☆ 4.5 Article

Effect of Grain Size on Mechanical and Creep Rupture Properties of 253 MA Austenitic Stainless Steel

METALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

Investigation of carbide precipitations on microstructure and hardness of medium carbon Cr-Ni austenite stainless hardfacing deposit with high wear resistance properties

Dok Su Paek et al.

Summary: This study enhances the wear resistance of medium carbon Cr-Ni austenite stainless steel by using shielded metal arc welding. The precipitation of carbides formed by Cr, Mo, and V in the austenite matrix and at the grain boundaries contributes to the high surface hardness (HB 300-500) of the deposited hardfacing metals, resulting in improved wear resistance.

WELDING IN THE WORLD (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recrystallization and Grain Growth of AISI 904L Super-Austenitic Stainless Steel: A Multivariate Regression Approach

Giulia Stornelli et al.

Summary: This paper investigates the evolution of microstructure and hardness values in AISI 904L stainless steel after cold rolling and subsequent annealing, aiming to optimize the thermomechanical treatment conditions and improve production efficiency. The results show that for lower treatment temperatures, partial recrystallization occurs, while for higher temperatures, full recrystallization can be achieved in a short time. Grain growth behavior is independent of the reduction ratio and shows a linear trend with soaking time. The statistical analysis reveals that temperature and soaking time have more significant effects on hardness values compared to the reduction ratio.

METALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Prediction of creep ductility for austenitic stainless steels and copper

Rolf Sandstrom et al.

Summary: This paper presents basic modeling results for the creep ductility of austenitic stainless steels using fundamental models and equations. It also introduces new results for ductile rupture and proposes a method to predict ductility during ductile rupture based on necking behavior.

MATERIALS AT HIGH TEMPERATURES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of applied stress and grain size on creep-rupture lifetime prediction for Haynes 282 alloy

Michael L. Santella et al.

Summary: The study used multiple data sets from a single laboratory to analyze the creep lifetime prediction of aged Haynes 282 alloy, showing the need to consider two different modes under different temperature and stress conditions for more accurate predictions. Additionally, the difference in grain size has an impact on the predictive ability of creep lifetime.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Construction & Building Technology

Enhancing yield strength of high nitrogen austenitic stainless steel

Yong Wang et al.

Summary: This study successfully increased the yield strength of 18Mn18Cr0.6 N steel through cold rolling and annealing, and found the importance of dispersed fine globular Cr2N precipitates for strengthening effect.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and stress rupture properties of A286 superalloy in the 600 to 750 °C temperature range

Li Wei et al.

Summary: This study investigated the stress rupture properties of A286 alloy in high temperature service environment through stress rupture tests and microstructure observation. Various deformation mechanisms and fracture modes were identified at different temperatures and stress levels, providing insights into the material behavior under such conditions.

MATERIALS RESEARCH EXPRESS (2021)

添加到收藏夹

Article Chemistry, Physical

A general mechanism of grain growth -I. Theory

Jianfeng Hu et al.

Summary: A new migration model of grain boundary is proposed, and a mathematical expression is derived to depict the general evolution of grain growth in cellular structures. The model reveals how the normal, abnormal, and stagnant behaviors of grain growth occur in polycrystalline systems. Quantitative correlation between GB roughening transition and grain growth behavior is established.

JOURNAL OF MATERIOMICS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Creep rupture mechanisms and life prediction of IN617 for VHTR applications

Yue Wang et al.

Summary: The study systematically investigated the creep rupture mechanisms of IN617 by establishing the relationship between microstructural characteristics and creep performance. Different rupture mechanisms were identified under various conditions, such as sliding and migration of recrystallized grain boundaries, creep voids along the grain boundaries, and microstructural degradation and internal oxidization, which ultimately accelerated creep rupture.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of Prior Austenite Grain Size on the Annealing Twin Density and Hardness in Austenitic Stainless Steel

Mochammad Syaiful Anwar et al.

Summary: This study investigated the effect of prior austenite grain size on twin density and hardness of austenitic stainless steels. The results showed that 253 MA ASS had a lower SFE and K value than 316L ASS, resulting in a higher twin density and hardness. The Sellars, Pande, and Hall-Petch models were able to predict austenite grain sizes, twin density, and hardness in the tested steels.

INTERNATIONAL JOURNAL OF TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Understanding the Stress Rupture Behavior and Microstructural Changes in Austenitic Stainless Steel SS321

M. Manokaran et al.

Summary: The Ti-stabilized austenitic stainless steel SS321 underwent stress rupture tests, showing shorter creep life at high temperatures and stresses, while the creep life increased at lower temperatures and stresses. This phenomenon may be related to the microstructure of the material and grain boundary sliding phenomenon.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Optics

Effects of laser shock processing and shot peening on 253 MA austenitic stainless steel and their consequences on fatigue properties

L. Spadaro et al.

OPTICS AND LASER TECHNOLOGY (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Processing and Properties of Reversion-Treated Austenitic Stainless Steels

Antti Jarvenpaa et al.

METALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel

Petr Kral et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Austenite Grain Growth Behaviors of La-Microalloyed H13 Steel and Its Effect on Mechanical Properties

Wenjian Zhou et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Precipitation behavior of sigma phase and its influence on mechanical properties of a Ni-Fe based alloy

Changshuai Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Grain Size on Mechanical Properties and Work-Hardening Behavior of AISI 304 Austenitic Stainless Steel

Meysam Naghizadeh et al.

STEEL RESEARCH INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain Size Effect on the Mechanical Behavior of Metastable Fe-23Cr-8.5Ni Alloy

Lin Xie et al.

METALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Achieving superior strength and high ductility in AISI 304 austenitic stainless steel via asymmetric cold rolling

Ali Amininejad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanism of huge Luders-type deformation in ultrafine grained austenitic stainless steel

Si Gao et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of Heat Treatment on Microstructure and Stress Rupture Properties of a Ni-Mo-Cr-Fe Base Corrosion-Resistant Superalloy

Tao Liu et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of grain refinement on strain hardening and fracture in austenitic stainless steel

D. M. Xu et al.

MATERIALS SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep Fracture Mechanisms and Maps in Aisi Type 316 Austenitic Stainless Steels from Distinct Origins

Sergio Neves Monteiro et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure-sensitive modelling of dislocation creep in polycrystalline FCC alloys: Orowan theory revisited

E. I. Galindo-Nava et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flow softening of 253 MA austenitic stainless steel during hot compression at higher strain rates

Jingqi Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Nitrogen Content on Grain Refinement and Mechanical Properties of a Reversion-Treated Ni-Free 18Cr-12Mn Austenitic Stainless Steel

P. Behjati et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Fine Grained Austenitic Stainless Steels: The Role of Strain Induced alpha ' Martensite and the Reversion Mechanism Limitations

Angeline Poulon-Quintin et al.

ISIJ INTERNATIONAL (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of microstructures on the creep-rupture properties and fracture mechanisms in austenitic heat-resistant steels

M Tanaka et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of grain size on creep properties of type 316LN stainless steel

YS Lee et al.

METALS AND MATERIALS-KOREA (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain size dependence of creep-rupture properties and fracture mechanism in austenitic SUS304 steel at 973 K

M Tanaka et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.