☆ 4.4 Article

Investigation of Structural and Thermal Properties of Graphene Oxide Reinforced Epoxy Nanocomposites

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Silver nanoparticles/polyvinyl alcohol film: studies of thermal characterization, AFM and corrosion protection by electrodeposition on 304L stainless steel

Adriana Samide et al.

Summary: The thermal behavior and degradation characteristics of a composite polymeric system consisting of silver nanoparticles and polyvinyl alcohol were studied, showing differences in decomposition at high temperatures. This composite material was used as a protective coating against corrosion of stainless steel, demonstrating good electrochemical stability and corrosion protection performance. Characterization techniques such as atomic force microscopy and electrochemical impedance spectroscopy confirmed the formation of a uniform and smooth composite film on the stainless steel surface, ensuring a high level of corrosion protection.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Article Chemistry, Physical

Fabrication of low friction and wear carbon/epoxy nanocomposites using the confinement and self-lubricating function of carbon nanocage fillers

Yongfeng Bu et al.

Summary: A new filler of carbon nanocages (CNC) prepared by the method of MgO templates was reported to improve dry friction performance of epoxy resin. The optimized CNC/EP nanocomposites showed a significant reduction in friction coefficient and wear rate compared to neat epoxy. The unique structure of CNC enables the enhancement of mechanical properties, protecting the epoxy matrix and improving dry friction performance.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Composites

New insights into interface interactions of CNT-reinforced epoxy nanocomposites

Ke Duan et al.

Summary: Through molecular dynamics simulation, it was found that there are two different types of interfaces, weak and strong, between carbon nanotubes and epoxy matrices. The load transfer capability at the weak interface is very low, while the strong pull-out interface exhibits higher strength. Additionally, the interfacial shear strength is influenced by the diameter of the carbon nanotubes, but not by their length.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Applied

Flexible epoxy graphene thermoset with excellent weather and corrosion resistance

Zhi-Jin Li et al.

Summary: The study developed a functional graphene oxide/epoxy nanocomposite coating using a chemical-bonding-dispersed method for anticorrosion and weather resistance purposes. The nanocomposite demonstrated excellent durability under UV light, prevented yellowing of epoxy resin, and exhibited superior anticorrosion properties compared to physically blended dispersed composite and pure epoxy coating.

PROGRESS IN ORGANIC COATINGS (2021)

添加到收藏夹

Article Chemistry, Physical

Fabrication of water-resistant epoxy nanocomposite with improved dynamic mechanical properties and balanced thermal and dimensional stability: Study on dual role of graphene oxide nanosheets and barium oxide microparticles

Asha Bhanu A.V et al.

Summary: The study successfully developed a water-resistant epoxy nanocomposite by incorporating graphene oxide and barium oxide into the epoxy, reducing water diffusion while maintaining thermal and mechanical properties. The morphological studies revealed the presence of micro/nano-clusters of graphene oxide and barium oxide in the nanocomposites, enhancing hydrophobicity and creating a barrier to water diffusion. Dynamic mechanical analysis confirmed good viscoelastic performance and balanced thermal and dimensional stability of the epoxy nanocomposite.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Zinc-doped silica/polyaniline core/shell nanoparticles towards corrosion protection epoxy nanocomposite coatings

Seyyed Arash Haddadi et al.

Summary: Commercial paints and coatings are utilized to protect metallic substrates in corrosive environments, with nanostructures embedded in polymeric coatings for barrier and active protection. This research focused on the role of PANI as an active poly-electrolyte modifier for the surface modification of MSNs doped with Zn2+. Characterization techniques showed the formation of PANI shells on silica cores and the release of Zn2+ triggered by pH changes. The enhanced rheological, thermal, and mechanical characteristics of the PANI-coated nanoparticles in epoxy nanocomposite coatings demonstrated good dispersion and chemical interaction, leading to dual barrier/active protection properties.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Composites

Sandwich-structured graphene oxide@poly (aminophenol-formaldehyde) sheets for improved mechanical and thermal properties of epoxy resin

Tao Sun et al.

Summary: A wet chemical method was proposed to synthesize sandwich-structured graphene oxide@poly(aminophenol-formaldehyde) sheets, which showed good dispersion stability and enhanced mechanical and thermal properties in epoxy composites. The introduction of GO@PAPF sheets improved tensile strength, impact strength, and thermal stability of the composites, attributed to the large interfacial area, strong interfacial force, and good dispersion of the sheets in the epoxy matrix.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Polymer Science

Spectral characterization of morphological structure of organomodified montmorillonite clay-based epoxy nanocomposite

A. R. Annappa et al.

Summary: Organoclays have a significant impact on the formation of intercalated/exfoliated structures in epoxy-clay nanocomposites, as confirmed by spectral analysis. The presence of chemical bonds between epoxy and organoclays was revealed through FTIR analysis, while XRD analysis showed a significant increase in interlayer spacing. SEM imaging demonstrated excellent filler dispersion and distribution in the nanocomposite.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving tribological performance of epoxy composite by reinforcing with polyetheramine-functionalized graphene oxide

Tianjiao Bao et al.

Summary: This study focused on improving the tribological properties of epoxy resin by using polyetheramine-functionalized graphene oxide as a filler. The modified graphene enhanced friction coefficient and wear rate, while also improving thermal stability and mechanical properties of the composite materials. The interaction between the composite and transfer film played a key role in achieving excellent lubrication and anti-wear properties.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reinforcement of polymer nanocomposites by a-graphyne nanotubes: A multiscale simulation

Golnaz Najafi et al.

Summary: This study conducted simulations using molecular dynamics and finite element methods to investigate the elastic properties of a-graphyne nanotubes and their polymer nanocomposites. Results showed that a-graphyne nanotubes have a stronger interaction with polymer matrices compared to conventional carbon nanotubes, making them a better alternative for nanocomposite reinforcement technology. Additionally, the study examined the effects of various a-graphyne nanotubes on the mechanical properties of polymer nanocomposites, taking into consideration the non-isotropic elastic behavior of nanotubes.

COMPUTATIONAL MATERIALS SCIENCE (2021)

添加到收藏夹

Article Polymer Science

Attaching SiO2 nanoparticles to GO sheets via amino-terminated hyperbranched polymer for epoxy composites: Extraordinary improvement in thermal and mechanical properties

Lichun Ma et al.

Summary: Deposition of nano-silica on graphene oxide surface was designed to improve the dispersion and interfacial interaction between graphene oxide and epoxy resin, resulting in epoxy composites with enhanced mechanical and thermal properties. The reinforcing mechanisms and benefits of this approach for designing adhesive-bonded composite structures were also discussed.

EUROPEAN POLYMER JOURNAL (2021)

添加到收藏夹

Article Energy & Fuels

Impact of calcite surface roughness in wettability assessment: Interferometry and atomic force microscopy analysis

Wajdi Alnoush et al.

Summary: The study investigates the impact of surface roughness on wettability of calcite rocks, showing that decreasing surface roughness enhances wettability. Additionally, the consistency of wettability measurements and trends from different spots on the same surface was studied, with oil composition found to have a more significant impact on wettability.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of aluminium-graphene/carbon nanotubes (CNTs) metal matrix composites: Advancement, opportunities and perspective

Virat Khanna et al.

Summary: The rapid development of the mechanical industry requires new and reliable materials, with Metal Matrix Composites (MMCs) being one of the prominent candidates. Carbon nanostructures, such as graphene and carbon nanotubes (CNTs), are found to be excellent support reinforcement materials in MMCs. The study evaluates the impact of graphene/CNTs reinforcement in aluminum for improvement in mechanical properties, as well as reviewing different processing methods.

MATERIALS RESEARCH BULLETIN (2021)

添加到收藏夹

Article Polymer Science

Optimization of a commercial epoxy curing cycle via DSC data kinetics modelling and TTT plot construction

Christina Kyriakou Tziamtzi et al.

Summary: DSC experiments were conducted on a commercial bio-epoxy resin to study its curing reaction and glass transition; dynamic ramps and isothermal measurements were used to predict reaction temperatures and conversion rates; model-free kinetic analysis and the KS diffusion reaction model were utilized to reveal reaction mechanisms and determine the optimal curing temperature.

POLYMER (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Synthesis, characterization and electrical properties of conducting nanoparticles of graphene oxide

A. Ashery et al.

Summary: A novel method for producing graphene oxide-nanoparticles with high electrical conductivity was introduced in this work. By burning polyvinyl alcohol on the surface of SiO2/p-Si at a temperature of about 400°C, the method saved effort, time and money. The graphene oxide structure was confirmed using various techniques, and electrical properties were studied through I-V measurements and dielectric characteristics analysis.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Graphene/epoxy resins: Rheological behavior and morphological analysis by Atomic Force Microscopy (AFM)

Maria Rossella Nobile et al.

Summary: This study focuses on the rheological properties and morphological features of epoxy composites loaded with two similar graphene-based nanoplatelets, differing in exfoliation degree and concentration of carboxylated groups. The incorporation of GNP56 and GNP60 nanostructures significantly alters the rheological response of the nanofilled resin, showing viscoelastic behavior correlated with the morphology congruent with the difference in exfoliation degree.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Chemistry, Physical

Evaluation of anti-corrosion performance of modified gelatin-graphene oxide nanocomposite dispersed in epoxy coating on mild steel in saline media

Kamalon Rajitha et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

添加到收藏夹

Article Chemistry, Physical

Development of metal-organic framework (MOF) decorated graphene oxide nanoplatforms for anti-corrosion epoxy coatings

Mohammad Ramezanzadeh et al.

CARBON (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

An overview of industrial scalable production of graphene oxide and analytical approaches for synthesis and characterization

Rabia Ikram et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Thermodynamics

Development of new graphene/epoxy nanocomposites and study of cure kinetics, thermal and mechanical properties

Sheikh Rehman et al.

THERMOCHIMICA ACTA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Use of in-situ polymerization in the preparation of graphene / polymer nanocomposites

He-nan Mao et al.

NEW CARBON MATERIALS (2020)

添加到收藏夹

Article Polymer Science

Enhanced interfacial properties of graphene oxide incorporated carbon fiber reinforced epoxy nanocomposite: a systematic thermal properties investigation

Abhishek K. Pathak et al.

JOURNAL OF POLYMER RESEARCH (2019)

添加到收藏夹

Article Chemistry, Physical

Contact angle control of sessile drops on a tensioned web

Janghoon Park et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Electrical conductivity of carbon nanofiber reinforced resins: Potentiality of Tunneling Atomic Force Microscopy (TUNA) technique

Marialuigia Raimondo et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Multifunctional graphene/POSS epoxy resin tailored for aircraft lightning strike protection

Marialuigia Raimondo et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Mechanical

Fabrication and evaluation of silica aerogel-epoxy nanocomposites: Fracture and toughening mechanisms

Saeed Salimian et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of TSDC and dielectric modulus of PVDF-BaZrO3 nanocomposites thin film

Rohan Sagar et al.

VACUUM (2018)

添加到收藏夹

Article Energy & Fuels

Slag density and surface tension measurements by the constrained sessile drop method

Marc A. Duchesne et al.

FUEL (2017)

添加到收藏夹

Review Polymer Science

Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene

Vinay Deep Punetha et al.

PROGRESS IN POLYMER SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study

Izzuddin Zaman et al.

JOURNAL OF MATERIALS SCIENCE (2014)

添加到收藏夹

Review Materials Science, Composites

Graphene and modified graphene-based polymer nanocomposites - A review

N. Saravanan et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)

添加到收藏夹

Article Thermodynamics

The investigation of methyl phenyl silicone resin/epoxy resin using epoxy-polysiloxane as compatibilizer

Qiang Liu et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Glass transition improvement in epoxy/graphene composites

Helio Ribeiro et al.

JOURNAL OF MATERIALS SCIENCE (2013)

添加到收藏夹

Article Thermodynamics

Study of thermal stabilization for polystyrene/carbon nanocomposites via TG/DSC techniques

Sh A. Mansour

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)

添加到收藏夹

Article Thermodynamics

Thermal and morphological characteristics of solution blended epoxy/NBR compound

Hamidreza Ali-Asgari Dehaghi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)

添加到收藏夹

Article Thermodynamics

Coir-fiber-based fire retardant nano filler for epoxy composites

Akhil Kumar Sen et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2010)

添加到收藏夹

Review Materials Science, Characterization & Testing

Determination and review of specific heat capacity measurements during isothermal cure of an epoxy using TM-DSC and standard DSC techniques

J. McHugh et al.

POLYMER TESTING (2010)

添加到收藏夹

Review Polymer Science

Recent advances in graphene based polymer composites

Tapas Kuilla et al.

PROGRESS IN POLYMER SCIENCE (2010)

添加到收藏夹

Article Polymer Science

Toughening mechanisms of nanoparticle-modified epoxy polymers

B. B. Johnsen et al.

POLYMER (2007)

添加到收藏夹

Article Chemistry, Physical

Measurements of dynamic contact angles in solid-liquid-liquid systems at elevated pressures and temperatures

DN Rao

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.