☆ 4.7 Article

Effect of Co-Doping on Cu/CaO Catalysts for Selective Furfural Hydrogenation into Furfuryl Alcohol

NANOMATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Catalytic Hydrotreating of Crude Pongamia pinnata Oil to Bio-Hydrogenated Diesel over Sulfided NiMo Catalyst

Yuwadee Plaola et al.

Summary: This study investigated the catalytic activity and stability of Ni-MoS2 supported on different catalyst supports for the deoxygenation of different feedstocks. The results showed that the catalytic performance was influenced by both the purity of the feedstock and the characteristics of the catalyst supports. NiMo/γ-Al2O3 exhibited a high resistance to impure feedstock and excellent stability.

ENERGIES (2022)

添加到收藏夹

Article Chemistry, Applied

Catalytic transfer hydrogenation of furfural to furfuryl alcohol and 2-methylfuran over CuFe catalysts: Ex situ observation of simultaneous structural phase transformation

Munsuree Kalong et al.

Summary: Low-cost CuFe catalysts with different calcination temperatures were synthesized by a facile citric acid complexation method. The catalytic activity was higher for the CuFe600 and CuFe700 catalysts than for the CuFe800 catalyst because calcination at high temperature resulted in the formation of larger catalyst particles. Furthermore, the deactivation rate of the CuFe700 catalyst was slower.

FUEL PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Applied

Synergistic effect for selective hydrodeoxygenation of anisole over Cu-ReOx/SiO2

Xiaofei Wang et al.

Summary: Selective hydrodeoxygenation (HDO) of lignin derived oxygenated aromatic compounds is of great significance for lignin utilization and chemicals production. In this study, bifunctional catalysts of Cu-MOx/SiO2 (M = Re, Mo or W) were prepared to investigate the synergistic effect of Cu and MOx on anisole HDO performance, with the bimetallic catalyst Cu-ReOx/SiO2 showing the highest HDO activity. Cu-MoOx/SiO2 and CuWOx/SiO2, on the other hand, exhibited a preference for transmethylation.

CATALYSIS TODAY (2021)

添加到收藏夹

Article Chemistry, Applied

Cu-Al spinel-oxide catalysts for selective hydrogenation of furfural to furfuryl alcohol

Sutarat Thongratkaew et al.

Summary: The Cu-Al spinel-oxide catalyst CuAl2O4 demonstrates excellent activity in the liquid-phase hydrogenation of furfural to furfuryl alcohol, attributed to the synergistic effect between the reduced copper species and the copper spinel host. Compared to the impregnated catalyst, CuAl2O4 shows positive effects on water impurity tolerance and superiority in H2 dissociation active sites and reaction free energy.

CATALYSIS TODAY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reversing Titanium Oligomer Formation towards High-Efficiency and Green Synthesis of Titanium-Containing Molecular Sieves

Dong Lin et al.

Summary: The green and efficient synthesis of titanium-containing molecular sieves is hindered by environmentally unfriendly additives and complicated procedures. A new additive-free route has been developed using hydroxyl free radicals generated from ultraviolet irradiation, successfully reversing the formation of titanium oligomers to match hydrolysis rates of titanium and silicon species. This approach shows fantastic catalytic performance for propene epoxidation with H-2 and O-2, opening up new opportunities for high-efficiency, environmentally friendly, and facile production of pure titanium-containing molecular sieves compared to conventional hydrothermal methods.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Engineering, Environmental

Mass transfer enhanced CaO pellets for CO2 sorption: Utilization of CO2 emitted from CaCO3 pellets during calcination

Hyung Jin Yoon et al.

Summary: In this study, mass transfer enhanced CaO pellets were prepared by utilizing CO2 evacuation to form channels, which significantly improved the initial stage of CO2 sorption and accelerated the sorption kinetics. The enhanced mass transfer not only increased the CO2 sorption uptake at different temperatures, but also had a positive effect on CO2 release after capture. The fast CO2 sorption and regeneration kinetics of the new pellets significantly enhanced the energy efficiency of continuous CO2 capture processes.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Chemical

Construction of Cu-M-Ox (M = Zn or Al) Interface in Cu Catalysts for Hydrogenation Rearrangement of Furfural

Hongyu Niu et al.

Summary: A series of Cu catalysts with constructed Cu-M-O-x interfaces (M = Zn or Al) have been synthesized in this study. During the reaction, Al2O3 retreating from the Cu-Al-O-x interface caused the replacement of Cu-Al-O-x by new Cu-Zn-O-x interface, which was directly correlated with the irreversibly changed chemical structure and decreased cyclopentanol yield, although the furfural conversion was well sustained.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

添加到收藏夹

Article Chemistry, Physical

Air-Stable and Reusable Cobalt Phosphide Nanoalloy Catalyst for Selective Hydrogenation of Furfural Derivatives

Hiroya Ishikawa et al.

Summary: In this study, a supported cobalt phosphide nanoalloy catalyst was developed for the selective hydrogenation of furfural derivatives, showing high efficiency and air stability without the need for H-2 pretreatment. Backdonation from Co d-electrons to the pi* orbital of furfural derivatives was found to play a key role in the highly efficient hydrogenation process.

ACS CATALYSIS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Selective Hydrogenation of Furfural over the Co-Based Catalyst: A Subtle Synergy with Ni and Zn Dopants

Shangjing Li et al.

Summary: A multimetallic catalyst (NiCoZn@CN) with excellent catalytic performance for hydrogenation of furfural to furfuryl alcohol was prepared through a facile pyrolysis method. The synergy between Co and Ni, Zn dopants greatly promoted the performance of the catalyst. The NiCoZn@CN-600 catalyst showed high selectivity and conversion rates, making it a promising candidate for challenging reactions in the biomass conversion.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aqueous phase catalytic hydrogenation of furfural to furfuryl alcohol over in-situ synthesized Cu-Zn/SiO2 catalysts

Jinxin Zhang et al.

Summary: The study focused on synthesizing Cu-based catalysts supported on SiO2 for the hydrogenation of furfural to furfuryl alcohol, with the in-situ synthesized Cu-Zn/SiO2-IS catalyst showing excellent performance. The addition of Zn species not only improved the reduction of CuO and dispersion of metal Cu, but also effectively prevented decarbonylation, leading to higher selectivity for furfuryl alcohol. The in-situ synthesized catalyst has great potential for industrial applications.

MATERIALS CHEMISTRY AND PHYSICS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of Ni/Malaysian dolomite catalyst synthesis technique on deoxygenation reaction activity of waste cooking oil

R. S. R. M. Hafriz et al.

Summary: The study compared the performance of nickel-doped Malaysian dolomite catalysts synthesized with different techniques on the deoxygenation of waste cooking oil, with the catalyst prepared using the precipitation method showing superior activity and conversion rates.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Agricultural Engineering

Advances in catalytic production of value-added biochemicals and biofuels via furfural platform derived lignocellulosic biomass

Pongtanawat Khemthong et al.

Summary: Hemicellulose in lignocellulosic biomass is an important renewable bioresource for the production of alternative biofuels and biochemicals. Successful utilization of agricultural feedstock biomass to replace petroleum products can support sustainable bio-economy and biorefinery industry worldwide. This review focuses on catalytic processes for converting furfural into value-added biochemicals and biofuels, analyzing research trends based on publications and patents from the past decade.

BIOMASS & BIOENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Hydrogen solubility in bio-based furfural and furfuryl alcohol at elevated temperatures and pressures relevant for hydrodeoxygenation

Gorica Ivanis et al.

Summary: The conversion of biomass into fuels and high-value chemicals requires accurate kinetic models and the study of hydrogen solubility in furfural and furfuryl alcohol. By adjusting the interaction parameters for the two systems based on experimental data and models, low error rates can still be achieved.

FUEL (2021)

添加到收藏夹

Article Energy & Fuels

MOF-derived well-structured bimetallic catalyst for highly selective conversion of furfural

Lei Huang et al.

Summary: The multifunctional catalysts of highly dispersed Co-Ni alloy embedded in porous nitrogen-containing carbon matrix prepared by pyrolysis of MOF template showed promising catalytic performance in the selective conversion of furfural. The introduction of N species influenced the physicochemical properties of the catalyst, improving the catalytic activity in furfural conversion.

FUEL (2021)

添加到收藏夹

Article Chemistry, Applied

Hydrogen-free hydrogenation of furfural to furfuryl alcohol and 2-methyl-furan over Ni and Co-promoted Cu/γ-Al2O3 catalysts

Munsuree Kalong et al.

Summary: This study systematically investigated the catalytic transformation of furfural to furfuryl alcohol and 2-methylfuran without the need for hydrogen supply using bimetallic NiCuAl and CoCuAl catalysts. The bimetallic catalysts showed higher yields and selectivity compared to monometallic CuAl and NiAl catalysts, attributed to the stronger Lewis acidic centers on their surfaces. Additionally, the CoCuAl catalyst exhibited lower catalyst deactivation and carbon deposition under an H-2-free atmosphere.

FUEL PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Hollow Mesoporous Nanoreactors with Encaged PtSn Alloy Nanoparticles for Selective Hydrogenation of Furfural to Furfuryl Alcohol

Tao Xiao et al.

Summary: This study utilized metal ion-bound polymer micelles to synthesize PtSn alloy nanoparticle-encaged hollow mesoporous nanoreactors, which exhibited significantly enhanced catalytic activity and selectivity for hydrogenation of furfural to furfuryl alcohol, achieving a high yield. The improved catalytic performance can be attributed to the confinement effect of active nanoparticles inside hollow cavities, increasing collision rates between reactants and active nanoparticles, as well as the synergistic effect between Pt and Sn.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Effects of TiO2 structure and Co addition as a second metal on Ru-based catalysts supported on TiO2 for selective hydrogenation of furfural to FA

Weerachon Tolek et al.

Summary: The TiO2-supported Ru-based catalysts with different crystallographic compositions exhibited varying catalytic activities and selectivities in the liquid-phase hydrogenation of furfural to furfuryl alcohol. The bimetallic Ru-Co catalysts showed improved performance with increasing Co loading, attributed to the synergistic effect of the Ru-Co alloying system and the enhanced reducibility of Co oxides. The Ru-0.6Co/TiO2 catalyst demonstrated the best performance in the selective hydrogenation of furfural to furfuryl alcohol under the studied conditions.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Energy & Fuels

Synthesis of Furanic Ethers from Furfuryl Alcohol for Biofuel Production

Quan Cao et al.

Summary: Heterogeneous catalysts were used to synthesize FE from furfuryl alcohol, with SiO2-Al2O3 showing high activity. Among the various catalysts, Raney Ni demonstrated the best performance in the hydrogenation of EFE.

ENERGY & FUELS (2021)

添加到收藏夹

Article Engineering, Chemical

Facile Preparation of Oxygen-Vacancy-Mediated Mn3O4 for Catalytic Transfer Hydrogenation of Furfural

Hui Yang et al.

Summary: In this study, an oxygen-vacant Mn3O4 catalyst was prepared by direct calcination method for the catalytic transfer hydrogenation (CTH) of FF to FA, achieving high yield of FA. The oxygen vacancy-mediated Mn3O4 showed good performance and reusability.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

添加到收藏夹

Article Chemistry, Analytical

Syngas production with low tar content from cellulose pyrolysis in molten salt combined with

Sakhon Ratchahat et al.

Summary: The research on syngas production from cellulose pyrolysis showed that combining carbonate salts with alumina-supported nickel catalyst can significantly reduce tar content, increase gas yield, and decrease CO2 formation. However, catalyst deactivation due to corrosiveness of molten salt is a serious issue that needs to be addressed to maintain catalyst performance.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

添加到收藏夹

Article Chemistry, Physical

Zeolite-Encapsulated Cu Nanoparticles for the Selective Hydrogenation of Furfural to Furfuryl Alcohol

Peng Cao et al.

Summary: The study successfully prepared well-defined Cu nanoparticles encapsulated within titanium silicalite-1 (TS-1) by an in situ encapsulation approach, showing enhanced activity and selectivity for the selective hydrogenation of furfural to furfuryl alcohol. The Na-Cu@TS-1 catalyst exhibited high turnover frequency value and effective suppression of metal aggregation and leaching during catalysis due to the confined environment of the zeolite and electronic interaction between encapsulated Cu nanoparticles and Ti species. Na species in the catalyst not only modulate the acid/base property of the zeolite and suppress side reactions, but also facilitate the FFL hydrogenation by inducing an electronic-rich state in the encapsulated Cu species.

ACS CATALYSIS (2021)

添加到收藏夹

Article Chemistry, Physical

MOF derived non-noble metal catalysts to control the distribution of furfural selective hydrogenation products

Zhuo-Fei Li et al.

Summary: This study efficiently prepared a ZnCo bimetal ZIF composite with higher catalytic performance through ultrasonic-assisted method, and found that the presence or absence of Zn in the catalyst could regulate the hydrogenation products of furfural.

MOLECULAR CATALYSIS (2021)

添加到收藏夹

Article Engineering, Environmental

Immobilized highly dispersed Ni nanoparticles over porous carbon as an efficient catalyst for selective hydrogenation of furfural and levulinic acid

Putrakumar Balla et al.

Summary: The study focused on the development of an inexpensive and eco-friendly Ni@C catalyst for selective hydrogenation of biomass-based platform molecules, achieving high activity and selectivity in multi-catalyzed hydrogenation reactions. The Ni nanoparticles with small and ultra-fine sizes were highly dispersed over the carbon matrix, providing durability and reusability in the studied reaction cycles.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Environmental

Effect of carboxylate stabilizers on the performance of Pt/C catalysts for furfural hydrogenation

Mi Yeon Byun et al.

Summary: The study highlights the importance of stabilizers in the preparation and performance of Pt/C catalysts. The dispersion of Pt/C catalysts is influenced by the type and carbon chain length of stabilizers. In the furfural hydrogenation reaction, catalysts with higher Pt dispersion exhibit higher reactivity and selectivity.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Engineering Bimetallic Centers in Porous Metal Silicate Materials for Hydrogenation of Furfural at Lower Temperature

Jiahui Ye et al.

Summary: Discrete metal-organic molecules are utilized as templates for in situ encapsulation of redox-active metal sites in porous silicate materials. The synthesis of porous metal silicate (PMS) material (PMS-2) using Cu/Co-benzoate coordination complex as the template allows for systematic control of pore distribution, particle size, and redox metallic site. The resulting PMS-2 demonstrates high catalytic activity due to synergistic work between Cu and Co metal sites and unique structural properties.

ACS MATERIALS LETTERS (2021)

添加到收藏夹

Article Engineering, Environmental

From biomass to diesel additives: Hydrogenation of cyclopentanone-furfural aldol condensation adducts

Jennifer Cueto et al.

Summary: This study focused on the hydrogenation of furfural-cyclopentanone with Pd/Al2O3, which showed a synergistic effect and improved reaction selectivity. The best results were obtained with hexane and butanol as organic solvents, providing a yield of over 75% of fully hydrogenated molecules in less than two hours at optimal conditions.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Environmental

Gas phase hydrogenation of furfural to obtain valuable products using commercial Cr-free catalysts as an environmentally sustainable alternative to copper chromite

C. P. Jimenez-Gomez et al.

Summary: Two commercial Cu-based catalysts without Cr, R120 and W220, were evaluated for furfural hydrogenation, showing that R120 catalyst achieved the best catalytic performance and stability, with high potential to replace copper chromite as demonstrated in the 24-hour stability test.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Selective hydrogenolysis of furfural into fuel-additive 2-methylfuran over a rhenium-promoted copper catalyst

Jirawat Chuseang et al.

Summary: The study investigated the effect of Re promoter on Cu/gamma-Al2O3 catalysts with different Cu: Re molar ratios, revealing that the combination of Re and Cu made the reduction behavior of Cu species difficult, while the acidity of the catalyst increased with higher Re loading. The optimal Cu1Re0.14 catalyst showed the highest 2-methylfuran yield in the hydrogenolysis of furfural, demonstrating faster production rates and stable activity over four consecutive experiments, indicating a synergistic effect between Cu and Re species in promoting the hydrogenolysis reaction.

SUSTAINABLE ENERGY & FUELS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

One-pot self-assembly synthesis of Ni-doped ordered mesoporous carbon for quantitative hydrogenation of furfural to furfuryl alcohol

Yiwei Tang et al.

Summary: The study prepared Ni-doped ordered mesoporous carbon using a one-pot method, which showed excellent stability and recyclability in catalyzing the conversion of biomass-derived substances. The results have significant implications for the green synthesis of metal-doped OMC materials.

GREEN CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Efficient single-atom Ni for catalytic transfer hydrogenation of furfural to furfuryl alcohol

Yafei Fan et al.

Summary: A Ni single-atom catalyst supported on nitrogen-doped carbon was synthesized and utilized for catalytic transfer hydrogenation of furfural to furfuryl alcohol, exhibiting high performance with exceptional TOF and selectivity. The catalyst also showed superior stability and catalytic activity for other unsaturated aldehydes, suggesting potential applications in sustainable technologies.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Incorporation of Active Metal Species in Crystalline Porous Materials for Highly Efficient Synergetic Catalysis

Wen-Gang Cui et al.

Summary: The design and development of efficient catalytic materials with synergistic catalytic sites, such as crystalline porous materials (CPMs), have been a focus of recent research due to their essential role in enhancing catalytic activity and selectivity. By incorporating guest species in CPMs, synergistic effects can be achieved between different components, leading to improved performance in catalytic processes.

SMALL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance CoCu Catalyst Encapsulated in KIT-6 for Higher Alcohol Synthesis from Syngas

Zhuoshi Li et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

添加到收藏夹

Article Engineering, Environmental

Mg-promoted Ni-CaO microsphere as bi-functional catalyst for hydrogen production from sorption-enhanced steam reforming of glycerol

Chengxiong Dang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modulated Sn Oxidation States over a Cu2O-Derived Substrate for Selective Electrochemical CO2 Reduction

Mengran Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Engineering, Chemical

Influence of Sn on Stability and Selectivity of Pt-Sn@UiO-66-NH2 in Furfural Hydrogenation

Biying Zhang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solvent-Free Hydrodeoxygenation of Triglycerides to Diesel-like Hydrocarbons over Pt-Decorated MoO2 Catalysts

Sisira Fangkoch et al.

ACS OMEGA (2020)

添加到收藏夹

Article Energy & Fuels

Selective Hydrogenation of 5-Hydroxymethylfurfural into 2,5-Bis(hydroxymethyl)furan over a Cheap Carbon-Nanosheets-Supported Zr/Ca Bimetallic Catalyst

Junhua Zhang et al.

ENERGY & FUELS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Synthesis of Cu Nanoparticles on Carbon for Highly Selective Hydrogenation of Furfural to Furfuryl Alcohol by Using Pomelo Peel as the Carbon Source

Chenguang Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

添加到收藏夹

Article Engineering, Chemical

Copper-dolomite as effective catalyst for glycerol hydrogenolysis to 1,2-propanediol

Norsahida Azri et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

添加到收藏夹

Article Energy & Fuels

Bimetallic CoCu catalyst derived from in-situ grown Cu-ZIF-67 encapsulated inside KIT-6 for higher alcohol synthesis from syngas

Zhuoshi Li et al.

FUEL (2020)

添加到收藏夹

Article Chemistry, Physical

Bifunctional rhenium-copper nanostructures for intensified and stable ethanol synthesis via hydrogenation of dimethyl oxalate

Zhongnan Du et al.

CATALYSIS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Mesoporous mixed CuCo oxides as robust catalysts for liquid-phase furfural hydrogenation

Chinh Nguyen-Huy et al.

APPLIED CATALYSIS A-GENERAL (2019)

添加到收藏夹

Article Chemistry, Physical

Dual functional catalytic materials of Ni over Ce-modified CaO sorbents for integrated CO2 capture and conversion

Hongman Sun et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

添加到收藏夹

Article Chemistry, Physical

Mechanistic insights into the catalytic transfer hydrogenation of furfural with methanol and alkaline earth oxides

Maria S. Gyngazova et al.

JOURNAL OF CATALYSIS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Spectroscopy Identification of the Bimetallic Surface of Metal-Organic Framework-Confined Pt-Sn Nanoclusters with Enhanced Chemoselectivity in Furfural Hydrogenation

Tian Wei Goh et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Cobalt-Based Catalyst Supported on Different Morphologies of Alumina for Non-oxidative Propane Dehydrogenation: Effect of Metal Support Interaction and Lewis Acidic Sites

Nikita Dewangan et al.

CHEMCATCHEM (2019)

添加到收藏夹

Article Chemistry, Physical

Selective hydrogenation of quinolines over a CoCu bimetallic catalyst at low temperature

Zhen-Hong He et al.

MOLECULAR CATALYSIS (2019)

添加到收藏夹

Article Chemistry, Physical

Structure-dependent catalytic properties of mesoporous cobalt oxides in furfural hydrogenation

Chinh Nguyen-Huy et al.

APPLIED CATALYSIS A-GENERAL (2019)

添加到收藏夹

Article Chemistry, Physical

Cooperation of Ni and CaO at Interface for CO2 Reforming of CH4: A Combined Theoretical and Experimental Study

Ping Wu et al.

ACS CATALYSIS (2019)

添加到收藏夹

Article Chemistry, Physical

Higher alcohol synthesis from syngas over xerogel-derived Co-Cu-Al2O3 catalyst with an enhanced metal proximity

Seung Ju Han et al.

MOLECULAR CATALYSIS (2019)

添加到收藏夹

Article Energy & Fuels

Improving Adsorptive Performance of CaO for High-Temperature CO2 Capture through Fe and Ga Doping

Ahmed Al-Mamoori et al.

ENERGY & FUELS (2019)

添加到收藏夹

Article Chemistry, Applied

Direct conversion of CO2 to long-chain hydrocarbon fuels over K-promoted CoCu/TiO2 catalysts

Zhibiao Shi et al.

CATALYSIS TODAY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Catalytic cascade conversion of furfural to 1,4-pentanediol in a single reactor

Fei Liu et al.

GREEN CHEMISTRY (2018)

添加到收藏夹

Article Engineering, Chemical

Selective Hydrogenation of Furfural to Furfuryl Alcohol over Acid Activated Attapulgite-Supported NiCoB Amorphous Alloy Catalyst

Haijun Guo et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Optimization of the structural characteristics of CaO and its effective stabilization yield high-capacity CO2 sorbents

Muhammad Awais Naeem et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

How Catalysts and Experimental Conditions Determine the Selective Hydroconversion of Furfural and 5-Hydroxymethylfurfural

Shuo Chen et al.

CHEMICAL REVIEWS (2018)

添加到收藏夹

Article Chemistry, Applied

Selective hydrogenolysis of furfuryl alcohol to 1,5-and 1,2-pentanediol over Cu-LaCoO3 catalysts with balanced Cu-0-CoO sites

Fangfang Gao et al.

CHINESE JOURNAL OF CATALYSIS (2018)

添加到收藏夹

Article Engineering, Chemical

Nanoporous Cu-Al-Co Alloys for Selective Furfural Hydrodeoxygenation to 2-Methylfuran

Gregory S. Hutchings et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

High efficiency and stability of Au-Cu/hydroxyapatite catalyst for the oxidation of carbon monoxide

Jiuli Guo et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Conversion of Furfural to 1,5-Pentanediol: Process Synthesis and Analysis

Kefeng Huang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

添加到收藏夹

Article Chemistry, Physical

Metal-organic frameworks derived bimetallic Cu-Co catalyst for efficient and selective hydrogenation of biomass-derived furfural to furfuryl alcohol

Yuan Wang et al.

MOLECULAR CATALYSIS (2017)

添加到收藏夹

Article Chemistry, Physical

High efficient conversion of furfural to 2-methylfuran over Ni-Cu/Al2O3 catalyst with formic acid as a hydrogen donor

Zhaolin Fu et al.

APPLIED CATALYSIS A-GENERAL (2017)

添加到收藏夹

Article Chemistry, Applied

Studies on Ni-M (M = Cu, Ag, Au) bimetallic catalysts for selective hydrogenation of cinnamaldehyde

Murthiyamma Gengatharan Prakash et al.

CATALYSIS TODAY (2016)

添加到收藏夹

Article Energy & Fuels

Effect of Cu addition as a promoter on Re/SiO2 catalysts in the hydrodeoxygenation of 2-methoxyphenol as a model bio oil compound

N. Martinez et al.

FUEL (2016)

添加到收藏夹

Article Chemistry, Physical

Higher alcohols synthesis from syngas over CoCu/SiO2 catalysts: Dynamic structure and the role of Cu

Junjie Su et al.

JOURNAL OF CATALYSIS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Highly selective hydrogenation of furfural to furfuryl alcohol over Pt nanoparticles supported on g-C3N4 nanosheets catalysts in water

Xiufang Chen et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

A versatile bi-metallic copper-cobalt catalyst for liquid phase hydrogenation of furfural to 2-methylfuran

Sanjay Srivastava et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Core-shell Cu@(CuCo-alloy)/Al2O3 catalysts for the synthesis of higher alcohols from syngas

Wa Gao et al.

GREEN CHEMISTRY (2015)

添加到收藏夹

Article Chemistry, Physical

Catalytic behaviors of Ni/γ-Al2O3 and Co/γ-Al2O3 during the hydrodeoxygenation of palm oil

Atthapon Srifa et al.

CATALYSIS SCIENCE & TECHNOLOGY (2015)

添加到收藏夹

Article Chemistry, Applied

The enhanced activity of Ca/MgAl mixed oxide for transesterification

Cinthia S. Castro et al.

FUEL PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

One-pot selective conversion of furfural into 1,5-pentanediol over a Pd-added Ir-ReOx/SiO2 bifunctional catalyst

Sibao Liu et al.

GREEN CHEMISTRY (2014)

添加到收藏夹

Article Chemistry, Physical

Porous CuO nanowires as the anode of rechargeable Na-ion batteries

Lijiang Wang et al.

NANO RESEARCH (2014)

添加到收藏夹

Article Engineering, Environmental

Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sand

Miguel Angelo Mastella et al.

WASTE MANAGEMENT (2014)

添加到收藏夹

Article Chemistry, Physical

Structure and catalytic performance of alumina-supported copper-cobalt catalysts for carbon monoxide hydrogenation

Jingjuan Wang et al.

JOURNAL OF CATALYSIS (2012)

添加到收藏夹

Article Chemistry, Physical

Selective conversion of furfural to methylfuran over silica-supported Ni-Fe bimetallic catalysts

Surapas Sitthisa et al.

JOURNAL OF CATALYSIS (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.