaFeO3 based catalysts for efficient ozone decomposition

Shuyan Gong et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Article Chemistry, Analytical

Constructing hierarchical SnO2 nanofiber/nanosheets for efficient formaldehyde detection

Ding Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

Ultrathin WO3 nanosheets modified by g-C3N4 for highly efficient acetone vapor detection

Ding Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Nanoscience & Nanotechnology

Porous ZnO Ultrathin Nanosheets with High Specific Surface Areas and Abundant Oxygen Vacancies for Acetylacetone Gas Sensing

Fengjun Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Tuning ZnO Sensors Reactivity toward Volatile Organic Compounds via Ag Doping and Nanoparticle Functionalization

Vasile Postica et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Hierarchical In2O3@SnO2 Core-Shell Nanofiber for High Efficiency Formaldehyde Detection

Kechuang Wan et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Analytical

Facile fabrication of ZnO/C nanoporous fibers and ZnO hollow spheres for high performance gas sensor

Junfeng Chao et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Nanoscience & Nanotechnology

Enhanced Ethanol Sensing Performance of Au and Cl Comodified LaFeO3 Nanoparticles

Ensi Cao et al.

ACS APPLIED NANO MATERIALS (2019)

Article Chemistry, Physical

rGO/CoTiO3 nanocomposite with enhanced gas sensing performance at low working temperature

Jing Lu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Materials Science, Multidisciplinary

Preparation and characterization of Ba-doped LaFeO3 nanofibers by electrospinning and their ethanol sensing properties

Jun Xiang et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

Article Materials Science, Multidisciplinary

Facile lotus-leaf-templated synthesis and enhanced xylene gas sensing properties of Ag-LaFeO3 nanoparticles

Mingpeng Chen et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Chemistry, Physical

High sensitive and fast formaldehyde gas sensor based on Ag-doped LaFeO3 nanofibers

Wei Wei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Chemistry, Analytical

2D ultrathin Co3O4 nanosheet array deposited on 3D carbon foam for enhanced ethanol gas sensing application

Lei Li et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Review Chemistry, Multidisciplinary

Perovskite/Carbon Composites: Applications in Oxygen Electrocatalysis

Yinlong Zhu et al.

Article Chemistry, Multidisciplinary

Generalized Synthesis of Metal Oxide Nanosheets and Their Application as Li-Ion Battery Anodes

Ayman A. AbdelHamid et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

A Generalized Strategy for the Synthesis of Large-Size Ultrathin Two-Dimensional Metal Oxide Nanosheets

Hewei Zhao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Physical

Synthesis of metal oxide nanosheets through a novel approach for energy applications

Yansong Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Analytical

Synthesis of three-dimensionally ordered macroporous LaFeO3 with enhanced methanol gas sensing properties

Jian Qin et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Nanoscience & Nanotechnology

Honeycomb-like Periodic Porous LaFeO3 Thin Film Chemiresistors with Enhanced Gas-Sensing Performances

Zhengfei Dai et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Analytical

A high sensitivity gas sensor for formaldehyde based on silver doped lanthanum ferrite

Y. M. Zhang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2014)

Review Chemistry, Analytical

Perovskite oxides for semiconductor-based gas sensors

Jeffrey W. Fergus

SENSORS AND ACTUATORS B-CHEMICAL (2007)