4.6 Article

Self-assembled, highly-lithiophilic and well-aligned biomass engineered MXene paper enables dendrite-free lithium metal anode in carbonate-based electrolyte

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Applied

Polar interaction of polymer host-solvent enables stable solid electrolyte interphase in composite lithium metal anodes

Peng Shi et al.

Summary: The study proposes a strategy of utilizing the interaction between a polar polymer host and solvent molecules to achieve a stable SEI and uniform Li deposition in a working battery. The composite Li anode with a PAN host demonstrates improved cycling performance and provides new guidance for designing practical composite Li anodes.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Chemistry, Applied

Dendrite-free lithium anode achieved under lean-electrolyte condition through the modification of separators with F-functionalized Ti3C2 nanosheets

Qiang Zhang et al.

Summary: The study focuses on addressing the challenges posed by an unstable solid electrolyte interphase (SEI) and chaotic lithium ion flux in lithium batteries. By coating fluorine-functionalized Ti3C2 nanosheets on PP separators, the homogenization of lithium ion flux and the generation of stable SEI layers on lithium anodes were achieved. This approach not only provides abundant ion pathways for manipulating lithium ion flux but also increases the Young's modulus and electrolyte wettability of the separators, leading to improved electrochemical performance in various cell configurations.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Chemistry, Physical

Fabrication of Fe nanocomplex pillared few-layered Ti3C2Tx MXene with enhanced rate performance for lithium-ion batteries

Pengfei Huang et al.

Summary: The paper presents a method to enhance the rate performance and structural stability of Ti3C2Tx MXene by fabricating Fe nanocomplex pillared few-layered Ti3C2Tx (FPTC) heterostructures. The few-layered Ti3C2 MXene prepared using NH4+ ions method serves as a conductive substrate for rapid transport of Li+ ions and electrons, resulting in improved charge transfer kinetics and excellent rate performance of FPTC composites.

NANO RESEARCH (2021)

Article Multidisciplinary Sciences

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Dan Luo et al.

Summary: A stable multifunctional solid electrolyte interface (SEI) can be constructed by employing electrolyte additives containing catechol and acrylic groups via in-situ anionic polymerization, leading to uniform Li deposition and dendrite-free anode in lithium metal batteries. This strategy offers remarkable cycling performance with high current density, ultra-long cycle life, high cumulative capacity, and stable cycling under high temperature conditions.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Elevated Lithium Ion Regulation by a Natural Silk Modified Separator for High-Performance Lithium Metal Anode

Xiang Li et al.

Summary: This research developed a functional modification layer from a derivant of natural silk to protect the lithium anode, offering abundant functional group sites for efficient uniform Li-ion flux and in situ formation of a Li3N-rich solid electrolyte interphase film. The high-performance lithium metal anode achieved dendrite-free morphology and significantly enhanced cycle stability, showing long-term cycling stability of 3000 cycles when paired with LiFePO4 cathodes and over 400 cycles with sulfur cathodes. This study provides a facile and practical approach for interface modification of the high-performance lithium anode and explores the application of biomass-based materials in advanced batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Design of Robust, Lithiophilic, and Flexible Inorganic-Polymer Protective Layer by Separator Engineering Enables Dendrite-Free Lithium Metal Batteries with LiNi0.8Mn0.1Co0.1O2 Cathode

Liwen Tan et al.

Summary: The development of a protective layer composed of lithiated SiO and polyacrylate acid on the Li metal anode enables dendrite-free Li deposition, leading to enhanced cycling stability and coulombic efficiency in Li||Li and Cu||Li cells. This technology also significantly extends the lifespan of full cells with a composite separator in carbonate-based electrolytes.
Article Chemistry, Physical

Creating New Battery Configuration Associated with the Functions of Primary and Rechargeable Lithium Metal Batteries

Hao Chen et al.

Summary: A new rechargeable three-electrode battery configuration has been developed, involving lithium, fluorinated graphite, and sulfur electrodes, which can transform the initial middle-fluorinated graphite cathode into a hybrid lithium anode. This rechargeable battery shows low overpotential, long cycle life, and high energy density based on the total mass of the three-electrode materials, with the excess lithium in the system being replenished in situ to further extend the lifespan.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Physical

Tortuosity Modulation toward High-Energy and High-Power Lithium Metal Batteries

Yongzheng Shi et al.

Summary: This article reveals the correlation between the electrochemical kinetics and tortuosity of LMBs, discusses the importance of low-tortuous structures for improving high-power LMBs, and summarizes material design strategies to regulate lithium-ion flux, electric field, and lithium nucleation.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Highly-lithiophilic Ag@PDA-GO film to Suppress Dendrite Formation on Cu Substrate in Anode-free Lithium Metal Batteries

Zewdu Tadesse Wondimkun et al.

Summary: By coating lithiophilic Ag@PDA and artificial SEI graphene oxide (GO) on the Cu current collector, a more uniform lithium deposition, lower nucleation overpotential, and higher Coulombic efficiency can be achieved. The modified electrodes show enhanced performance in inhibiting lithium dendrite growth and electrolyte decomposition in anode free lithium metal batteries.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Multidisciplinary

Lithiophilic MXene-Guided Lithium Metal Nucleation and Growth Behavior

Son Ha et al.

Summary: The study investigates the effect of a lithiophilic surface on lithium metal nucleation and growth behaviors using a Ti3C2Tx MXene substrate, resulting in the formation of uniformly dispersed lithium nanoparticles and leading to high reversible cycling performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

The Electrostatic Attraction and Catalytic Effect Enabled by Ionic-Covalent Organic Nanosheets on MXene for Separator Modification of Lithium-Sulfur Batteries

Pengyue Li et al.

Summary: This study proposes a new strategy to regulate the redox kinetics and shuttle effect of polysulfides by modifying a polypropylene separator with a coating layer of guanidinium-based ionic-covalent organic nanosheets (iCON) on the surface of Ti3C2. The synergistic effects of Ti3C2 and iCON effectively suppress the shuttle effect of polysulfides and accelerate the redox reactions of sulfur species, resulting in high-performance lithium-sulfur batteries.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

A dynamic stability design strategy for lithium metal solid state batteries

Luhan Ye et al.

Summary: A multi-layered electrolyte design can inhibit the growth of lithium dendrites in solid-state lithium metal batteries, improving their performance. However, practical challenges remain in realizing a lithium metal anode for batteries.

NATURE (2021)

Article Energy & Fuels

Free-standing ultrathin lithium metal-graphene oxide host foils with controllable thickness for lithium batteries

Hao Chen et al.

Summary: An ultrathin, free-standing, mechanically robust Li metal foil has been developed, which improves the initial Coulombic efficiency, increases full cell capacity, and prolongs the cycle life of Li metal full cells.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

A Powerful One-Step Puffing Carbonization Method for Construction of Versatile Carbon Composites with High-Efficiency Energy Storage

Shenghui Shen et al.

Summary: Carbon materials play a critical role in electrochemical energy storage and conversion, and the challenge lies in fabricating versatile carbon-based composites with controlled morphology and adjustable composition. A one-step maltose-based puffing carbonization technology is reported in this work to construct multiscale carbon composites, showing advantages such as large porosity, high conductivity, and tunable components. The research offers a general way for constructing multifunctional carbon composites for advanced energy storage and conversion, demonstrated through various composite examples.

ADVANCED MATERIALS (2021)

Review Chemistry, Physical

A Brief Review on Solid Electrolyte Interphase Composition Characterization Technology for Lithium Metal Batteries: Challenges and Perspectives

Xinyi Shan et al.

Summary: Lithium metal batteries (LMB) are considered as the most promising high-energy-density energy storage devices, but their commercial applications are hindered by poor cycling stability and safety concerns. Solid electrolyte interphase (SEI) plays a dominant role in regulating Li deposition and overall performance of LMBs, but its composition and evolution are still elusive. Advanced characterization methods and monitoring techniques are urgently needed to address these issues. This perspective introduces the development history of SEI research, formation mechanisms, advanced technologies for SEI characterization and monitoring, and proposes future investigation directions.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Article Chemistry, Applied

Structurally tunable characteristics of ionic liquids for optimizing lithium plating/stripping via electrolyte engineering

Shihan Qi et al.

Summary: Electrolyte chemistry plays a crucial role in regulating the solid electrolyte interphase (SEI) and Li+ solvation for safe lithium metal batteries (LMBs), with imidazole-based ionic liquids (ILs) as electrolyte additives showing promising potential in enhancing battery performance. The structured tunable characteristics of ILs contribute to the efficient formation of SEI, regulation of Li+ solvation sheath structure, and suppression of further Li plating, leading to improved electrochemical performance and stable battery life.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Sowing Silver Seeds within Patterned Ditches for Dendrite-Free Lithium Metal Batteries

Hua Wang et al.

Summary: The Li anode with silver nanowires sowed in patterned ditches shows improved stability and cycling performance, with excellent cyclability achieved under specific current and capacity conditions. Pairing this anode with specific cathodes also demonstrates long cycle life and minimal gas generation in full cells over extended cycling, showcasing the effectiveness of the authors' strategy for LMBs.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Induction of planar Li growth with designed interphases for dendrite-free Li metal anodes

Xiang Han et al.

Summary: In this study, a separator modified by two-dimensional MXene and solid-state electrolyte LAGP was designed to induce planar lithium plating and suppress dendritic lithium formation in high-energy-density lithium batteries. The novel strategy of regulating lithium deposition and engineering solid electrolyte interphases improves the cycling performance of the battery and can be applied to other alkali metal anodes.

ENERGY STORAGE MATERIALS (2021)

Review Chemistry, Multidisciplinary

Biomass-based materials for green lithium secondary batteries

Chengbin Jin et al.

Summary: The advances in process engineering, nanotechnology, and materials science have made it possible for biomass to be used in novel energy storage technologies like lithium secondary batteries (LSBs). Biomass-derived materials can be sustainable battery components, contributing to green battery systems. This review provides a comprehensive overview of the fabrication and application of biomass and biomass-derived materials in LSBs, emphasizing the potential for high-performance green battery systems.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Materials Science, Multidisciplinary

Atomic Layer Deposition of High-Capacity Anodes for Next-Generation Lithium-Ion Batteries and Beyond

Yanqiang Cao et al.

Summary: Electrification has significant impacts on modern society, but state-of-the-art lithium-ion batteries are not sufficient for future transportation. High-capacity anodes like silicon, SnO2, and lithium metal are under investigation but face challenges such as volume changes. Strategies like atomic layer deposition (ALD) are being explored to address these issues.

ENERGY & ENVIRONMENTAL MATERIALS (2021)

Article Engineering, Environmental

MXene/chitosan nanocoating for flexible polyurethane foam towards remarkable fire hazards reductions

Bo Lin et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Chemistry, Applied

Perspective on the critical role of interface for advanced batteries

Chong Yan et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Article Chemistry, Multidisciplinary

Draining Over Blocking: Nano-Composite Janus Separators for Mitigating Internal Shorting of Lithium Batteries

Matthew S. Gonzalez et al.

ADVANCED MATERIALS (2020)

Article Nanoscience & Nanotechnology

Enhanced Ionic Accessibility of Flexible MXene Electrodes Produced by Natural Sedimentation

Ning Sun et al.

NANO-MICRO LETTERS (2020)

Article Chemistry, Multidisciplinary

Organosulfur Compounds Enable Uniform Lithium Plating and Long-Term Battery Cycling Stability

Bismark Boateng et al.

NANO LETTERS (2020)

Article Chemistry, Physical

High energy density lithium metal batteries enabled by a porous graphene/MgF2 framework

Qingshuai Xu et al.

ENERGY STORAGE MATERIALS (2020)

Review Chemistry, Physical

Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries

Ghulam Yasin et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Demulsification of acidic oil-in-water emulsions driven by chitosan loaded Ti3C2Tx

Yingchao Du et al.

APPLIED SURFACE SCIENCE (2019)

Article Chemistry, Multidisciplinary

Bulk Nanostructured Materials Design for Fracture-Resistant Lithium Metal Anodes

Shan Liu et al.

ADVANCED MATERIALS (2019)

Article Engineering, Chemical

Two-dimensional MXene incorporated chitosan mixed-matrix membranes for efficient solvent dehydration

Zhi Xu et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Article Chemistry, Multidisciplinary

Lithiophilic Sites in Doped Graphene Guide Uniform Lithium Nucleation for Dendrite-Free Lithium Metal Anodes

Rui Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Multidisciplinary

A Two-Dimensional Lamellar Membrane: MXene Nanosheet Stacks

Li Ding et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Multidisciplinary Sciences

Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating

Zheng Liang et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Chemistry, Multidisciplinary

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes

Zheng Liang et al.

NANO LETTERS (2015)

Article Chemistry, Physical

Adsorption of phosphorylated chitosan on mineral surfaces

Kaipeng Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)